| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200828104053.GM1826686@dell>
Date: Fri, 28 Aug 2020 11:40:53 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Gene Chen <gene.chen.richtek@...il.com>
Cc: matthias.bgg@...il.com, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
gene_chen@...htek.com, benjamin.chao@...iatek.com,
shufan_lee@...htek.com, cy_huang@...htek.com
Subject: Re: [PATCH v4 9/9] mfd: mt6360: Merge different sub-devices I2C
read/write
On Mon, 17 Aug 2020, Gene Chen wrote:
> From: Gene Chen <gene_chen@...htek.com>
>
> Remove unuse register definition.
This should be in a separate patch.
> Merge different sub-devices I2C read/write functions into one Regmap,
> because PMIC and LDO part need CRC bits for access protection.
>
> Signed-off-by: Gene Chen <gene_chen@...htek.com>
> ---
> drivers/mfd/Kconfig | 1 +
> drivers/mfd/mt6360-core.c | 260 +++++++++++++++++++++++++++++++++++++++------
> include/linux/mfd/mt6360.h | 240 -----------------------------------------
> 3 files changed, 226 insertions(+), 275 deletions(-)
> delete mode 100644 include/linux/mfd/mt6360.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index a37d7d1..0684ddc 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -913,6 +913,7 @@ config MFD_MT6360
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> + select CRC8
> depends on I2C
> help
> Say Y here to enable MT6360 PMU/PMIC/LDO functional support.
> diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
> index 677c974..e995220 100644
> --- a/drivers/mfd/mt6360-core.c
> +++ b/drivers/mfd/mt6360-core.c
> @@ -14,7 +14,53 @@
> #include <linux/regmap.h>
> #include <linux/slab.h>
>
> -#include <linux/mfd/mt6360.h>
> +enum {
> + MT6360_SLAVE_TCPC = 0,
> + MT6360_SLAVE_PMIC,
> + MT6360_SLAVE_LDO,
> + MT6360_SLAVE_PMU,
> + MT6360_SLAVE_MAX,
> +};
> +
> +struct mt6360_ddata {
> + struct i2c_client *i2c[MT6360_SLAVE_MAX];
> + struct device *dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *irq_data;
> + unsigned int chip_rev;
> + u8 crc8_tbl[CRC8_TABLE_SIZE];
> +};
This is not a new structure, right? Where was this before? Surely it
should be removed from wherever it was in the same patch that places
it here?
> +#define MT6360_TCPC_SLAVEID 0x4E
> +#define MT6360_PMIC_SLAVEID 0x1A
> +#define MT6360_LDO_SLAVEID 0x64
> +#define MT6360_PMU_SLAVEID 0x34
> +
> +#define MT6360_REG_TCPCSTART 0x00
> +#define MT6360_REG_TCPCEND 0xFF
> +#define MT6360_REG_PMICSTART 0x100
> +#define MT6360_REG_PMICEND 0x13B
> +#define MT6360_REG_LDOSTART 0x200
> +#define MT6360_REG_LDOEND 0x21C
> +#define MT6360_REG_PMUSTART 0x300
> +#define MT6360_PMU_DEV_INFO 0x300
> +#define MT6360_PMU_CHG_IRQ1 0x3D0
> +#define MT6360_PMU_CHG_MASK1 0x3F0
> +#define MT6360_REG_PMUEND 0x3FF
> +
> +#define MT6360_PMU_IRQ_REGNUM 16
> +
> +#define CHIP_VEN_MASK 0xF0
> +#define CHIP_VEN_MT6360 0x50
> +#define CHIP_REV_MASK 0x0F
> +
> +#define MT6360_ADDRESS_MASK 0x3F
> +#define MT6360_DATA_SIZE_1_BYTE 0x00
> +#define MT6360_DATA_SIZE_2_BYTES 0x40
> +#define MT6360_DATA_SIZE_3_BYTES 0x80
> +#define MT6360_DATA_SIZE_4_BYTES 0xC0
> +
> +#define MT6360_CRC8_POLYNOMIAL 0x7
>
> /* reg 0 -> 0 ~ 7 */
> #define MT6360_CHG_TREG_EVT 4
> @@ -220,12 +266,6 @@ static const struct regmap_irq_chip mt6360_irq_chip = {
> .use_ack = true,
> };
>
> -static const struct regmap_config mt6360_pmu_regmap_config = {
> - .reg_bits = 8,
> - .val_bits = 8,
> - .max_register = MT6360_PMU_MAXREG,
> -};
> -
> static const struct resource mt6360_adc_resources[] = {
> DEFINE_RES_IRQ_NAMED(MT6360_ADC_DONEI, "adc_donei"),
> };
> @@ -303,7 +343,7 @@ static int mt6360_check_vendor_info(struct mt6360_ddata *ddata)
> return ret;
>
> if ((info & CHIP_VEN_MASK) != CHIP_VEN_MT6360) {
> - dev_err(&client->dev, "Device not supported\n");
> + dev_err(ddata->dev, "Device not supported\n");
> return -ENODEV;
> }
>
> @@ -312,11 +352,163 @@ static int mt6360_check_vendor_info(struct mt6360_ddata *ddata)
> return 0;
> }
>
> -static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
> - MT6360_PMU_SLAVEID,
> +static const u16 mt6360_slave_addrs[MT6360_SLAVE_MAX] = {
Why are you changing the data type?
