[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200902230215.3452712-3-swboyd@chromium.org>
Date: Wed, 2 Sep 2020 16:02:07 -0700
From: Stephen Boyd <swboyd@...omium.org>
To: Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Jeykumar Sankaran <jsanka@...eaurora.org>,
Chandan Uddaraju <chandanu@...eaurora.org>,
Vara Reddy <varar@...eaurora.org>,
Tanmay Shah <tanmay@...eaurora.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Manu Gautam <mgautam@...eaurora.org>,
Sandeep Maheswaram <sanm@...eaurora.org>,
Douglas Anderson <dianders@...omium.org>,
Sean Paul <seanpaul@...omium.org>,
Jonathan Marek <jonathan@...ek.ca>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Rob Clark <robdclark@...omium.org>
Subject: [PATCH v2 02/10] phy: qcom-qmp: Move phy mode into struct qmp_phy
The phy mode pertains to the phy itself, i.e. 'struct qmp_phy', not the
wrapper, i.e. 'struct qcom_qmp'. Move the phy mode into the phy
structure to more accurately reflect what is going on. This also cleans
up 'struct qcom_qmp' so that it can eventually be the place where qmp
wrapper wide data is located, paving the way for the USB3+DP combo phy.
Cc: Jeykumar Sankaran <jsanka@...eaurora.org>
Cc: Chandan Uddaraju <chandanu@...eaurora.org>
Cc: Vara Reddy <varar@...eaurora.org>
Cc: Tanmay Shah <tanmay@...eaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Manu Gautam <mgautam@...eaurora.org>
Cc: Sandeep Maheswaram <sanm@...eaurora.org>
Cc: Douglas Anderson <dianders@...omium.org>
Cc: Sean Paul <seanpaul@...omium.org>
Cc: Jonathan Marek <jonathan@...ek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Rob Clark <robdclark@...omium.org>
Signed-off-by: Stephen Boyd <swboyd@...omium.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 562053ce9455..7ee9e966dc6d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1812,6 +1812,7 @@ struct qmp_phy_cfg {
* @index: lane index
* @qmp: QMP phy to which this lane belongs
* @lane_rst: lane's reset controller
+ * @mode: current PHY mode
*/
struct qmp_phy {
struct phy *phy;
@@ -1825,6 +1826,7 @@ struct qmp_phy {
unsigned int index;
struct qcom_qmp *qmp;
struct reset_control *lane_rst;
+ enum phy_mode mode;
};
/**
@@ -1843,7 +1845,6 @@ struct qmp_phy {
* @phy_mutex: mutex lock for PHY common block initialization
* @init_count: phy common block initialization count
* @phy_initialized: indicate if PHY has been initialized
- * @mode: current PHY mode
* @ufs_reset: optional UFS PHY reset handle
*/
struct qcom_qmp {
@@ -1861,7 +1862,6 @@ struct qcom_qmp {
struct mutex phy_mutex;
int init_count;
bool phy_initialized;
- enum phy_mode mode;
struct reset_control *ufs_reset;
};
@@ -2801,9 +2801,8 @@ static int qcom_qmp_phy_set_mode(struct phy *phy,
enum phy_mode mode, int submode)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
- qmp->mode = mode;
+ qphy->mode = mode;
return 0;
}
@@ -2816,8 +2815,8 @@ static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
void __iomem *pcs_misc = qphy->pcs_misc;
u32 intr_mask;
- if (qmp->mode == PHY_MODE_USB_HOST_SS ||
- qmp->mode == PHY_MODE_USB_DEVICE_SS)
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
else
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
@@ -2863,7 +2862,7 @@ static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
struct qmp_phy *qphy = qmp->phys[0];
const struct qmp_phy_cfg *cfg = qmp->cfg;
- dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
/* Supported only for USB3 PHY */
if (cfg->type != PHY_TYPE_USB3)
@@ -2889,7 +2888,7 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
const struct qmp_phy_cfg *cfg = qmp->cfg;
int ret = 0;
- dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
/* Supported only for USB3 PHY */
if (cfg->type != PHY_TYPE_USB3)
--
Sent by a computer, using git, on the internet
Powered by blists - more mailing lists