linux-kernel - Re: [PATCH] arm64: dts: sdm845: Fixup OPP table for all qup devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 7 Sep 2020 13:37:07 -0700
From:   John Stultz <john.stultz@...aro.org>
To:     Rajendra Nayak <rnayak@...eaurora.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, lkml <linux-kernel@...r.kernel.org>,
        Amit Pundir <amit.pundir@...aro.org>, tdas@...eaurora.org
Subject: Re: [PATCH] arm64: dts: sdm845: Fixup OPP table for all qup devices

On Mon, Aug 31, 2020 at 9:04 PM John Stultz <john.stultz@...aro.org> wrote:
> On Wed, Aug 12, 2020 at 3:23 AM Rajendra Nayak <rnayak@...eaurora.org> wrote:
> > This OPP table was based on the clock VDD-FMAX tables seen in
> > downstream code, however it turns out the downstream clock
> > driver does update these tables based on later/production
> > rev of the chip and whats seen in the tables belongs to an
> > early engineering rev of the SoC.
> > Fix up the OPP tables such that it now matches with the
> > production rev of sdm845 SoC.
> >
> > Fixes: 13cadb34e593 ("arm64: dts: sdm845: Add OPP table for all qup
> > devices")
> > Reported-by: John Stultz <john.stultz@...aro.org>
> > Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
> > ---
>
> Just wanted to follow up on this, as it's still missing from 5.9-rc3
> and is needed to fix a bluetooth regression on db845c from 5.9-rc1.
>
> Amit has already validated it (on PocoF1 as well), but just in case its useful:
> Tested-by: John Stultz <john.stultz@...aro.org>

Hey Everyone,
  Just wanted to nag folks on this again as it is still missing from
upstream and resolves a bluetooth regression from 5.9-rc1.

thanks
-john