> + MT6360_TCPC_SLAVEID,
> MT6360_PMIC_SLAVEID,
> MT6360_LDO_SLAVEID,
> - MT6360_TCPC_SLAVEID,
> + MT6360_PMU_SLAVEID,
> +};
> +
> +static int mt6360_xlate_pmicldo_addr(u8 *addr, int rw_size)
> +{
> + /* Address is already in encoded [5:0] */
> + *addr &= MT6360_ADDRESS_MASK;
> +
> + switch (rw_size) {
> + case 1:
> + *addr |= MT6360_DATA_SIZE_1_BYTE;
> + break;
> + case 2:
> + *addr |= MT6360_DATA_SIZE_2_BYTES;
> + break;
> + case 3:
> + *addr |= MT6360_DATA_SIZE_3_BYTES;
> + break;
> + case 4:
> + *addr |= MT6360_DATA_SIZE_4_BYTES;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int mt6360_regmap_read(void *context, const void *reg, size_t reg_size,
> + void *val, size_t val_size)
> +{
> + struct mt6360_ddata *ddata = context;
> + u8 bank = *(u8 *)reg, reg_addr = *(u8 *)(reg + 1);
This is messy. Put them on separate lines.
> + struct i2c_client *i2c = ddata->i2c[bank];
> + bool crc_needed = false;
> + u8 *buf;
> + /* first two is i2c_addr + reg_addr , last is crc8 */
First two what?
> + int alloc_size = 2 + val_size + 1, read_size = val_size;
Put these on separate lines also please.
'alloc_size' should probably be 'buf_len'.
Please define the magic numbers.
> + u8 crc;
> + int ret;
> +
> + if (bank == MT6360_SLAVE_PMIC || bank == MT6360_SLAVE_LDO) {
> + crc_needed = true;
> + ret = mt6360_xlate_pmicldo_addr(®_addr, val_size);
> + if (ret < 0)
> + return ret;
> + read_size += 1;
> + }
> +
> + buf = kzalloc(alloc_size, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + /* 7 bit slave addr + read bit */
> + buf[0] = ((i2c->addr & 0x7f) << 1) + 1;
Please define these magic numbers.
> + buf[1] = reg_addr;
> +
> + ret = i2c_smbus_read_i2c_block_data(i2c, reg_addr, read_size, buf + 2);
Why plus 2? Maybe define it.
> + if (ret == read_size) {
> + memcpy(val, buf + 2, val_size);
As above.
> + if (crc_needed) {
> + crc = crc8(ddata->crc8_tbl, buf, val_size + 2, 0);
> + if (crc != buf[val_size + 2])
> + ret = -EIO;
> + }
> + }
> +
> + kfree(buf);
> +
> + if (ret < 0)
> + return ret;
> + else if (ret != read_size)
> + return -EIO;
> +
> + return 0;
I think this reads better (be sure to check the semantics):
ret = i2c_smbus_read_i2c_block_data(i2c, reg_addr, read_size, buf + 2);
if (ret < 0)
goto out;
if (ret != read_size) {
ret -EIO;
goto out;
}
memcpy(val, buf + 2, val_size);
if (crc_needed) {
crc = crc8(ddata->crc8_tbl, buf, val_size + 2, 0);
if (crc != buf[val_size + 2])
ret = -EIO;
}
out:
kfree(buf);
return 0;
> +}
> +
> +static int mt6360_regmap_write(void *context, const void *val, size_t val_size)
> +{
> + struct mt6360_ddata *ddata = context;
> + u8 bank = *(u8 *)val, reg_addr = *(u8 *)(val + 1);
> + struct i2c_client *i2c = ddata->i2c[bank];
> + bool crc_needed = false;
> + u8 *buf;
> + /* first two is i2c_addr + reg_addr , last crc8 + dummy */
> + int alloc_size = 2 + val_size + 2, write_size = val_size - 2;
> + int ret;
Same comments as above.
