[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200907163500.1281543-13-sashal@kernel.org>
Date: Mon, 7 Sep 2020 12:34:56 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Evgeniy Didin <Evgeniy.Didin@...opsys.com>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
Alexey Brodkin <abrodkin@...opsys.com>,
Vineet Gupta <vgupta@...opsys.com>,
Sasha Levin <sashal@...nel.org>, devicetree@...r.kernel.org,
linux-snps-arc@...ts.infradead.org
Subject: [PATCH AUTOSEL 4.14 13/17] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
From: Evgeniy Didin <Evgeniy.Didin@...opsys.com>
[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]
HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.
Also adding name of PHY placed on HSDK board.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@...opsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Cc: Alexey Brodkin <abrodkin@...opsys.com>
Signed-off-by: Vineet Gupta <vgupta@...opsys.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arc/boot/dts/hsdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index aeacea148793c..75aa3a8f9fdc9 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -163,7 +163,7 @@ ethernet@...0 {
reg = <0x8000 0x2000>;
interrupts = <10>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
@@ -179,7 +179,7 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
--
2.25.1
Powered by blists - more mailing lists