linux-kernel - Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJZ5v0jFceTFRTD55cz3ZHRZpuNRK_z9=_DxWexc8ArsGU3cog@mail.gmail.com>
Date:   Wed, 2 Sep 2020 17:57:01 +0200
From:   "Rafael J. Wysocki" <rafael@...nel.org>
To:     Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc:     linux-i2c <linux-i2c@...r.kernel.org>,
        Wolfram Sang <wsa@...-dreams.de>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "Mani, Rajmohan" <rajmohan.mani@...el.com>,
        Tomasz Figa <tfiga@...omium.org>,
        Bartosz Golaszewski <bgolaszewski@...libre.com>,
        Bingbu Cao <bingbu.cao@...el.com>,
        Chiranjeevi Rapolu <chiranjeevi.rapolu@...el.com>,
        Hyungwoo Yang <hyungwoo.yang@...el.com>,
        linux-media@...r.kernel.org
Subject: Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe
 _DSD property

On Tue, Sep 1, 2020 at 11:03 PM Sakari Ailus
<sakari.ailus@...ux.intel.com> wrote:
>
> Document the probe-low-power _DSD property and how it is used with I²C
> drivers.

I would reorder the series to make this go right after the [1/6] or
maybe even fold it into that patch.

The point is that the changes in [1/6] clearly depend on the property
defined here.

> Signed-off-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
> ---
>  .../acpi/dsd/allow-low-power-probe.rst        | 28 +++++++++++++++++++
>  Documentation/firmware-guide/acpi/index.rst   |  1 +
>  2 files changed, 29 insertions(+)
>  create mode 100644 Documentation/firmware-guide/acpi/dsd/allow-low-power-probe.rst
>
> diff --git a/Documentation/firmware-guide/acpi/dsd/allow-low-power-probe.rst b/Documentation/firmware-guide/acpi/dsd/allow-low-power-probe.rst
> new file mode 100644
> index 0000000000000..6fcc89162b898
> --- /dev/null
> +++ b/Documentation/firmware-guide/acpi/dsd/allow-low-power-probe.rst
> @@ -0,0 +1,28 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +Probing I²C devices in low power state
> +======================================
> +
> +Introduction
> +============
> +
> +In some cases it may be preferred to leave certain devices powered off for the
> +entire system bootup if powering on these devices has adverse side effects,
> +beyond just powering on the said device. Linux recognizes the _DSD property
> +"allow-low-power-probe" that can be used for this purpose.

It would be good to refer to the document defining the generic _DSD
properties mechanism and the GUID used for that from here.

The meaning of  "_DSD property" may not be entirely clear to the
reader as it stands.

And maybe call the property "i2c-allow-low-power-probe" or similar, to
indicate that it is specific to i2c.

> +
> +How it works
> +============
> +
> +The property "allow-low-power-probe" boolean property may be used to tell Linux

"boolean device property" ?

> +that the I²C framework should instruct the kernel ACPI framework to leave the
> +device in the low power state. If the driver indicates its support for this by
> +setting the I2C_DRV_FL_ALLOW_LOW_POWER_PROBE flag in struct i2c_driver.flags
> +field and the "allow-low-power-probe" property is present, the device will not
> +be powered on for probe.
> +
> +The downside is that as the device is not powered on, even if there's a problem
> +with the device, the driver likely probes just fine but the first user will
> +find out the device doesn't work, instead of a failure at probe time. This
> +feature should thus be used sparingly.

It would be good to give an ASL example with this property provided.

> diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
> index ad3b5afdae77e..0070fcde9e669 100644
> --- a/Documentation/firmware-guide/acpi/index.rst
> +++ b/Documentation/firmware-guide/acpi/index.rst
> @@ -11,6 +11,7 @@ ACPI Support
>     dsd/graph
>     dsd/data-node-references
>     dsd/leds
> +   dsd/allow-low-power-probe
>     enumeration
>     osi
>     method-customizing
> --