lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200831044043.1561074-4-jckuo@nvidia.com>
Date:   Mon, 31 Aug 2020 12:40:34 +0800
From:   JC Kuo <jckuo@...dia.com>
To:     <gregkh@...uxfoundation.org>, <thierry.reding@...il.com>,
        <robh@...nel.org>, <jonathanh@...dia.com>, <kishon@...com>
CC:     <linux-tegra@...r.kernel.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <nkristam@...dia.com>, JC Kuo <jckuo@...dia.com>
Subject: [PATCH v2 03/12] phy: tegra: xusb: t210: rearrange UPHY init

This commit is a preparation for enabling XUSB SC7 support.
It rearranges Tegra210 XUSB PADCTL UPHY initialization sequence,
for the following reasons:

1. PLLE hardware power sequencer has to be enabled only after both
   PEX UPHY PLL and SATA UPHY PLL are initialized.
   tegra210_uphy_init() -> tegra210_pex_uphy_enable()
                        -> tegra210_sata_uphy_enable()
                        -> tegra210_plle_hw_sequence_start()
                        -> tegra210_aux_mux_lp0_clamp_disable()

2. Once UPHY PLL hardware power sequencer is enabled, do not assert
   reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be
   broken.
   reset_control_assert(pcie->rst) and reset_control_assert(sata->rst)
   are removed from PEX/SATA UPHY disable procedure.

3. At cold boot and SC7 exit, the following bits must be cleared after
   PEX/SATA lanes are out of IDDQ (IDDQ_DISABLE=1).
   a. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN,
   b. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY
   c. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN

   tegra210_pex_uphy_enable() and tegra210_sata_uphy_enable() are in
   charge of bringing lanes out of IDDQ, and then AUX_MUX_LP0_* bits
   will be cleared by tegra210_aux_mux_lp0_clamp_disable().

4. The programming sequence in tegra210_usb3_port_enable() is required
   for both cold boot and SC7 exit, and must be performed only after
   PEX/SATA UPHY is initialized. Therefore, this commit moves the
   programming sequence to .power_on() stub which is invoked after
   .init(). PEX/SATA UPHY is initialzied in .init().

Signed-off-by: JC Kuo <jckuo@...dia.com>
---
 drivers/phy/tegra/xusb-tegra210.c | 495 ++++++++++++++++--------------
 drivers/phy/tegra/xusb.c          |   2 +-
 drivers/phy/tegra/xusb.h          |   6 +-
 3 files changed, 270 insertions(+), 233 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 66bd4613835b..3a2d9797fb9f 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -256,23 +256,52 @@ to_tegra210_xusb_padctl(struct tegra_xusb_padctl *padctl)
 	return container_of(padctl, struct tegra210_xusb_padctl, base);
 }
 
+static const struct tegra_xusb_lane_map tegra210_usb3_map[] = {
+	{ 0, "pcie", 6 },
+	{ 1, "pcie", 5 },
+	{ 2, "pcie", 0 },
+	{ 2, "pcie", 3 },
+	{ 3, "pcie", 4 },
+	{ 3, "pcie", 4 },
+	{ 0, NULL,   0 }
+};
+
+static int tegra210_usb3_lane_map(struct tegra_xusb_lane *lane)
+{
+	const struct tegra_xusb_lane_map *map;
+
+	for (map = tegra210_usb3_map; map->type; map++) {
+		if (map->index == lane->index &&
+		    strcmp(map->type, lane->pad->soc->name) == 0) {
+			dev_dbg(lane->pad->padctl->dev,
+				"lane = %s map to port = usb3-%d\n",
+				lane->pad->soc->lanes[lane->index].name,
+				map->port);
+			return map->port;
+		}
+	}
+
+	return -EINVAL;
+}
+
 /* must be called under padctl->lock */
 static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
 	unsigned long timeout;
 	u32 value;
-	int err;
+	int err, i;
 
-	if (pcie->enable > 0) {
-		pcie->enable++;
+	if (pcie->enable)
 		return 0;
-	}
 
 	err = clk_prepare_enable(pcie->pll);
 	if (err < 0)
 		return err;
 
+	if (tegra210_plle_hw_sequence_is_enabled())
+		goto skip_pll_init;
+
 	err = reset_control_deassert(pcie->rst);
 	if (err < 0)
 		goto disable;
@@ -455,7 +484,14 @@ static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 
 	tegra210_xusb_pll_hw_sequence_start();
 
-	pcie->enable++;
+skip_pll_init:
+	pcie->enable = true;
+
+	for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	return 0;
 