> + if (bank == MT6360_SLAVE_PMIC || bank == MT6360_SLAVE_LDO) {
> + crc_needed = true;
> + ret = mt6360_xlate_pmicldo_addr(®_addr, val_size - 2);
> + if (ret < 0)
> + return ret;
> + }
> +
> + buf = kzalloc(alloc_size, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + /* 7 bit slave addr + write bit */
> + buf[0] = ((i2c->addr & 0x7f) << 1);
> + buf[1] = reg_addr;
> + /* val need to minus regaddr 16bit */
> + memcpy(buf + 2, val + 2, write_size);
> +
> + if (crc_needed) {
> + buf[val_size] = crc8(ddata->crc8_tbl, buf, val_size, 0);
> + write_size += 2;
> + }
> +
> + ret = i2c_smbus_write_i2c_block_data(i2c, reg_addr, write_size, buf + 2);
No check for (ret == write_size)?
> + kfree(buf);
> +
> + if (ret < 0)
> + return ret;
> +
> + return 0;
How about:
ret = i2c_smbus_write_i2c_block_data(i2c, reg_addr, write_size, buf + 2);
if (ret > 0)
ret = 0;
kfree(buf);
return ret;
> +}
> +
> +static const struct regmap_bus mt6360_regmap_bus = {
> + .read = mt6360_regmap_read,
> + .write = mt6360_regmap_write,
> +
> + /* due to pmic and ldo crc access size limit */
"Due to PMIC and LDO CRC access ..."
> + .max_raw_read = 4,
> + .max_raw_write = 4,
> +};
> +
> +static bool mt6360_is_readwrite_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case MT6360_REG_TCPCSTART ... MT6360_REG_TCPCEND:
> + fallthrough;
> + case MT6360_REG_PMICSTART ... MT6360_REG_PMICEND:
> + fallthrough;
> + case MT6360_REG_LDOSTART ... MT6360_REG_LDOEND:
> + fallthrough;
> + case MT6360_REG_PMUSTART ... MT6360_REG_PMUEND:
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static const struct regmap_config mt6360_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .reg_format_endian = REGMAP_ENDIAN_BIG,
> + .max_register = MT6360_REG_PMUEND,
> + .writeable_reg = mt6360_is_readwrite_reg,
> + .readable_reg = mt6360_is_readwrite_reg,
> };
>
> static int mt6360_probe(struct i2c_client *client)
> @@ -329,9 +521,23 @@ static int mt6360_probe(struct i2c_client *client)
> return -ENOMEM;
>
> ddata->dev = &client->dev;
> - i2c_set_clientdata(client, ddata);
>
> - ddata->regmap = devm_regmap_init_i2c(client, &mt6360_pmu_regmap_config);
> + for (i = 0; i < MT6360_SLAVE_MAX - 1; i++) {
> + ddata->i2c[i] = devm_i2c_new_dummy_device(&client->dev,
> + client->adapter,
> + mt6360_slave_addrs[i]);
> + if (IS_ERR(ddata->i2c[i])) {
> + dev_err(&client->dev,
> + "Failed to get new dummy I2C device for address 0x%x",
> + mt6360_slave_addrs[i]);
> + return PTR_ERR(ddata->i2c[i]);
Do you have to free the new devices you just allocated?
> + }
> + }
> + ddata->i2c[MT6360_SLAVE_MAX - 1] = client;
> +
> + crc8_populate_msb(ddata->crc8_tbl, MT6360_CRC8_POLYNOMIAL);
> + ddata->regmap = __devm_regmap_init(ddata->dev, &mt6360_regmap_bus, ddata,
> + &mt6360_regmap_config, NULL, NULL);
Why "__devm_*"? Isn't that an internal function?
