[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200901150927.514317187@linuxfoundation.org>
Date: Tue, 1 Sep 2020 17:10:31 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Alim Akhtar <alim.akhtar@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Tamseel Shams <m.shams@...sung.com>
Subject: [PATCH 4.9 55/78] serial: samsung: Removes the IRQ not found warning
From: Tamseel Shams <m.shams@...sung.com>
commit 8c6c378b0cbe0c9f1390986b5f8ffb5f6ff7593b upstream.
In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following false-positive error:
"IRQ index 1 not found" on newer SoC's.
This patch adds the condition to check for Tx interrupt
only for the those SoC's which have 2 interrupt lines.
Tested-by: Alim Akhtar <alim.akhtar@...sung.com>
Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>
Signed-off-by: Tamseel Shams <m.shams@...sung.com>
Cc: stable <stable@...r.kernel.org>
Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/tty/serial/samsung.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1725,9 +1725,11 @@ static int s3c24xx_serial_init_port(stru
ourport->tx_irq = ret + 1;
}
- ret = platform_get_irq(platdev, 1);
- if (ret > 0)
- ourport->tx_irq = ret;
+ if (!s3c24xx_serial_has_interrupt_mask(port)) {
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
+ }
/*
* DMA is currently supported only on DT platforms, if DMA properties
* are specified.
Powered by blists - more mailing lists