[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200903015048.3091523-3-paul@crapouillou.net>
Date: Thu, 3 Sep 2020 03:50:46 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>
Cc: od@...c.me, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 3/5] clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
CLK_SET_RATE_GATE means that the clock must be gated when being
reclocked. This is not the case for the PLLs in Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
drivers/clk/ingenic/cgu.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 6bb5dedf0252..521a40dfcb72 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -182,6 +182,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
unsigned long rate, flags;
unsigned int m, n, od;
+ int ret = 0;
u32 ctl;
rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
@@ -203,9 +204,14 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
writel(ctl, cgu->base + pll_info->reg);
+
+ /* If the PLL is enabled, verify that it's stable */
+ if (ctl & BIT(pll_info->enable_bit))
+ ret = ingenic_pll_check_stable(cgu, pll_info);
+
spin_unlock_irqrestore(&cgu->lock, flags);
- return 0;
+ return ret;
}
static int ingenic_pll_enable(struct clk_hw *hw)
@@ -662,7 +668,6 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
}
} else if (caps & CGU_CLK_PLL) {
clk_init.ops = &ingenic_pll_ops;
- clk_init.flags |= CLK_SET_RATE_GATE;
caps &= ~CGU_CLK_PLL;
--
2.28.0
Powered by blists - more mailing lists