> if (IS_ERR(ddata->regmap)) {
> dev_err(&client->dev, "Failed to register regmap\n");
> return PTR_ERR(ddata->regmap);
> @@ -341,34 +547,18 @@ static int mt6360_probe(struct i2c_client *client)
> if (ret)
> return ret;
>
> - ret = devm_regmap_add_irq_chip(&client->dev, ddata->regmap, client->irq,
> - 0, 0, &mt6360_irq_chip,
> - &ddata->irq_data);
> + ret = devm_regmap_add_irq_chip(&client->dev, ddata->regmap, client->irq, 0, 0,
> + &mt6360_irq_chip, &ddata->irq_data);
> if (ret) {
> dev_err(&client->dev, "Failed to add Regmap IRQ Chip\n");
> return ret;
> }
>
> - ddata->i2c[0] = client;
> - for (i = 1; i < MT6360_SLAVE_MAX; i++) {
> - ddata->i2c[i] = devm_i2c_new_dummy_device(&client->dev,
> - client->adapter,
> - mt6360_slave_addr[i]);
> - if (IS_ERR(ddata->i2c[i])) {
> - dev_err(&client->dev,
> - "Failed to get new dummy I2C device for address 0x%x",
> - mt6360_slave_addr[i]);
> - return PTR_ERR(ddata->i2c[i]);
> - }
> - i2c_set_clientdata(ddata->i2c[i], ddata);
> - }
> -
> - ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO,
> - mt6360_devs, ARRAY_SIZE(mt6360_devs), NULL,
> - 0, regmap_irq_get_domain(ddata->irq_data));
> + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, mt6360_devs,
> + ARRAY_SIZE(mt6360_devs), NULL, 0,
> + regmap_irq_get_domain(ddata->irq_data));
> if (ret) {
> - dev_err(&client->dev,
> - "Failed to register subordinate devices\n");
> + dev_err(&client->dev, "Failed to register subordinate devices\n");
> return ret;
> }
>
> diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h
> deleted file mode 100644
> index da0fb5c..0000000
> --- a/include/linux/mfd/mt6360.h
> +++ /dev/null
> @@ -1,240 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * Copyright (c) 2020 MediaTek Inc.
> - */
> -
> -#ifndef __MT6360_H__
> -#define __MT6360_H__
> -
> -#include <linux/regmap.h>
> -
> -enum {
> - MT6360_SLAVE_PMU = 0,
> - MT6360_SLAVE_PMIC,
> - MT6360_SLAVE_LDO,
> - MT6360_SLAVE_TCPC,
> - MT6360_SLAVE_MAX,
> -};
> -
> -#define MT6360_PMU_SLAVEID 0x34
> -#define MT6360_PMIC_SLAVEID 0x1A
> -#define MT6360_LDO_SLAVEID 0x64
> -#define MT6360_TCPC_SLAVEID 0x4E
> -
> -struct mt6360_data {
> - struct i2c_client *i2c[MT6360_SLAVE_MAX];
> - struct device *dev;
> - struct regmap *regmap;
> - struct regmap_irq_chip_data *irq_data;
> - unsigned int chip_rev;
> -};
> -
> -/* PMU register defininition */
> -#define MT6360_PMU_DEV_INFO 0x00
> -#define MT6360_PMU_CORE_CTRL1 0x01
> -#define MT6360_PMU_RST1 0x02
> -#define MT6360_PMU_CRCEN 0x03
> -#define MT6360_PMU_RST_PAS_CODE1 0x04
> -#define MT6360_PMU_RST_PAS_CODE2 0x05
