[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200829055846.19034-3-wcheng@codeaurora.org>
Date: Fri, 28 Aug 2020 22:58:42 -0700
From: Wesley Cheng <wcheng@...eaurora.org>
To: robh+dt@...nel.org, bjorn.andersson@...aro.org, balbi@...nel.org,
gregkh@...uxfoundation.org, agross@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-usb@...r.kernel.org,
jackp@...eaurora.org, Wesley Cheng <wcheng@...eaurora.org>
Subject: [RFC v5 2/6] arm64: boot: dts: qcom: sm8150: Enable dynamic TX FIFO resize logic
Enable the flexible TX FIFO resize logic on SM8150. Using a larger TX FIFO
SZ can help account for situations when system latency is greater than the
USB bus transmission latency.
Signed-off-by: Wesley Cheng <wcheng@...eaurora.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 7a0c5b419ff0..169ac4c8e298 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -717,6 +717,7 @@ usb_1_dwc3: dwc3@...0000 {
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
+ tx-fifo-resize;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists