[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200829142501.31478-9-krzk@kernel.org>
Date: Sat, 29 Aug 2020 16:25:00 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Lee Jones <lee.jones@...aro.org>,
Sangbeom Kim <sbkim73@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
alsa-devel@...a-project.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Sylwester Nawrocki <snawrocki@...nel.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Inki Dae <inki.dae@...sung.com>
Subject: [RFT 09/10] arm64: dts: exynos: Correct port of USB-C connector node on Exynos5433 TM2
The USB-C connector bindings require port@0. Such port was already
described in DTS but outside of the connector itself. Put it into
proper place to fix dtbs_check warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: musb_connector: ports: 'port@0' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
Not tested on HQ. Please kindly review and test.
Best regards,
Krzysztof
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6246cce2a15e..bab6c1addd5f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -871,6 +871,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+
port@3 {
reg = <3>;
musb_con_to_mhl: endpoint {
@@ -879,14 +886,6 @@
};
};
};
-
- ports {
- port {
- muic_to_usb: endpoint {
- remote-endpoint = <&usb_to_muic>;
- };
- };
- };
};
regulators {
--
2.17.1
Powered by blists - more mailing lists