> -#define MT6360_PMU_CORE_CTRL2 0x06
> -#define MT6360_PMU_TM_PAS_CODE1 0x07
> -#define MT6360_PMU_TM_PAS_CODE2 0x08
> -#define MT6360_PMU_TM_PAS_CODE3 0x09
> -#define MT6360_PMU_TM_PAS_CODE4 0x0A
> -#define MT6360_PMU_IRQ_IND 0x0B
> -#define MT6360_PMU_IRQ_MASK 0x0C
> -#define MT6360_PMU_IRQ_SET 0x0D
> -#define MT6360_PMU_SHDN_CTRL 0x0E
> -#define MT6360_PMU_TM_INF 0x0F
> -#define MT6360_PMU_I2C_CTRL 0x10
> -#define MT6360_PMU_CHG_CTRL1 0x11
> -#define MT6360_PMU_CHG_CTRL2 0x12
> -#define MT6360_PMU_CHG_CTRL3 0x13
> -#define MT6360_PMU_CHG_CTRL4 0x14
> -#define MT6360_PMU_CHG_CTRL5 0x15
> -#define MT6360_PMU_CHG_CTRL6 0x16
> -#define MT6360_PMU_CHG_CTRL7 0x17
> -#define MT6360_PMU_CHG_CTRL8 0x18
> -#define MT6360_PMU_CHG_CTRL9 0x19
> -#define MT6360_PMU_CHG_CTRL10 0x1A
> -#define MT6360_PMU_CHG_CTRL11 0x1B
> -#define MT6360_PMU_CHG_CTRL12 0x1C
> -#define MT6360_PMU_CHG_CTRL13 0x1D
> -#define MT6360_PMU_CHG_CTRL14 0x1E
> -#define MT6360_PMU_CHG_CTRL15 0x1F
> -#define MT6360_PMU_CHG_CTRL16 0x20
> -#define MT6360_PMU_CHG_AICC_RESULT 0x21
> -#define MT6360_PMU_DEVICE_TYPE 0x22
> -#define MT6360_PMU_QC_CONTROL1 0x23
> -#define MT6360_PMU_QC_CONTROL2 0x24
> -#define MT6360_PMU_QC30_CONTROL1 0x25
> -#define MT6360_PMU_QC30_CONTROL2 0x26
> -#define MT6360_PMU_USB_STATUS1 0x27
> -#define MT6360_PMU_QC_STATUS1 0x28
> -#define MT6360_PMU_QC_STATUS2 0x29
> -#define MT6360_PMU_CHG_PUMP 0x2A
> -#define MT6360_PMU_CHG_CTRL17 0x2B
> -#define MT6360_PMU_CHG_CTRL18 0x2C
> -#define MT6360_PMU_CHRDET_CTRL1 0x2D
> -#define MT6360_PMU_CHRDET_CTRL2 0x2E
> -#define MT6360_PMU_DPDN_CTRL 0x2F
> -#define MT6360_PMU_CHG_HIDDEN_CTRL1 0x30
> -#define MT6360_PMU_CHG_HIDDEN_CTRL2 0x31
> -#define MT6360_PMU_CHG_HIDDEN_CTRL3 0x32
> -#define MT6360_PMU_CHG_HIDDEN_CTRL4 0x33
> -#define MT6360_PMU_CHG_HIDDEN_CTRL5 0x34
> -#define MT6360_PMU_CHG_HIDDEN_CTRL6 0x35
> -#define MT6360_PMU_CHG_HIDDEN_CTRL7 0x36
> -#define MT6360_PMU_CHG_HIDDEN_CTRL8 0x37
> -#define MT6360_PMU_CHG_HIDDEN_CTRL9 0x38
> -#define MT6360_PMU_CHG_HIDDEN_CTRL10 0x39
> -#define MT6360_PMU_CHG_HIDDEN_CTRL11 0x3A
> -#define MT6360_PMU_CHG_HIDDEN_CTRL12 0x3B
> -#define MT6360_PMU_CHG_HIDDEN_CTRL13 0x3C
> -#define MT6360_PMU_CHG_HIDDEN_CTRL14 0x3D
> -#define MT6360_PMU_CHG_HIDDEN_CTRL15 0x3E
> -#define MT6360_PMU_CHG_HIDDEN_CTRL16 0x3F
> -#define MT6360_PMU_CHG_HIDDEN_CTRL17 0x40
> -#define MT6360_PMU_CHG_HIDDEN_CTRL18 0x41
> -#define MT6360_PMU_CHG_HIDDEN_CTRL19 0x42
> -#define MT6360_PMU_CHG_HIDDEN_CTRL20 0x43
> -#define MT6360_PMU_CHG_HIDDEN_CTRL21 0x44
> -#define MT6360_PMU_CHG_HIDDEN_CTRL22 0x45
