linux-kernel - [PATCH 0/7] Add support for the iEi Puzzle-M801 board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sat,  5 Sep 2020 15:03:29 +0200
From:   Luka Kovacic <luka.kovacic@...tura.hr>
To:     linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-leds@...r.kernel.org
Cc:     lee.jones@...aro.org, pavel@....cz, dmurphy@...com,
        robh+dt@...nel.org, jdelvare@...e.com, linux@...ck-us.net,
        andrew@...n.ch, jason@...edaemon.net, gregory.clement@...tlin.com,
        luka.perkov@...tura.hr, Luka Kovacic <luka.kovacic@...tura.hr>
Subject: [PATCH 0/7] Add support for the iEi Puzzle-M801 board

This patchset adds support for the iEi Puzzle-M801 1U Rackmount Network
Appliance and for the iEi WT61P803 PUZZLE microcontroller, which enables
some board specific features like fan and LED control, system power
management and temperature sensor reading.

The platform is based on the popular Marvell Armada 8040 SoC and supports
up to 16 GB of DDR4 2400 MHz ECC RAM.
It has a PCIe x16 slot (x2 lanes only) and an M.2 type B slot.

External chassis ports:
2x 10 GbE SFP+
4x 1 GbE (Marvell 88E1512P)
2x USB 3.0
1x RJ45 serial port

All notable board components are supported in this patchset.

Luka Kovacic (7):
  dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver
    bindings
  drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU
  drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
  drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
  Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface
    documentation
  MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver
  arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board

 .../stable/sysfs-driver-iei-wt61p803-puzzle   |   65 +
 .../hwmon/iei,wt61p803-puzzle-hwmon.yaml      |   41 +
 .../leds/iei,wt61p803-puzzle-leds.yaml        |   48 +
 .../bindings/mfd/iei,wt61p803-puzzle.yaml     |   82 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 MAINTAINERS                                   |   13 +
 arch/arm64/boot/dts/marvell/Makefile          |    1 +
 .../dts/marvell/armada-8040-puzzle-m801.dts   |  519 +++++++
 drivers/hwmon/Kconfig                         |    8 +
 drivers/hwmon/Makefile                        |    1 +
 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c     |  613 ++++++++
 drivers/leds/Kconfig                          |    8 +
 drivers/leds/Makefile                         |    1 +
 drivers/leds/leds-iei-wt61p803-puzzle.c       |  184 +++
 drivers/mfd/Kconfig                           |    8 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/iei-wt61p803-puzzle.c             | 1242 +++++++++++++++++
 include/linux/mfd/iei-wt61p803-puzzle.h       |   27 +
 18 files changed, 2864 insertions(+)
 create mode 100644 Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
 create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
 create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
 create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
 create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
 create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
 create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h

-- 
2.20.1