| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1598621996-31040-6-git-send-email-shubhrajyoti.datta@xilinx.com>
Date: Fri, 28 Aug 2020 19:09:53 +0530
From: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
To: linux-clk@...r.kernel.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
devel@...verdev.osuosl.org, sboyd@...nel.org, robh+dt@...nel.org,
gregkh@...uxfoundation.org, mturquette@...libre.com,
Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Subject: [PATCH v6 5/8] clk: clock-wizard: Add support for fractional support
Currently the set rate granularity is to integral divisors.
Add support for the fractional divisors.
Only the first output0 is fractional in the hardware.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
---
v6:
remove unnecessary typecast
remove unnecessary locks
use polled timeout
drivers/clk/clk-xlnx-clock-wizard.c | 166 +++++++++++++++++++++++++++++++++---
1 file changed, 153 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
index 8dfcec8..1af59a4 100644
--- a/drivers/clk/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -29,20 +29,25 @@
#define WZRD_CLKFBOUT_MULT_SHIFT 8
#define WZRD_CLKFBOUT_MULT_MASK (0xff << WZRD_CLKFBOUT_MULT_SHIFT)
+#define WZRD_CLKFBOUT_FRAC_SHIFT 16
+#define WZRD_CLKFBOUT_FRAC_MASK (0x3ff << WZRD_CLKFBOUT_FRAC_SHIFT)
#define WZRD_DIVCLK_DIVIDE_SHIFT 0
#define WZRD_DIVCLK_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
#define WZRD_CLKOUT_DIVIDE_SHIFT 0
#define WZRD_CLKOUT_DIVIDE_WIDTH 8
#define WZRD_CLKOUT_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_FRAC_SHIFT 8
+#define WZRD_CLKOUT_FRAC_MASK 0x3ff
#define WZRD_DR_MAX_INT_DIV_VALUE 255
-#define WZRD_DR_NUM_RETRIES 10000
#define WZRD_DR_STATUS_REG_OFFSET 0x04
#define WZRD_DR_LOCK_BIT_MASK 0x00000001
#define WZRD_DR_INIT_REG_OFFSET 0x25C
#define WZRD_DR_DIV_TO_PHASE_OFFSET 4
#define WZRD_DR_BEGIN_DYNA_RECONF 0x03
+#define WZRD_USEC_POLL 10
+#define WZRD_TIMEOUT_POLL 1000
/* Get the mask from width */
#define div_mask(width) ((1 << (width)) - 1)
@@ -52,6 +57,7 @@
enum clk_wzrd_int_clks {
wzrd_clk_mul,
wzrd_clk_mul_div,
+ wzrd_clk_mul_frac,
wzrd_clk_int_max
};
@@ -185,6 +191,134 @@ static const struct clk_ops clk_wzrd_clk_divider_ops = {
.recalc_rate = clk_wzrd_recalc_rate,
};
+static unsigned long clk_wzrd_recalc_ratef(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned int val;
+ u32 div, frac;
+ struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+ void __iomem *div_addr = divider->base + divider->offset;
+
+ val = readl(div_addr);
+ div = val & div_mask(divider->width);
+ frac = (val >> WZRD_CLKOUT_FRAC_SHIFT) & WZRD_CLKOUT_FRAC_MASK;
+
+ return ((parent_rate * 1000) / ((div * 1000) + frac));
+}
+
+static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int err;
+ u32 value, pre;
+ unsigned long rate_div, f, clockout0_div;
+ struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+ void __iomem *div_addr = divider->base + divider->offset;
+
+ rate_div = ((parent_rate * 1000) / rate);
+ clockout0_div = rate_div / 1000;
+
+ pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
+ f = (u32)(pre - (clockout0_div * 1000));
+ f = f & WZRD_CLKOUT_FRAC_MASK;
+
+ value = ((f << WZRD_CLKOUT_DIVIDE_WIDTH) | (clockout0_div &
+ WZRD_CLKOUT_DIVIDE_MASK));
+
+ /* Set divisor and clear phase offset */
+ writel(value, div_addr);
+ writel(0x0, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
+
+ /* Check status register */
+ err= readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
+ value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+ if (err)
+ return err;
+
+ /* Initiate reconfiguration */
+ writel(WZRD_DR_BEGIN_DYNA_RECONF,
