[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech>
Date: Thu, 3 Sep 2020 10:00:57 +0200
From: Maxime Ripard <maxime@...no.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Eric Anholt <eric@...olt.net>
Cc: dri-devel@...ts.freedesktop.org,
linux-rpi-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
Tim Gover <tim.gover@...pberrypi.com>,
Phil Elwell <phil@...pberrypi.com>,
Maxime Ripard <maxime@...no.tech>,
Chanwoo Choi <cw00.choi@...sung.com>,
Hoegeun Kwon <hoegeun.kwon@...sung.com>,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH v5 25/80] drm/vc4: crtc: Remove mode_set_nofb
On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the
pixelvalve needs to be setup each time there's a mode change or enable /
disable sequence.
Therefore, we can't really use mode_set_nofb anymore to configure it, but
we need to move it to atomic_enable.
Reviewed-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
Tested-by: Chanwoo Choi <cw00.choi@...sung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
Tested-by: Stefan Wahren <stefan.wahren@...e.com>
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 284a85b9d7d4..2eda2e6429ec 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -376,11 +376,6 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
}
}
-static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
-{
- vc4_crtc_config_pv(crtc);
-}
-
static void require_hvs_enabled(struct drm_device *dev)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
@@ -433,6 +428,7 @@ static void vc4_crtc_atomic_enable(struct drm_crtc *crtc,
require_hvs_enabled(dev);
vc4_crtc_pixelvalve_reset(crtc);
+ vc4_crtc_config_pv(crtc);
CRTC_WRITE(PV_CONTROL, CRTC_READ(PV_CONTROL) | PV_CONTROL_EN);
@@ -791,7 +787,6 @@ static const struct drm_crtc_funcs vc4_crtc_funcs = {
};
static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
- .mode_set_nofb = vc4_crtc_mode_set_nofb,
.mode_valid = vc4_crtc_mode_valid,
.atomic_check = vc4_crtc_atomic_check,
.atomic_flush = vc4_hvs_atomic_flush,
--
git-series 0.9.1
Powered by blists - more mailing lists