lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 1 Sep 2020 17:09:07 +0200 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, Zhi Chen <zhichen@...eaurora.org>, Kalle Valo <kvalo@...eaurora.org>, Sasha Levin <sashal@...nel.org> Subject: [PATCH 5.4 067/214] Revert "ath10k: fix DMA related firmware crashes on multiple devices" From: Zhi Chen <zhichen@...eaurora.org> [ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen <zhichen@...eaurora.org> Signed-off-by: Kalle Valo <kvalo@...eaurora.org> Signed-off-by: Sasha Levin <sashal@...nel.org> --- drivers/net/wireless/ath/ath10k/hw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 2ae57c1de7b55..ae4c9edc445c3 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -810,7 +810,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define TARGET_10_4_TX_DBG_LOG_SIZE 1024 #define TARGET_10_4_NUM_WDS_ENTRIES 32 -#define TARGET_10_4_DMA_BURST_SIZE 0 +#define TARGET_10_4_DMA_BURST_SIZE 1 #define TARGET_10_4_MAC_AGGR_DELIM 0 #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0 -- 2.25.1
Powered by blists - more mailing lists