| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200908152250.345605044@linuxfoundation.org>
Date: Tue, 8 Sep 2020 17:25:21 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Jon Hunter <jonathanh@...dia.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Sowjanya Komatineni <skomatineni@...dia.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Subject: [PATCH 5.8 179/186] sdhci: tegra: Add missing TMCLK for data timeout
From: Sowjanya Komatineni <skomatineni@...dia.com>
commit 8048822bac01936fda2c7b924a52131da81e6198 upstream.
commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.
USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.
Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.
So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@...r.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@...dia.com>
Reviewed-by: Jon Hunter <jonathanh@...dia.com>
Acked-by: Adrian Hunter <adrian.hunter@...el.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/mmc/host/sdhci-tegra.c | 53 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 51 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -101,6 +101,12 @@
#define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8)
#define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9)
+/*
+ * NVQUIRK_HAS_TMCLK is for SoC's having separate timeout clock for Tegra
+ * SDMMC hardware data timeout.
+ */
+#define NVQUIRK_HAS_TMCLK BIT(10)
+
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
@@ -131,6 +137,7 @@ struct sdhci_tegra_autocal_offsets {
struct sdhci_tegra {
const struct sdhci_tegra_soc_data *soc_data;
struct gpio_desc *power_gpio;
+ struct clk *tmclk;
bool ddr_signaling;
bool pad_calib_required;
bool pad_control_available;
@@ -1424,7 +1431,8 @@ static const struct sdhci_tegra_soc_data
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
- NVQUIRK_ENABLE_SDR104,
+ NVQUIRK_ENABLE_SDR104 |
+ NVQUIRK_HAS_TMCLK,
.min_tap_delay = 106,
.max_tap_delay = 185,
};
@@ -1462,6 +1470,7 @@ static const struct sdhci_tegra_soc_data
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
NVQUIRK_ENABLE_SDR104 |
+ NVQUIRK_HAS_TMCLK |
NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING,
.min_tap_delay = 84,
.max_tap_delay = 136,
@@ -1474,7 +1483,8 @@ static const struct sdhci_tegra_soc_data
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
NVQUIRK_ENABLE_SDR50 |
- NVQUIRK_ENABLE_SDR104,
+ NVQUIRK_ENABLE_SDR104 |
+ NVQUIRK_HAS_TMCLK,
.min_tap_delay = 96,
.max_tap_delay = 139,
};
@@ -1602,6 +1612,43 @@ static int sdhci_tegra_probe(struct plat
goto err_power_req;
}
+ /*
+ * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host
+ * timeout clock and SW can choose TMCLK or SDCLK for hardware
+ * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of
+ * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL.
+ *
+ * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses
+ * 12Mhz TMCLK which is advertised in host capability register.
+ * With TMCLK of 12Mhz provides maximum data timeout period that can
+ * be achieved is 11s better than using SDCLK for data timeout.
+ *
+ * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's
+ * supporting separate TMCLK.
+ */
+
+ if (soc_data->nvquirks & NVQUIRK_HAS_TMCLK) {
+ clk = devm_clk_get(&pdev->dev, "tmclk");
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_power_req;
+
+ dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc);
+ clk = NULL;
+ }
+
+ clk_set_rate(clk, 12000000);
+ rc = clk_prepare_enable(clk);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "failed to enable tmclk: %d\n", rc);
+ goto err_power_req;
+ }
+
+ tegra_host->tmclk = clk;
+ }
+
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
if (IS_ERR(clk)) {
rc = PTR_ERR(clk);
@@ -1645,6 +1692,7 @@ err_add_host:
err_rst_get:
clk_disable_unprepare(pltfm_host->clk);
err_clk_get:
+ clk_disable_unprepare(tegra_host->tmclk);
err_power_req:
err_parse_dt:
sdhci_pltfm_free(pdev);
@@ -1662,6 +1710,7 @@ static int sdhci_tegra_remove(struct pla
reset_control_assert(tegra_host->rst);
usleep_range(2000, 4000);
clk_disable_unprepare(pltfm_host->clk);
+ clk_disable_unprepare(tegra_host->tmclk);
sdhci_pltfm_free(pdev);
Powered by blists - more mailing lists