> -#define MT6360_PMU_CHG_HIDDEN_CTRL23 0x46
> -#define MT6360_PMU_CHG_HIDDEN_CTRL24 0x47
> -#define MT6360_PMU_CHG_HIDDEN_CTRL25 0x48
> -#define MT6360_PMU_BC12_CTRL 0x49
> -#define MT6360_PMU_CHG_STAT 0x4A
> -#define MT6360_PMU_RESV1 0x4B
> -#define MT6360_PMU_TYPEC_OTP_TH_SEL_CODEH 0x4E
> -#define MT6360_PMU_TYPEC_OTP_TH_SEL_CODEL 0x4F
> -#define MT6360_PMU_TYPEC_OTP_HYST_TH 0x50
> -#define MT6360_PMU_TYPEC_OTP_CTRL 0x51
> -#define MT6360_PMU_ADC_BAT_DATA_H 0x52
> -#define MT6360_PMU_ADC_BAT_DATA_L 0x53
> -#define MT6360_PMU_IMID_BACKBST_ON 0x54
> -#define MT6360_PMU_IMID_BACKBST_OFF 0x55
> -#define MT6360_PMU_ADC_CONFIG 0x56
> -#define MT6360_PMU_ADC_EN2 0x57
> -#define MT6360_PMU_ADC_IDLE_T 0x58
> -#define MT6360_PMU_ADC_RPT_1 0x5A
> -#define MT6360_PMU_ADC_RPT_2 0x5B
> -#define MT6360_PMU_ADC_RPT_3 0x5C
> -#define MT6360_PMU_ADC_RPT_ORG1 0x5D
> -#define MT6360_PMU_ADC_RPT_ORG2 0x5E
> -#define MT6360_PMU_BAT_OVP_TH_SEL_CODEH 0x5F
> -#define MT6360_PMU_BAT_OVP_TH_SEL_CODEL 0x60
> -#define MT6360_PMU_CHG_CTRL19 0x61
> -#define MT6360_PMU_VDDASUPPLY 0x62
> -#define MT6360_PMU_BC12_MANUAL 0x63
> -#define MT6360_PMU_CHGDET_FUNC 0x64
> -#define MT6360_PMU_FOD_CTRL 0x65
> -#define MT6360_PMU_CHG_CTRL20 0x66
> -#define MT6360_PMU_CHG_HIDDEN_CTRL26 0x67
> -#define MT6360_PMU_CHG_HIDDEN_CTRL27 0x68
> -#define MT6360_PMU_RESV2 0x69
> -#define MT6360_PMU_USBID_CTRL1 0x6D
> -#define MT6360_PMU_USBID_CTRL2 0x6E
> -#define MT6360_PMU_USBID_CTRL3 0x6F
> -#define MT6360_PMU_FLED_CFG 0x70
> -#define MT6360_PMU_RESV3 0x71
> -#define MT6360_PMU_FLED1_CTRL 0x72
> -#define MT6360_PMU_FLED_STRB_CTRL 0x73
> -#define MT6360_PMU_FLED1_STRB_CTRL2 0x74
> -#define MT6360_PMU_FLED1_TOR_CTRL 0x75
> -#define MT6360_PMU_FLED2_CTRL 0x76
> -#define MT6360_PMU_RESV4 0x77
> -#define MT6360_PMU_FLED2_STRB_CTRL2 0x78
> -#define MT6360_PMU_FLED2_TOR_CTRL 0x79
> -#define MT6360_PMU_FLED_VMIDTRK_CTRL1 0x7A
> -#define MT6360_PMU_FLED_VMID_RTM 0x7B
> -#define MT6360_PMU_FLED_VMIDTRK_CTRL2 0x7C
> -#define MT6360_PMU_FLED_PWSEL 0x7D
> -#define MT6360_PMU_FLED_EN 0x7E
> -#define MT6360_PMU_FLED_Hidden1 0x7F
> -#define MT6360_PMU_RGB_EN 0x80
> -#define MT6360_PMU_RGB1_ISNK 0x81
> -#define MT6360_PMU_RGB2_ISNK 0x82
> -#define MT6360_PMU_RGB3_ISNK 0x83
> -#define MT6360_PMU_RGB_ML_ISNK 0x84
> -#define MT6360_PMU_RGB1_DIM 0x85
> -#define MT6360_PMU_RGB2_DIM 0x86
> -#define MT6360_PMU_RGB3_DIM 0x87
> -#define MT6360_PMU_RESV5 0x88
> -#define MT6360_PMU_RGB12_Freq 0x89
> -#define MT6360_PMU_RGB34_Freq 0x8A
> -#define MT6360_PMU_RGB1_Tr 0x8B
> -#define MT6360_PMU_RGB1_Tf 0x8C
> -#define MT6360_PMU_RGB1_TON_TOFF 0x8D
