linux-kernel - Re: [PATCH V2 2/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 7 Sep 2020 12:53:27 +0000
From:   rojay@...eaurora.org
To:     Akash Asthana <akashast@...eaurora.org>
Cc:     wsa@...nel.org, swboyd@...omium.org, dianders@...omium.org,
        saiprakash.ranjan@...eaurora.org, gregkh@...uxfoundation.org,
        mka@...omium.org, msavaliy@....qualcomm.com, skakit@...eaurora.org,
        rnayak@...eaurora.org, agross@...nel.org,
        bjorn.andersson@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
        sumit.semwal@...aro.org, linux-media@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org
Subject: Re: [PATCH V2 2/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c

On 2020-08-26 17:26, Akash Asthana wrote:
> Hi Roja,
> 
> On 8/20/2020 4:05 PM, Roja Rani Yarubandi wrote:
>> If the hardware is still accessing memory after SMMU translation
>> is disabled (as part of smmu shutdown callback), then the
>> IOVAs (I/O virtual address) which it was using will go on the bus
>> as the physical addresses which will result in unknown crashes
>> like NoC/interconnect errors.
>> 
>> So, implement shutdown callback to i2c driver to unmap DMA mappings
>> during system "reboot" or "shutdown".
>> 
>> Signed-off-by: Roja Rani Yarubandi <rojay@...eaurora.org>
>> ---
>> Changes in V2:
>>   - As per Stephen's comments added seperate function for stop 
>> transfer,
>>     fixed minor nitpicks.
>> 
>>   drivers/i2c/busses/i2c-qcom-geni.c | 43 
>> ++++++++++++++++++++++++++++++
>>   include/linux/qcom-geni-se.h       |  5 ++++
>>   2 files changed, 48 insertions(+)
>> 
>> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c 
>> b/drivers/i2c/busses/i2c-qcom-geni.c
>> index 1fda5c7c2cfc..d07f2f33bb75 100644
>> --- a/drivers/i2c/busses/i2c-qcom-geni.c
>> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
>> @@ -486,6 +486,28 @@ static int geni_i2c_xfer(struct i2c_adapter 
>> *adap,
>>   	return ret;
>>   }
>>   +static void geni_i2c_stop_xfer(struct geni_i2c_dev *gi2c)
>> +{
>> +	u32 val;
>> +	struct geni_se *se = &gi2c->se;
>> +
>> +	val = readl_relaxed(gi2c->se.base + SE_DMA_DEBUG_REG0);
>> +	if (val & DMA_TX_ACTIVE) {
>> +		geni_i2c_abort_xfer(gi2c);
>> +		gi2c->cur_wr = 0;
>> +		if (gi2c->err)
>> +			geni_i2c_tx_fsm_rst(gi2c);
>> +		geni_se_tx_dma_unprep(se, gi2c->tx_dma, gi2c->xfer_len);
>> +	}
> should be 'else if', because TX and RX can't happen parallel.
>> +	if (val & DMA_RX_ACTIVE) {
>> +		geni_i2c_abort_xfer(gi2c);
>> +		gi2c->cur_rd = 0;
>> +		if (gi2c->err)
>> +			geni_i2c_rx_fsm_rst(gi2c);
>> +		geni_se_rx_dma_unprep(se, gi2c->rx_dma, gi2c->xfer_len);
>> +	}
>> +}
>> +
>>   static u32 geni_i2c_func(struct i2c_adapter *adap)
>>   {
>>   	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & 
>> ~I2C_FUNC_SMBUS_QUICK);
>> @@ -617,6 +639,26 @@ static int geni_i2c_remove(struct platform_device 
>> *pdev)
>>   	return 0;
>>   }
>>   +static void geni_i2c_shutdown(struct platform_device *pdev)
>> +{
>> +	int ret;
>> +	u32 dma;
>> +	struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
>> +	struct geni_se *se = &gi2c->se;
>> +
>> +	ret = pm_runtime_get_sync(gi2c->se.dev);
>> +	if (ret < 0) {
>> +		dev_err(gi2c->se.dev, "Failed to resume device: %d\n", ret);
>> +		return;
>> +	}
>> +
>> +	dma = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
> 
> Wrt to current issue context it may be suffice to stop just DMA mode
> transfers but why not stop all mode of active transfer during shutdown
> in a generic way.
> 
> Regards,
> 
> Akash
> 

Okay, I will include FIFO transfer case also in stop_xfer

>> +	if (dma)
>> +		geni_i2c_stop_xfer(gi2c);
>> +
>> +	pm_runtime_put_sync_suspend(gi2c->se.dev);
>> +}
>> +
>>   static int __maybe_unused geni_i2c_runtime_suspend(struct device 
>> *dev)
>>   {
>>   	int ret;
>> @@ -677,6 +719,7 @@ MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
>>   static struct platform_driver geni_i2c_driver = {
>>   	.probe  = geni_i2c_probe,
>>   	.remove = geni_i2c_remove,
>> +	.shutdown = geni_i2c_shutdown,
>>   	.driver = {
>>   		.name = "geni_i2c",
>>   		.pm = &geni_i2c_pm_ops,
>> diff --git a/include/linux/qcom-geni-se.h 
>> b/include/linux/qcom-geni-se.h
>> index dd464943f717..c3c016496d98 100644
>> --- a/include/linux/qcom-geni-se.h
>> +++ b/include/linux/qcom-geni-se.h
>> @@ -77,6 +77,7 @@ struct geni_se {
>>   #define SE_DMA_RX_FSM_RST		0xd58
>>   #define SE_HW_PARAM_0			0xe24
>>   #define SE_HW_PARAM_1			0xe28
>> +#define SE_DMA_DEBUG_REG0		0xe40
>>     /* GENI_FORCE_DEFAULT_REG fields */
>>   #define FORCE_DEFAULT	BIT(0)
>> @@ -207,6 +208,10 @@ struct geni_se {
>>   #define RX_GENI_CANCEL_IRQ		BIT(11)
>>   #define RX_GENI_GP_IRQ_EXT		GENMASK(13, 12)
>>   +/* SE_DMA_DEBUG_REG0 Register fields */
>> +#define DMA_TX_ACTIVE			BIT(0)
>> +#define DMA_RX_ACTIVE			BIT(1)
>> +
>>   /* SE_HW_PARAM_0 fields */
>>   #define TX_FIFO_WIDTH_MSK		GENMASK(29, 24)
>>   #define TX_FIFO_WIDTH_SHFT		24