@@ -469,34 +505,42 @@ static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
+	u32 value;
+	int i;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(pcie->enable == 0))
-		goto unlock;
+	if (WARN_ON(!pcie->enable))
+		return;
 
-	if (--pcie->enable > 0)
-		goto unlock;
+	pcie->enable = false;
 
-	reset_control_assert(pcie->rst);
+	for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 	clk_disable_unprepare(pcie->pll);
-
-unlock:
-	mutex_unlock(&padctl->lock);
 }
 
 /* must be called under padctl->lock */
-static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
+static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
+	struct tegra_xusb_lane *lane = tegra_xusb_find_lane(padctl, "sata", 0);
 	unsigned long timeout;
 	u32 value;
-	int err;
+	int err, i;
+	bool usb;
 
-	if (sata->enable > 0) {
-		sata->enable++;
+	if (sata->enable)
 		return 0;
-	}
+
+	if (!lane)
+		return 0;
+
+	if (tegra210_plle_hw_sequence_is_enabled())
+		goto skip_pll_init;
+
+	usb = tegra_xusb_lane_check(lane, "usb3-ss");
 
 	err = clk_prepare_enable(sata->pll);
 	if (err < 0)
@@ -697,7 +741,14 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
 
 	tegra210_sata_pll_hw_sequence_start();
 
-	sata->enable++;
+skip_pll_init:
+	sata->enable = true;
+
+	for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	return 0;
 
@@ -711,31 +762,26 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
 static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
+	u32 value;
+	int i;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(sata->enable == 0))
-		goto unlock;
+	if (WARN_ON(!sata->enable))
+		return;
 
-	if (--sata->enable > 0)
-		goto unlock;
+	sata->enable = false;
 
-	reset_control_assert(sata->rst);
+	for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 	clk_disable_unprepare(sata->pll);
-
-unlock:
-	mutex_unlock(&padctl->lock);
 }
 
-static int tegra210_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+static void tegra210_aux_mux_lp0_clamp_disable(struct tegra_xusb_padctl *padctl)
 {
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (padctl->enable++ > 0)
-		goto out;
-
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
@@ -751,24 +797,12 @@ static int tegra210_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-out:
-	mutex_unlock(&padctl->lock);
-	return 0;
 }
 
-static int tegra210_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+static void tegra210_aux_mux_lp0_clamp_enable(struct tegra_xusb_padctl *padctl)
 {
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(padctl->enable == 0))
-		goto out;
-
-	if (--padctl->enable > 0)
-		goto out;
-
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
@@ -784,12 +818,36 @@ static int tegra210_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+}
+
+static int tegra210_uphy_init(struct tegra_xusb_padctl *padctl)
+{
+	if (padctl->pcie)
+		tegra210_pex_uphy_enable(padctl);
+	if (padctl->sata)
+		tegra210_sata_uphy_enable(padctl);
+
+	if (!tegra210_plle_hw_sequence_is_enabled())
+		tegra210_plle_hw_sequence_start();
+	else
+		dev_dbg(padctl->dev, "PLLE is already in HW control\n");
+
+	tegra210_aux_mux_lp0_clamp_disable(padctl);
 
-out:
-	mutex_unlock(&padctl->lock);
 	return 0;
 }
 
+static void __maybe_unused
+tegra210_uphy_deinit(struct tegra_xusb_padctl *padctl)
+{
+	tegra210_aux_mux_lp0_clamp_enable(padctl);
+
+	if (padctl->pcie)
+		tegra210_pex_uphy_disable(padctl);
+	if (padctl->sata)
+		tegra210_sata_uphy_disable(padctl);
+}
+
 static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
 				  unsigned int index, bool idle)
 {
@@ -926,14 +984,12 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
-	return tegra210_xusb_padctl_enable(padctl);
+	return 0;
 }
 
 static int tegra210_usb2_phy_exit(struct phy *phy)
 {
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	return 0;
 }
 
 static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
@@ -1391,14 +1447,12 @@ static int tegra210_hsic_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
-	return tegra210_xusb_padctl_enable(padctl);
+	return 0;
 }
 
 static int tegra210_hsic_phy_exit(struct phy *phy)
 {
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	return 0;
 }
 
 static int tegra210_hsic_phy_power_on(struct phy *phy)
@@ -1599,6 +1653,128 @@ static const struct tegra_xusb_lane_soc tegra210_pcie_lanes[] = {
 	TEGRA210_LANE("pcie-6", 0x028, 24, 0x3, pcie),
 };
 
