[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200903081550.6012-3-sakari.ailus@linux.intel.com>
Date: Thu, 3 Sep 2020 11:15:46 +0300
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: linux-i2c@...r.kernel.org
Cc: Wolfram Sang <wsa@...-dreams.de>,
"Rafael J. Wysocki" <rafael@...nel.org>,
linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
rajmohan.mani@...el.com, Tomasz Figa <tfiga@...omium.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Bingbu Cao <bingbu.cao@...el.com>,
Chiranjeevi Rapolu <chiranjeevi.rapolu@...el.com>,
Hyungwoo Yang <hyungwoo.yang@...el.com>,
linux-media@...r.kernel.org
Subject: [PATCH v8 2/6] Documentation: ACPI: Document i2c-allow-low-power-probe _DSD property
Document the probe-low-power _DSD property and how it is used with I²C
drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
---
.../acpi/dsd/i2c-allow-low-power-probe.rst | 60 +++++++++++++++++++
Documentation/firmware-guide/acpi/index.rst | 1 +
2 files changed, 61 insertions(+)
create mode 100644 Documentation/firmware-guide/acpi/dsd/i2c-allow-low-power-probe.rst
diff --git a/Documentation/firmware-guide/acpi/dsd/i2c-allow-low-power-probe.rst b/Documentation/firmware-guide/acpi/dsd/i2c-allow-low-power-probe.rst
new file mode 100644
index 0000000000000..7e7ed3ad3ac69
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/i2c-allow-low-power-probe.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Probing I²C devices in low power state
+======================================
+
+Introduction
+============
+
+In some cases it may be preferred to leave certain devices powered off for the
+entire system bootup if powering on these devices has adverse side effects,
+beyond just powering on the said device. Linux recognizes the _DSD property [1]
+"i2c-allow-low-power-probe" that can be used for this purpose.
+
+How it works
+============
+
+The boolean device property "i2c-allow-low-power-probe" may be used to tell
+Linux that the I²C framework should instruct the kernel ACPI framework to leave
+the device in the low power state. If the driver indicates its support for this
+by setting the I2C_DRV_FL_ALLOW_LOW_POWER_PROBE flag in struct i2c_driver.flags
+field and the "i2c-allow-low-power-probe" property is present, the device will
+not be powered on for probe.
+
+The downside is that as the device is not powered on, even if there's a problem
+with the device, the driver likely probes just fine but the first user will
+find out the device doesn't work, instead of a failure at probe time. This
+feature should thus be used sparingly.
+
+Example
+=======
+
+An ASL example describing an ACPI device using this property looks like
+this. Some objects not relevant from the example point of view have been
+omitted.
+
+ Device (CAM0)
+ {
+ Name (_HID, "SONY319A")
+ Name (_UID, Zero)
+ Name (_CRS, ResourceTemplate ()
+ {
+ I2cSerialBus(0x0020, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C0",
+ 0x00, ResourceConsumer)
+ })
+ Name (PRT4, Package() {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "i2c-allow-low-power-probe", 1 },
+ }
+ })
+ }
+
+References
+==========
+
+[1] Device Properties UUID For _DSD.
+ https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
+ referenced 2020-09-02.
diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
index ad3b5afdae77e..1f87b7072d1e6 100644
--- a/Documentation/firmware-guide/acpi/index.rst
+++ b/Documentation/firmware-guide/acpi/index.rst
@@ -11,6 +11,7 @@ ACPI Support
dsd/graph
dsd/data-node-references
dsd/leds
+ dsd/i2c-allow-low-power-probe
enumeration
osi
method-customizing
--
2.20.1
Powered by blists - more mailing lists