[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech>
Date: Thu, 3 Sep 2020 10:01:43 +0200
From: Maxime Ripard <maxime@...no.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Eric Anholt <eric@...olt.net>
Cc: dri-devel@...ts.freedesktop.org,
linux-rpi-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
Tim Gover <tim.gover@...pberrypi.com>,
Phil Elwell <phil@...pberrypi.com>,
Maxime Ripard <maxime@...no.tech>,
Chanwoo Choi <cw00.choi@...sung.com>,
Hoegeun Kwon <hoegeun.kwon@...sung.com>,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH v5 71/80] drm/vc4: hdmi: Always recenter the HDMI FIFO
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to
recenter the FIFO every time we're doing a modeset and not only if we're
connected to an HDMI monitor.
Reviewed-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
Tested-by: Chanwoo Choi <cw00.choi@...sung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
Tested-by: Stefan Wahren <stefan.wahren@...e.com>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 46 +++++++++++++++++++----------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 3c7862a1dda8..c9eae5352b9a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -425,6 +425,30 @@ static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
(hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));
}
+static void vc4_hdmi_recenter_fifo(struct vc4_hdmi *vc4_hdmi)
+{
+ u32 drift;
+ int ret;
+
+ drift = HDMI_READ(HDMI_FIFO_CTL);
+ drift &= VC4_HDMI_FIFO_VALID_WRITE_MASK;
+
+ HDMI_WRITE(HDMI_FIFO_CTL,
+ drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
+ HDMI_WRITE(HDMI_FIFO_CTL,
+ drift | VC4_HDMI_FIFO_CTL_RECENTER);
+ usleep_range(1000, 1100);
+ HDMI_WRITE(HDMI_FIFO_CTL,
+ drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
+ HDMI_WRITE(HDMI_FIFO_CTL,
+ drift | VC4_HDMI_FIFO_CTL_RECENTER);
+
+ ret = wait_for(HDMI_READ(HDMI_FIFO_CTL) &
+ VC4_HDMI_FIFO_CTL_RECENTER_DONE, 1);
+ WARN_ONCE(ret, "Timeout waiting for "
+ "VC4_HDMI_FIFO_CTL_RECENTER_DONE");
+}
+
static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
@@ -543,8 +567,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
}
if (vc4_encoder->hdmi_monitor) {
- u32 drift;
-
WARN_ON(!(HDMI_READ(HDMI_SCHEDULER_CONTROL) &
VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE));
HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
@@ -555,25 +577,9 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
VC4_HDMI_RAM_PACKET_ENABLE);
vc4_hdmi_set_infoframes(encoder);
-
- drift = HDMI_READ(HDMI_FIFO_CTL);
- drift &= VC4_HDMI_FIFO_VALID_WRITE_MASK;
-
- HDMI_WRITE(HDMI_FIFO_CTL,
- drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
- HDMI_WRITE(HDMI_FIFO_CTL,
- drift | VC4_HDMI_FIFO_CTL_RECENTER);
- usleep_range(1000, 1100);
- HDMI_WRITE(HDMI_FIFO_CTL,
- drift & ~VC4_HDMI_FIFO_CTL_RECENTER);
- HDMI_WRITE(HDMI_FIFO_CTL,
- drift | VC4_HDMI_FIFO_CTL_RECENTER);
-
- ret = wait_for(HDMI_READ(HDMI_FIFO_CTL) &
- VC4_HDMI_FIFO_CTL_RECENTER_DONE, 1);
- WARN_ONCE(ret, "Timeout waiting for "
- "VC4_HDMI_FIFO_CTL_RECENTER_DONE");
}
+
+ vc4_hdmi_recenter_fifo(vc4_hdmi);
}
static enum drm_mode_status
--
git-series 0.9.1
Powered by blists - more mailing lists