+static struct tegra_xusb_usb3_port *
+tegra210_lane_to_usb3_port(struct tegra_xusb_lane *lane)
+{
+	int port;
+
+	if (!lane || !lane->pad || !lane->pad->padctl)
+		return NULL;
+
+	port = tegra210_usb3_lane_map(lane);
+	if (port < 0)
+		return NULL;
+
+	return tegra_xusb_find_usb3_port(lane->pad->padctl, port);
+}
+
+static int tegra210_usb3_phy_power_on(struct phy *phy)
+{
+	struct device *dev = &phy->dev;
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb3_port *usb3 = tegra210_lane_to_usb3_port(lane);
+	unsigned int index;
+	u32 value;
+
+	if (!usb3) {
+		dev_err(dev, "no USB3 port found for lane %u\n", lane->index);
+		return -ENODEV;
+	}
+
+	index = usb3->base.index;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+
+	if (!usb3->internal)
+		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
+	else
+		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
+
+	value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
+	value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, usb3->port);
+	padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
+	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK <<
+		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT);
+	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL <<
+		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
+	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK <<
+		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT);
+	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL <<
+		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
+
+	padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL,
+		      XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
+	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK <<
+		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT);
+	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL <<
+		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT;
+	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
+
+	padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL,
+		      XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	return 0;
+}
+
+static int tegra210_usb3_phy_power_off(struct phy *phy)
+{
+	struct device *dev = &phy->dev;
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb3_port *usb3 = tegra210_lane_to_usb3_port(lane);
+	unsigned int index;
+	u32 value;
+
+	if (!usb3) {
+		dev_err(dev, "no USB3 port found for lane %u\n", lane->index);
+		return -ENODEV;
+	}
+
+	index = usb3->base.index;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(250, 350);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	return 0;
+}
 static struct tegra_xusb_lane *
 tegra210_pcie_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
 			 unsigned int index)
@@ -1640,35 +1816,28 @@ static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
 static int tegra210_pcie_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 
-	return tegra210_xusb_padctl_enable(lane->pad->padctl);
-}
+	mutex_lock(&padctl->lock);
 
-static int tegra210_pcie_phy_exit(struct phy *phy)
-{
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	tegra210_uphy_init(padctl);
 
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	mutex_unlock(&padctl->lock);
+
+	return 0;
 }
 
 static int tegra210_pcie_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
-	int err;
+	int err = 0;
 
 	mutex_lock(&padctl->lock);
 
-	err = tegra210_pex_uphy_enable(padctl);
-	if (err < 0)
-		goto unlock;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	if (tegra_xusb_lane_check(lane, "usb3-ss"))
+		err = tegra210_usb3_phy_power_on(phy);
 
-unlock:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -1677,20 +1846,19 @@ static int tegra210_pcie_phy_power_off(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
+	int err = 0;
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	mutex_lock(&padctl->lock);
 
-	tegra210_pex_uphy_disable(padctl);
+	if (tegra_xusb_lane_check(lane, "usb3-ss"))
+		err = tegra210_usb3_phy_power_off(phy);
 
-	return 0;
+	mutex_unlock(&padctl->lock);
+	return err;
 }
 
 static const struct phy_ops tegra210_pcie_phy_ops = {
 	.init = tegra210_pcie_phy_init,
-	.exit = tegra210_pcie_phy_exit,
 	.power_on = tegra210_pcie_phy_power_on,
 	.power_off = tegra210_pcie_phy_power_off,
 	.owner = THIS_MODULE,
@@ -1811,35 +1979,27 @@ static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
 static int tegra210_sata_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 
-	return tegra210_xusb_padctl_enable(lane->pad->padctl);
-}
+	mutex_lock(&padctl->lock);
 
-static int tegra210_sata_phy_exit(struct phy *phy)
-{
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	tegra210_uphy_init(padctl);
 
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	mutex_unlock(&padctl->lock);
+	return 0;
 }
 
 static int tegra210_sata_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
-	int err;
+	int err = 0;
 
 	mutex_lock(&padctl->lock);
 
-	err = tegra210_sata_uphy_enable(padctl, false);
-	if (err < 0)
-		goto unlock;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	if (tegra_xusb_lane_check(lane, "usb3-ss"))
+		err = tegra210_usb3_phy_power_on(phy);
 
-unlock:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -1848,20 +2008,19 @@ static int tegra210_sata_phy_power_off(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
+	int err = 0;
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	mutex_lock(&padctl->lock);
 
-	tegra210_sata_uphy_disable(lane->pad->padctl);
+	if (tegra_xusb_lane_check(lane, "usb3-ss"))
+		err = tegra210_usb3_phy_power_off(phy);
 