> -#define MT6360_PMU_RGB2_Tr 0x8E
> -#define MT6360_PMU_RGB2_Tf 0x8F
> -#define MT6360_PMU_RGB2_TON_TOFF 0x90
> -#define MT6360_PMU_RGB3_Tr 0x91
> -#define MT6360_PMU_RGB3_Tf 0x92
> -#define MT6360_PMU_RGB3_TON_TOFF 0x93
> -#define MT6360_PMU_RGB_Hidden_CTRL1 0x94
> -#define MT6360_PMU_RGB_Hidden_CTRL2 0x95
> -#define MT6360_PMU_RESV6 0x97
> -#define MT6360_PMU_SPARE1 0x9A
> -#define MT6360_PMU_SPARE2 0xA0
> -#define MT6360_PMU_SPARE3 0xB0
> -#define MT6360_PMU_SPARE4 0xC0
> -#define MT6360_PMU_CHG_IRQ1 0xD0
> -#define MT6360_PMU_CHG_IRQ2 0xD1
> -#define MT6360_PMU_CHG_IRQ3 0xD2
> -#define MT6360_PMU_CHG_IRQ4 0xD3
> -#define MT6360_PMU_CHG_IRQ5 0xD4
> -#define MT6360_PMU_CHG_IRQ6 0xD5
> -#define MT6360_PMU_QC_IRQ 0xD6
> -#define MT6360_PMU_FOD_IRQ 0xD7
> -#define MT6360_PMU_BASE_IRQ 0xD8
> -#define MT6360_PMU_FLED_IRQ1 0xD9
> -#define MT6360_PMU_FLED_IRQ2 0xDA
> -#define MT6360_PMU_RGB_IRQ 0xDB
> -#define MT6360_PMU_BUCK1_IRQ 0xDC
> -#define MT6360_PMU_BUCK2_IRQ 0xDD
> -#define MT6360_PMU_LDO_IRQ1 0xDE
> -#define MT6360_PMU_LDO_IRQ2 0xDF
> -#define MT6360_PMU_CHG_STAT1 0xE0
> -#define MT6360_PMU_CHG_STAT2 0xE1
> -#define MT6360_PMU_CHG_STAT3 0xE2
> -#define MT6360_PMU_CHG_STAT4 0xE3
> -#define MT6360_PMU_CHG_STAT5 0xE4
> -#define MT6360_PMU_CHG_STAT6 0xE5
> -#define MT6360_PMU_QC_STAT 0xE6
> -#define MT6360_PMU_FOD_STAT 0xE7
> -#define MT6360_PMU_BASE_STAT 0xE8
> -#define MT6360_PMU_FLED_STAT1 0xE9
> -#define MT6360_PMU_FLED_STAT2 0xEA
> -#define MT6360_PMU_RGB_STAT 0xEB
> -#define MT6360_PMU_BUCK1_STAT 0xEC
> -#define MT6360_PMU_BUCK2_STAT 0xED
> -#define MT6360_PMU_LDO_STAT1 0xEE
> -#define MT6360_PMU_LDO_STAT2 0xEF
> -#define MT6360_PMU_CHG_MASK1 0xF0
> -#define MT6360_PMU_CHG_MASK2 0xF1
> -#define MT6360_PMU_CHG_MASK3 0xF2
> -#define MT6360_PMU_CHG_MASK4 0xF3
> -#define MT6360_PMU_CHG_MASK5 0xF4
> -#define MT6360_PMU_CHG_MASK6 0xF5
> -#define MT6360_PMU_QC_MASK 0xF6
> -#define MT6360_PMU_FOD_MASK 0xF7
> -#define MT6360_PMU_BASE_MASK 0xF8
> -#define MT6360_PMU_FLED_MASK1 0xF9
> -#define MT6360_PMU_FLED_MASK2 0xFA
> -#define MT6360_PMU_FAULTB_MASK 0xFB
> -#define MT6360_PMU_BUCK1_MASK 0xFC
> -#define MT6360_PMU_BUCK2_MASK 0xFD
> -#define MT6360_PMU_LDO_MASK1 0xFE
> -#define MT6360_PMU_LDO_MASK2 0xFF
> -#define MT6360_PMU_MAXREG MT6360_PMU_LDO_MASK2
> -
> -/* MT6360_PMU_IRQ_SET */
> -#define MT6360_PMU_IRQ_REGNUM 16
> -#define MT6360_IRQ_RETRIG BIT(2)
> -
> -#define CHIP_VEN_MASK 0xF0
> -#define CHIP_VEN_MT6360 0x50
> -#define CHIP_REV_MASK 0x0F
> -
> -#endif /* __MT6360_H__ */
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists