| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200901150556.19432-11-yung-chuan.liao@linux.intel.com>
Date: Tue, 1 Sep 2020 23:05:56 +0800
From: Bard Liao <yung-chuan.liao@...ux.intel.com>
To: alsa-devel@...a-project.org, vkoul@...nel.org
Cc: vinod.koul@...aro.org, linux-kernel@...r.kernel.org, tiwai@...e.de,
broonie@...nel.org, gregkh@...uxfoundation.org, jank@...ence.com,
srinivas.kandagatla@...aro.org, rander.wang@...ux.intel.com,
ranjani.sridharan@...ux.intel.com, hui.wang@...onical.com,
pierre-louis.bossart@...ux.intel.com, sanyog.r.kale@...el.com,
mengdong.lin@...el.com, bard.liao@...el.com
Subject: [PATCH v2 10/10] soundwire: intel: don't manage link power individually
From: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Each link has separate power controls, but experimental results show
we need to use an all-or-none approach to the link power management.
This change has marginal power impacts, the DSP needs to be powered
anyways before SoundWire links can be powered, and even when powered a
link can be in clock-stopped mode.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@...ux.intel.com>
---
drivers/soundwire/intel.c | 70 +++++++++++++++++++++++++--------------
1 file changed, 46 insertions(+), 24 deletions(-)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 97c8cfc54ddd..710f5eba936b 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -63,7 +63,9 @@ MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off
#define SDW_SHIM_WAKESTS 0x192
#define SDW_SHIM_LCTL_SPA BIT(0)
+#define SDW_SHIM_LCTL_SPA_MASK GENMASK(3, 0)
#define SDW_SHIM_LCTL_CPA BIT(8)
+#define SDW_SHIM_LCTL_CPA_MASK GENMASK(11, 8)
#define SDW_SHIM_SYNC_SYNCPRD_VAL_24 (24000 / SDW_CADENCE_GSYNC_KHZ - 1)
#define SDW_SHIM_SYNC_SYNCPRD_VAL_38_4 (38400 / SDW_CADENCE_GSYNC_KHZ - 1)
@@ -295,8 +297,8 @@ static int intel_link_power_up(struct sdw_intel *sdw)
u32 *shim_mask = sdw->link_res->shim_mask;
struct sdw_bus *bus = &sdw->cdns.bus;
struct sdw_master_prop *prop = &bus->prop;
- int spa_mask, cpa_mask;
- int link_control;
+ u32 spa_mask, cpa_mask;
+ u32 link_control;
int ret = 0;
u32 syncprd;
u32 sync_reg;
@@ -319,6 +321,8 @@ static int intel_link_power_up(struct sdw_intel *sdw)
syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_24;
if (!*shim_mask) {
+ dev_dbg(sdw->cdns.dev, "%s: powering up all links\n", __func__);
+
/* we first need to program the SyncPRD/CPU registers */
dev_dbg(sdw->cdns.dev,
"%s: first link up, programming SYNCPRD\n", __func__);
@@ -331,21 +335,24 @@ static int intel_link_power_up(struct sdw_intel *sdw)
/* Set SyncCPU bit */
sync_reg |= SDW_SHIM_SYNC_SYNCCPU;
intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
- }
- /* Link power up sequence */
- link_control = intel_readl(shim, SDW_SHIM_LCTL);
- spa_mask = (SDW_SHIM_LCTL_SPA << link_id);
- cpa_mask = (SDW_SHIM_LCTL_CPA << link_id);
- link_control |= spa_mask;
+ /* Link power up sequence */
+ link_control = intel_readl(shim, SDW_SHIM_LCTL);
- ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
- if (ret < 0) {
- dev_err(sdw->cdns.dev, "Failed to power up link: %d\n", ret);
- goto out;
- }
+ /* only power-up enabled links */
+ spa_mask = sdw->link_res->link_mask <<
+ SDW_REG_SHIFT(SDW_SHIM_LCTL_SPA_MASK);
+ cpa_mask = sdw->link_res->link_mask <<
+ SDW_REG_SHIFT(SDW_SHIM_LCTL_CPA_MASK);
+
+ link_control |= spa_mask;
+
+ ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev, "Failed to power up link: %d\n", ret);
+ goto out;
+ }
- if (!*shim_mask) {
/* SyncCPU will change once link is active */
ret = intel_wait_bit(shim, SDW_SHIM_SYNC,
SDW_SHIM_SYNC_SYNCCPU, 0);
@@ -483,7 +490,7 @@ static void intel_shim_wake(struct sdw_intel *sdw, bool wake_enable)
static int intel_link_power_down(struct sdw_intel *sdw)
{
- int link_control, spa_mask, cpa_mask;
+ u32 link_control, spa_mask, cpa_mask;
unsigned int link_id = sdw->instance;
void __iomem *shim = sdw->link_res->shim;
u32 *shim_mask = sdw->link_res->shim_mask;
@@ -493,24 +500,39 @@ static int intel_link_power_down(struct sdw_intel *sdw)
intel_shim_master_ip_to_glue(sdw);
- /* Link power down sequence */
- link_control = intel_readl(shim, SDW_SHIM_LCTL);
- spa_mask = ~(SDW_SHIM_LCTL_SPA << link_id);
- cpa_mask = (SDW_SHIM_LCTL_CPA << link_id);
- link_control &= spa_mask;
-
- ret = intel_clear_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
-
if (!(*shim_mask & BIT(link_id)))
dev_err(sdw->cdns.dev,
"%s: Unbalanced power-up/down calls\n", __func__);
*shim_mask &= ~BIT(link_id);
+ if (!*shim_mask) {
+
+ dev_dbg(sdw->cdns.dev, "%s: powering down all links\n", __func__);
+
+ /* Link power down sequence */
+ link_control = intel_readl(shim, SDW_SHIM_LCTL);
+
+ /* only power-down enabled links */
+ spa_mask = (~sdw->link_res->link_mask) <<
+ SDW_REG_SHIFT(SDW_SHIM_LCTL_SPA_MASK);
+ cpa_mask = sdw->link_res->link_mask <<
+ SDW_REG_SHIFT(SDW_SHIM_LCTL_CPA_MASK);
+
+ link_control &= spa_mask;
+
+ ret = intel_clear_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
+ }
+
+ link_control = intel_readl(shim, SDW_SHIM_LCTL);
+
mutex_unlock(sdw->link_res->shim_lock);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev, "%s: could not power down link\n", __func__);
+
return ret;
+ }
sdw->cdns.link_up = false;
return 0;
--
2.17.1
Powered by blists - more mailing lists