-	return 0;
+	mutex_unlock(&padctl->lock);
+	return err;
 }
 
 static const struct phy_ops tegra210_sata_phy_ops = {
 	.init = tegra210_sata_phy_init,
-	.exit = tegra210_sata_phy_exit,
 	.power_on = tegra210_sata_phy_power_on,
 	.power_off = tegra210_sata_phy_power_off,
 	.owner = THIS_MODULE,
@@ -1984,137 +2143,13 @@ static const struct tegra_xusb_port_ops tegra210_hsic_port_ops = {
 
 static int tegra210_usb3_port_enable(struct tegra_xusb_port *port)
 {
-	struct tegra_xusb_usb3_port *usb3 = to_usb3_port(port);
-	struct tegra_xusb_padctl *padctl = port->padctl;
-	struct tegra_xusb_lane *lane = usb3->base.lane;
-	unsigned int index = port->index;
-	u32 value;
-	int err;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
-
-	if (!usb3->internal)
-		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
-	else
-		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_INTERNAL(index);
-
-	value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
-	value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, usb3->port);
-	padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
-
-	/*
-	 * TODO: move this code into the PCIe/SATA PHY ->power_on() callbacks
-	 * and conditionalize based on mux function? This seems to work, but
-	 * might not be the exact proper sequence.
-	 */
-	err = regulator_enable(usb3->supply);
-	if (err < 0)
-		return err;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
-	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_MASK <<
-		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT);
-	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_VAL <<
-		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL1_TX_TERM_CTRL_SHIFT;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL1(index));
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
-	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_MASK <<
-		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT);
-	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_VAL <<
-		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL2_RX_CTLE_SHIFT;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL2(index));
-
-	padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL3_RX_DFE_VAL,
-		      XUSB_PADCTL_UPHY_USB3_PADX_ECTL3(index));
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
-	value &= ~(XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_MASK <<
-		   XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT);
-	value |= XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_VAL <<
-		 XUSB_PADCTL_UPHY_USB3_PAD_ECTL4_RX_CDR_CTRL_SHIFT;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_USB3_PADX_ECTL4(index));
-
-	padctl_writel(padctl, XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL,
-		      XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(index));
-
-	if (lane->pad == padctl->sata)
-		err = tegra210_sata_uphy_enable(padctl, true);
-	else
-		err = tegra210_pex_uphy_enable(padctl);
-
-	if (err) {
-		dev_err(&port->dev, "%s: failed to enable UPHY: %d\n",
-			__func__, err);
-		return err;
-	}
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-	usleep_range(100, 200);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-	usleep_range(100, 200);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
 	return 0;
 }
 
 static void tegra210_usb3_port_disable(struct tegra_xusb_port *port)
 {
-	struct tegra_xusb_usb3_port *usb3 = to_usb3_port(port);
-	struct tegra_xusb_padctl *padctl = port->padctl;
-	struct tegra_xusb_lane *lane = port->lane;
-	unsigned int index = port->index;
-	u32 value;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-	usleep_range(100, 200);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-	usleep_range(250, 350);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
-	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(index);
-	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-	if (lane->pad == padctl->sata)
-		tegra210_sata_uphy_disable(padctl);
-	else
-		tegra210_pex_uphy_disable(padctl);
-
-	regulator_disable(usb3->supply);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
-	value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(index);
-	value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(index, 0x7);
-	padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
 }
 
-static const struct tegra_xusb_lane_map tegra210_usb3_map[] = {
-	{ 0, "pcie", 6 },
-	{ 1, "pcie", 5 },
-	{ 2, "pcie", 0 },
-	{ 2, "pcie", 3 },
-	{ 3, "pcie", 4 },
-	{ 3, "pcie", 4 },
-	{ 0, NULL,   0 }
-};
-
 static struct tegra_xusb_lane *
 tegra210_usb3_port_map(struct tegra_xusb_port *port)
 {
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index de4a46fe1763..b48b590aa0c1 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -376,7 +376,7 @@ static int tegra_xusb_setup_pads(struct tegra_xusb_padctl *padctl)
 	return 0;
 }
 
-static bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane,
+bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane,
 				  const char *function)
 {
 	const char *func = lane->soc->funcs[lane->function];
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index ea35af747066..0c828694cf2d 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -128,6 +128,8 @@ struct tegra_xusb_lane_ops {
 	void (*remove)(struct tegra_xusb_lane *lane);
 };
 
+bool tegra_xusb_lane_check(struct tegra_xusb_lane *lane, const char *function);
+
 /*
  * pads
  */
@@ -230,7 +232,7 @@ struct tegra_xusb_pcie_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_pcie_pad *
@@ -245,7 +247,7 @@ struct tegra_xusb_sata_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_sata_pad *
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