Message-Id: <20200907100039.1731457-4-cychiang@chromium.org>
Date:   Mon,  7 Sep 2020 18:00:39 +0800
From:   Cheng-Yi Chiang <cychiang@...omium.org>
To:     linux-kernel@...r.kernel.org
Cc:     Mark Brown <broonie@...nel.org>, Taniya Das <tdas@...eaurora.org>,
        Rohit kumar <rohitkr@...eaurora.org>,
        Banajit Goswami <bgoswami@...eaurora.org>,
        Patrick Lai <plai@...eaurora.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>,
        Srini Kandagatla <srinivas.kandagatla@...aro.org>,
        Stephan Gerhold <stephan@...hold.net>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Heiko Stuebner <heiko@...ech.de>, dianders@...omium.org,
        dgreid@...omium.org, tzungbi@...omium.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        alsa-devel@...a-project.org, linux-mediatek@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org,
        Ajit Pandey <ajitp@...eaurora.org>,
        Cheng-Yi Chiang <cychiang@...omium.org>,
        Tzung-Bi Shih <tzungbi@...gle.com>
Subject: [PATCH v7 3/3] ASoC: qcom: sc7180: Add machine driver for sound card registration

From: Ajit Pandey <ajitp@...eaurora.org>

Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.

Signed-off-by: Ajit Pandey <ajitp@...eaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@...gle.com>
---
 sound/soc/qcom/Kconfig  |  12 ++
 sound/soc/qcom/Makefile |   2 +
 sound/soc/qcom/sc7180.c | 288 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 302 insertions(+)
 create mode 100644 sound/soc/qcom/sc7180.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index a607ace8b089..0459185ee243 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -116,4 +116,16 @@ config SND_SOC_SDM845
 	  SDM845 SoC-based systems.
 	  Say Y if you want to use audio device on this SoCs.
 
+config SND_SOC_SC7180
+	tristate "SoC Machine driver for SC7180 boards"
+	depends on I2C
+	select SND_SOC_QCOM_COMMON
+	select SND_SOC_LPASS_SC7180
+	select SND_SOC_MAX98357A
+	select SND_SOC_RT5682_I2C
+	help
+	  To add support for audio on Qualcomm Technologies Inc.
+	  SC7180 SoC-based systems.
+	  Say Y if you want to use audio device on this SoCs.
+
 endif #SND_SOC_QCOM
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 7972c9479ab0..0cdcbf367ef1 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o
 snd-soc-apq8016-sbc-objs := apq8016_sbc.o
 snd-soc-apq8096-objs := apq8096.o
 snd-soc-sdm845-objs := sdm845.o
+snd-soc-sc7180-objs := sc7180.o
 snd-soc-qcom-common-objs := common.o
 
 obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
 obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
 obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
 obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
+obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
 obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
 