+ divider->base + WZRD_DR_INIT_REG_OFFSET);
+
+ /* Check status register */
+ err= readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
+ value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+
+ return err;
+}
+
+static long clk_wzrd_round_rate_f(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+static const struct clk_ops clk_wzrd_clk_divider_ops_f = {
+ .round_rate = clk_wzrd_round_rate_f,
+ .set_rate = clk_wzrd_dynamic_reconfig_f,
+ .recalc_rate = clk_wzrd_recalc_ratef,
+};
+
+static struct clk *clk_wzrd_register_divf(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ void __iomem *base, u16 offset,
+ u8 shift, u8 width,
+ u8 clk_divider_flags,
+ const struct clk_div_table *table,
+ spinlock_t *lock)
+{
+ struct clk_wzrd_divider *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
+ if (width + shift > 16) {
+ pr_warn("divider value exceeds LOWORD field\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* allocate the divider */
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+
+ if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+ init.ops = &clk_divider_ro_ops;
+ else
+ init.ops = &clk_wzrd_clk_divider_ops_f;
+
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_divider assignments */
+ div->base = base;
+ div->offset = offset;
+ div->shift = shift;
+ div->width = width;
+ div->flags = clk_divider_flags;
+ div->lock = lock;
+ div->hw.init = &init;
+ div->table = table;
+
+ /* register the clock */
+ hw = &div->hw;
+ ret = clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(div);
+ return ERR_PTR(ret);
+ }
+
+ return hw->clk;
+}
+
static struct clk *clk_wzrd_register_divider(struct device *dev,
const char *name,
const char *parent_name,
@@ -303,7 +437,7 @@ static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
static int clk_wzrd_probe(struct platform_device *pdev)
{
int i, ret;
- u32 reg;
+ u32 reg, reg_f, mult;
unsigned long rate;
const char *clk_name;
struct clk_wzrd *clk_wzrd;
@@ -355,17 +489,13 @@ static int clk_wzrd_probe(struct platform_device *pdev)
goto err_disable_clk;
}
- /* we don't support fractional div/mul yet */
- reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_CLKFBOUT_FRAC_EN;
- reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) &
- WZRD_CLKOUT0_FRAC_EN;
- if (reg)
- dev_warn(&pdev->dev, "fractional div/mul not supported\n");
-
/* register multiplier */
reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT;
+ reg_f = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
+ WZRD_CLKFBOUT_FRAC_MASK) >> WZRD_CLKFBOUT_FRAC_SHIFT;
+
+ mult = ((reg * 1000) + reg_f);
clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
if (!clk_name) {
ret = -ENOMEM;
@@ -374,7 +504,7 @@ static int clk_wzrd_probe(struct platform_device *pdev)
clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
(&pdev->dev, clk_name,
__clk_get_name(clk_wzrd->clk_in1),
- 0, reg, 1);
+ 0, mult, 1000);
kfree(clk_name);
if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
@@ -413,8 +543,18 @@ static int clk_wzrd_probe(struct platform_device *pdev)
ret = -EINVAL;
goto err_rm_int_clks;
}
- clk_wzrd->clkout[i] = clk_wzrd_register_divider(&pdev->dev,
- clkout_name,
+ if (!i)
+ clk_wzrd->clkout[i] = clk_wzrd_register_divf
+ (&pdev->dev, clkout_name,
+ clk_name, 0,
+ clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+ WZRD_CLKOUT_DIVIDE_SHIFT,
+ WZRD_CLKOUT_DIVIDE_WIDTH,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ NULL, &clkwzrd_lock);
+ else
+ clk_wzrd->clkout[i] = clk_wzrd_register_divider
+ (&pdev->dev, clkout_name,
clk_name, 0,
clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
WZRD_CLKOUT_DIVIDE_SHIFT,
--
2.1.1
Powered by blists - more mailing lists