[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20200907031724.3512099-3-f.fainelli@gmail.com>
Date: Sun, 6 Sep 2020 20:17:24 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM BCM7XXX ARM
ARCHITECTURE),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/2] bus: brcmstb_gisb: Add support for breakpoint interrupts
GISB breakpoint interrupts can be raised when a breakpoint has been
enabled to match a specific master and/or GISB register address. Being
able to print a message, similar to those done during target abort or
timeout greatly helps debug systems.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/bus/brcmstb_gisb.c | 96 +++++++++++++++++++++++++++++++++++++-
1 file changed, 95 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 7579439971e3..7355fa2cb439 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,8 +30,22 @@
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
+#define ARB_BP_CAP_CLEAR (1 << 0)
+#define ARB_BP_CAP_STATUS_PROT_SHIFT 14
+#define ARB_BP_CAP_STATUS_TYPE (1 << 13)
+#define ARB_BP_CAP_STATUS_RSP_SHIFT 10
+#define ARB_BP_CAP_STATUS_MASK GENMASK(1, 0)
+#define ARB_BP_CAP_STATUS_BS_SHIFT 2
+#define ARB_BP_CAP_STATUS_WRITE (1 << 1)
+#define ARB_BP_CAP_STATUS_VALID (1 << 0)
+
enum {
ARB_TIMER,
+ ARB_BP_CAP_CLR,
+ ARB_BP_CAP_HI_ADDR,
+ ARB_BP_CAP_ADDR,
+ ARB_BP_CAP_STATUS,
+ ARB_BP_CAP_MASTER,
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
@@ -41,6 +55,11 @@ enum {
static const int gisb_offsets_bcm7038[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x0b8,
+ [ARB_BP_CAP_STATUS] = 0x0c0,
+ [ARB_BP_CAP_MASTER] = -1,
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
@@ -50,6 +69,11 @@ static const int gisb_offsets_bcm7038[] = {
static const int gisb_offsets_bcm7278[] = {
[ARB_TIMER] = 0x008,
+ [ARB_BP_CAP_CLR] = 0x01c,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x220,
+ [ARB_BP_CAP_STATUS] = 0x230,
+ [ARB_BP_CAP_MASTER] = 0x234,
[ARB_ERR_CAP_CLR] = 0x7f8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x7e0,
@@ -59,6 +83,11 @@ static const int gisb_offsets_bcm7278[] = {
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x0b8,
+ [ARB_BP_CAP_STATUS] = 0x0c0,
+ [ARB_BP_CAP_MASTER] = 0x0c4,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
@@ -68,6 +97,11 @@ static const int gisb_offsets_bcm7400[] = {
static const int gisb_offsets_bcm7435[] = {
[ARB_TIMER] = 0x00c,
+ [ARB_BP_CAP_CLR] = 0x014,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x158,
+ [ARB_BP_CAP_STATUS] = 0x160,
+ [ARB_BP_CAP_MASTER] = 0x164,
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
@@ -77,6 +111,11 @@ static const int gisb_offsets_bcm7435[] = {
static const int gisb_offsets_bcm7445[] = {
[ARB_TIMER] = 0x008,
+ [ARB_BP_CAP_CLR] = 0x010,
+ [ARB_BP_CAP_HI_ADDR] = -1,
+ [ARB_BP_CAP_ADDR] = 0x1d8,
+ [ARB_BP_CAP_STATUS] = 0x1e0,
+ [ARB_BP_CAP_MASTER] = 0x1e4,
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
@@ -125,6 +164,16 @@ static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
return value;
}
+static u64 gisb_read_bp_address(struct brcmstb_gisb_arb_device *gdev)
+{
+ u64 value;
+
+ value = gisb_read(gdev, ARB_BP_CAP_ADDR);
+ value |= (u64)gisb_read(gdev, ARB_BP_CAP_HI_ADDR) << 32;
+
+ return value;
+}
+
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
@@ -259,6 +308,41 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t brcmstb_gisb_bp_handler(int irq, void *dev_id)
+{
+ struct brcmstb_gisb_arb_device *gdev = dev_id;
+ const char *m_name;
+ u32 bp_status;
+ u64 arb_addr;
+ u32 master;
+ char m_fmt[11];
+
+ bp_status = gisb_read(gdev, ARB_BP_CAP_STATUS);
+
+ /* Invalid captured address, bail out */
+ if (!(bp_status & ARB_BP_CAP_STATUS_VALID))
+ return IRQ_HANDLED;
+
+ /* Read the address and master */
+ arb_addr = gisb_read_bp_address(gdev);
+ master = gisb_read(gdev, ARB_BP_CAP_MASTER);
+
+ m_name = brcmstb_gisb_master_to_str(gdev, master);
+ if (!m_name) {
+ snprintf(m_fmt, sizeof(m_fmt), "0x%08x", master);
+ m_name = m_fmt;
+ }
+
+ pr_crit("GISB: breakpoint at 0x%llx [%c], core: %s\n",
+ arb_addr, bp_status & ARB_BP_CAP_STATUS_WRITE ? 'W' : 'R',
+ m_name);
+
+ /* clear the GISB error */
+ gisb_write(gdev, ARB_ERR_CAP_CLEAR, ARB_ERR_CAP_CLR);
+
+ return IRQ_HANDLED;
+}
+
/*
* Dump out gisb errors on die or panic.
*/
@@ -317,13 +401,14 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
struct brcmstb_gisb_arb_device *gdev;
const struct of_device_id *of_id;
struct resource *r;
- int err, timeout_irq, tea_irq;
+ int err, timeout_irq, tea_irq, bp_irq;
unsigned int num_masters, j = 0;
int i, first, last;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
timeout_irq = platform_get_irq(pdev, 0);
tea_irq = platform_get_irq(pdev, 1);
+ bp_irq = platform_get_irq(pdev, 2);
gdev = devm_kzalloc(&pdev->dev, sizeof(*gdev), GFP_KERNEL);
if (!gdev)
@@ -356,6 +441,15 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
if (err < 0)
return err;
+ /* Interrupt is optional */
+ if (bp_irq > 0) {
+ err = devm_request_irq(&pdev->dev, bp_irq,
+ brcmstb_gisb_bp_handler, 0, pdev->name,
+ gdev);
+ if (err < 0)
+ return err;
+ }
+
/* If we do not have a valid mask, assume all masters are enabled */
if (of_property_read_u32(dn, "brcm,gisb-arb-master-mask",
&gdev->valid_mask))
--
2.25.1
Powered by blists - more mailing lists