 #DSP lib
diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
new file mode 100644
index 000000000000..175a2f36842c
--- /dev/null
+++ b/sound/soc/qcom/sc7180.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+//
+// sc7180.c -- ALSA SoC Machine driver for SC7180
+
+#include <dt-bindings/sound/sc7180-lpass.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <uapi/linux/input-event-codes.h>
+
+#include "../codecs/rt5682.h"
+#include "common.h"
+#include "lpass.h"
+
+#define DEFAULT_SAMPLE_RATE_48K		48000
+#define DEFAULT_MCLK_RATE		19200000
+#define RT5682_PLL1_FREQ (48000 * 512)
+
+struct sc7180_snd_data {
+	u32 pri_mi2s_clk_count;
+	struct snd_soc_jack hs_jack;
+	struct device_node *hs_jack_of_node;
+	struct snd_soc_jack hdmi_jack;
+	struct device_node *hdmi_jack_of_node;
+};
+
+static void sc7180_jack_free(struct snd_jack *jack)
+{
+	struct snd_soc_component *component = jack->private_data;
+
+	snd_soc_component_set_jack(component, NULL, NULL);
+}
+
+static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
+	struct snd_jack *jack;
+	int rval;
+
+	rval = snd_soc_card_jack_new(
+			card, "Headset Jack",
+			SND_JACK_HEADSET |
+			SND_JACK_HEADPHONE |
+			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+			SND_JACK_BTN_2 | SND_JACK_BTN_3,
+			&pdata->hs_jack, NULL, 0);
+
+	if (rval < 0) {
+		dev_err(card->dev, "Unable to add Headset Jack\n");
+		return rval;
+	}
+
+	jack = pdata->hs_jack.jack;
+
+	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	jack->private_data = component;
+	jack->private_free = sc7180_jack_free;
+
+	return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
+}
+
+static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_component *component = codec_dai->component;
+	struct snd_jack *jack;
+	int rval;
+
+	rval = snd_soc_card_jack_new(
+			card, "HDMI Jack",
+			SND_JACK_LINEOUT,
+			&pdata->hdmi_jack, NULL, 0);
+
+	if (rval < 0) {
+		dev_err(card->dev, "Unable to add HDMI Jack\n");
+		return rval;
+	}
+
+	jack = pdata->hdmi_jack.jack;
+	jack->private_data = component;
+	jack->private_free = sc7180_jack_free;
+
+	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
+}
+
+static int sc7180_snd_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	switch (cpu_dai->id) {
+	case MI2S_PRIMARY:
+		if (++data->pri_mi2s_clk_count == 1) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+					       LPASS_MCLK0,
+					       DEFAULT_MCLK_RATE,
+					       SNDRV_PCM_STREAM_PLAYBACK);
+		}
+
+		snd_soc_dai_set_fmt(codec_dai,
+				    SND_SOC_DAIFMT_CBS_CFS |
+				    SND_SOC_DAIFMT_NB_NF |
+				    SND_SOC_DAIFMT_I2S);
+
+		/* Configure PLL1 for codec */
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
+					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
+		if (ret) {
+			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+			return ret;
+		}
+
+		/* Configure sysclk for codec */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
+					     RT5682_PLL1_FREQ,
+					     SND_SOC_CLOCK_IN);
+		if (ret)
+			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
+				ret);
+
+		break;
+	case MI2S_SECONDARY:
+		break;
+	case HDMI:
+		break;
+	default:
+		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+			cpu_dai->id);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+	switch (cpu_dai->id) {
+	case MI2S_PRIMARY:
+		if (--data->pri_mi2s_clk_count == 0) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+					       LPASS_MCLK0,
+					       0,
+					       SNDRV_PCM_STREAM_PLAYBACK);
+		}
+		break;
+	case MI2S_SECONDARY:
+		break;
+	case HDMI:
+		break;
+	default:
+		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+			cpu_dai->id);
+		break;
+	}
+}
+
+static const struct snd_soc_ops sc7180_ops = {
+	.startup = sc7180_snd_startup,
+	.shutdown = sc7180_snd_shutdown,
+};
+
+static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static struct snd_soc_card sc7180_card = {
+	.owner = THIS_MODULE,
+	.dapm_widgets = sc7180_snd_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
+};
+
+static int sc7180_parse_headset_jack_of(struct sc7180_snd_data *data, struct device *dev)
+{
+	data->hs_jack_of_node = of_parse_phandle(dev->of_node, "headset-jack", 0);
+	if (!data->hs_jack_of_node)
+		return -EINVAL;
+	return 0;
+}
+
+static int sc7180_parse_hdmi_jack_of(struct sc7180_snd_data *data, struct device *dev)
+{
+	data->hdmi_jack_of_node = of_parse_phandle(
+			dev->of_node, "hdmi-jack", 0);
+	if (!data->hdmi_jack_of_node)
+		return -EINVAL;
+	return 0;
+}
+
+static void sc7180_add_ops(struct snd_soc_card *card)
+{
+	struct snd_soc_dai_link *link;
+	int i;
+	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+
+	for_each_card_prelinks(card, i, link) {
+		link->ops = &sc7180_ops;
+		if (link->codecs &&
+		    link->codecs->of_node == pdata->hs_jack_of_node) {
+			link->init = sc7180_headset_init;
+		}
+		if (link->codecs &&
+		    link->codecs->of_node == pdata->hdmi_jack_of_node) {
+			link->init = sc7180_hdmi_init;
+		}
+	}
+}
+
+static int sc7180_snd_platform_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &sc7180_card;
+	struct sc7180_snd_data *data;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	/* Allocate the private data */
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	card->dev = dev;
+
+	ret = qcom_snd_parse_of(card);
+	if (ret) {
+		dev_err(dev, "Error parsing OF data\n");
+		return ret;
+	}
+
+	snd_soc_card_set_drvdata(card, data);
+
+	ret = sc7180_parse_headset_jack_of(data, dev);
+	if (ret) {
+		dev_err(dev, "Failed to parse OF for headset jack device\n");
+		return ret;
+	}
+
+	ret = sc7180_parse_hdmi_jack_of(data, dev);
+	if (ret) {
+		dev_err(dev, "Failed to parse OF for hdmi jack device\n");
+		return ret;
+	}
+
+	sc7180_add_ops(card);
+
+	return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id sc7180_snd_device_id[]  = {
+	{ .compatible = "qcom,sc7180-sndcard" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
+
+static struct platform_driver sc7180_snd_driver = {
+	.probe = sc7180_snd_platform_probe,
+	.driver = {
+		.name = "msm-snd-sc7180",
+		.of_match_table = sc7180_snd_device_id,
+	},
+};
+module_platform_driver(sc7180_snd_driver);
+
+MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.28.0.526.ge36021eeef-goog

Powered by blists - more mailing lists