| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200830195748.30221-2-avolmat@me.com>
Date: Sun, 30 Aug 2020 21:57:47 +0200
From: Alain Volmat <avolmat@...com>
To: Russell King <linux@...linux.org.uk>,
Arnd Bergmann <arnd@...db.de>,
Sascha Hauer <s.hauer@...gutronix.de>,
Olof Johansson <olof@...om.net>,
Linus Walleij <linus.walleij@...aro.org>,
Nathan Huckleberry <nhuck15@...il.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
Enrico Weigelt <info@...ux.net>,
Thomas Gleixner <tglx@...utronix.de>,
Kate Stewart <kstewart@...uxfoundation.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: patrice.chotard@...com, avolmat@...com
Subject: [PATCH v2 1/2] arm: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
Update the sti platform LL_UART support to rely on
CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT from Kconfig
Signed-off-by: Alain Volmat <avolmat@...com>
---
arch/arm/Kconfig.debug | 23 ++++++++++++-----------
arch/arm/include/debug/sti.S | 26 ++------------------------
2 files changed, 14 insertions(+), 35 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 80000a66a4e3..e97d6e5c8898 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1184,10 +1184,9 @@ choice
Say Y here if you want kernel low-level debugging support
on ST SPEAr13xx based platforms.
- config STIH41X_DEBUG_ASC2
+ config DEBUG_STIH41X_ASC2
bool "Use StiH415/416 ASC2 UART for low-level debug"
depends on ARCH_STI
- select DEBUG_STI_UART
help
Say Y here if you want kernel low-level debugging support
on STiH415/416 based platforms like b2000, which has
@@ -1195,10 +1194,9 @@ choice
If unsure, say N.
- config STIH41X_DEBUG_SBC_ASC1
+ config DEBUG_STIH41X_SBC_ASC1
bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
depends on ARCH_STI
- select DEBUG_STI_UART
help
Say Y here if you want kernel low-level debugging support
on STiH415/416 based platforms like b2020. which has
@@ -1534,10 +1532,6 @@ config DEBUG_TEGRA_UART
bool
depends on ARCH_TEGRA
-config DEBUG_STI_UART
- bool
- depends on ARCH_STI
-
config DEBUG_STM32_UART
bool
depends on ARCH_STM32
@@ -1591,7 +1585,8 @@ config DEBUG_LL_INCLUDE
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
- default "debug/sti.S" if DEBUG_STI_UART
+ default "debug/sti.S" if DEBUG_STIH41X_ASC2
+ default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
default "debug/stm32.S" if DEBUG_STM32_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
@@ -1723,7 +1718,9 @@ config DEBUG_UART_PHYS
default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
+ default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
default 0xfe800000 if ARCH_IOP32X
+ default 0xfed32000 if DEBUG_STIH41X_ASC2
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART0
default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
@@ -1752,7 +1749,8 @@ config DEBUG_UART_PHYS
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART || DEBUG_STM32_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART || \
+ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1817,7 +1815,9 @@ config DEBUG_UART_VIRT
default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+ default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
default 0xfd883000 if DEBUG_ALPINE_UART0
+ default 0xfdd32000 if DEBUG_STIH41X_ASC2
default 0xfe010000 if STM32MP1_DEBUG_UART
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
@@ -1863,7 +1863,8 @@ config DEBUG_UART_VIRT
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
- DEBUG_AT91_UART || DEBUG_STM32_UART
+ DEBUG_AT91_UART || DEBUG_STM32_UART || \
+ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S
index 6b42c91f217d..a903a60b81c6 100644
--- a/arch/arm/include/debug/sti.S
+++ b/arch/arm/include/debug/sti.S
@@ -6,28 +6,6 @@
* Copyright (C) 2013 STMicroelectronics (R&D) Limited.
*/
-#define STIH41X_COMMS_BASE 0xfed00000
-#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
-
-#define STIH41X_SBC_LPM_BASE 0xfe400000
-#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
-#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
-
-
-#define VIRT_ADDRESS(x) (x - 0x1000000)
-
-#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
-#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE
-#endif
-
-#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
-#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE
-#endif
-
-#ifndef DEBUG_LL_UART_BASE
-#error "DEBUG UART is not Configured"
-#endif
-
#define ASC_TX_BUF_OFF 0x04
#define ASC_CTRL_OFF 0x0c
#define ASC_STA_OFF 0x14
@@ -37,8 +15,8 @@
.macro addruart, rp, rv, tmp
- ldr \rp, =DEBUG_LL_UART_BASE @ physical base
- ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virt base
.endm
.macro senduart,rd,rx
--
2.17.1
Powered by blists - more mailing lists