| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fd8070dc-8e93-2f66-1c11-d008374d6881@baylibre.com>
Date: Tue, 8 Sep 2020 10:06:03 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: dri-devel@...ts.freedesktop.org, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver
Hi,
On 07/09/2020 20:03, Daniel Vetter wrote:
> On Mon, Sep 07, 2020 at 11:03:29AM +0200, Neil Armstrong wrote:
>> On 07/09/2020 10:44, Daniel Vetter wrote:
>>> On Mon, Sep 07, 2020 at 10:43:51AM +0200, Daniel Vetter wrote:
>>>> On Mon, Sep 07, 2020 at 10:18:25AM +0200, Neil Armstrong wrote:
>>>>> The Amlogic AXg SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom
>>>>> glue managing the IP resets, clock and data input similar to the DW-HDMI Glue on other
>>>>> Amlogic SoCs.
>>>>>
>>>>> This adds support for the Glue managing the transceiver, mimicing the init flow provided
>>>>> by Amlogic to setup the ENCl encoder, the glue, the transceiver, the digital D-PHY and the
>>>>> Analog PHY in the proper way.
>>>>>
>>>>> The DW-MIPI-DSI transceiver + D-PHY are directly clocked by the VCLK2 clock, which pixel clock
>>>>> is derived and feeds the ENCL encoder and the VIU pixel reader.
>>>>>
>>>>> An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
>>>>> DW-MIPI-DSI transceiver.
>>>>>
>>>>> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>>>>
>>>> More dw-hdmi drivers which aren't bridges but components, and the thing is
>>>> still midlayer-y as heck :-/
>>>
>>> *dw-dsi, but really they both work the same way and should both be fixed
>>> ...
>>
>> They are bridges but since they have platform-dependent code due to theirs's generic IP
>> nature, they need to be intanciated by components to sync with the platform code.
>
> Yeah that's how it currently works, but there's not much reason why it
> needs to work like that. That platform glue code can also be put behind
> the drm_bridge abstraction, and we could use the normal dt based bridge
> lookup like for everything else.
>
> Afaiui the only reason dw-* bridge drivers work like that is because for
> historical reasons we only had component.c at first, and none of the more
> fancy dynamic bridge lookup. So would be really good to switch this all
> over to a proper&clean bridge abstraction, and not leak everything around.
Does it mean we should avoit using components, right ?
>
> I've typed up what I think should be the way forward a few times already,
> but thus far not even the todo.rst entry materialized:
>
> https://lore.kernel.org/dri-devel/20200430135841.GE10381@phenom.ffwll.local/
>
> If everyone is always about "not in my patch series" it'll never happen.
Today, the dw-mipi-dsi and dw-mipi-hdmi has mandatory callbacks to implement
vendor specific features, like :
- hdmi/dsi phy handling when mixed into the glue/custom/synopsys but with platform specific values
- platform specific mode validation
- hpd setup => could use laurent's work here with no_connector, but how do we handle rxsense ???
- dsi timings/lane mbps ? these are platform phy specific
For amlogic, I can split the "component" code handling venc/vclk into a primary bridge and add a
secondary driver only handling the glue around dw-mipi-dsi/dw-mipi-hdmi, would that be a good start ?
Neil
>
> Cheers, Daniel
>
>
>>
>> Neil
>>
>>>
>>>>
>>>> Can we try to fix this? There's a ton of this going on, and the more we
>>>> add the old fashioned way the harder this gets to fix up for real.
>>>> -Daniel
>>>>
>>>>> ---
>>>>> drivers/gpu/drm/meson/Kconfig | 7 +
>>>>> drivers/gpu/drm/meson/Makefile | 1 +
>>>>> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 562 ++++++++++++++++++++++
>>>>> 3 files changed, 570 insertions(+)
>>>>> create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>>>>>
>>>>> diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
>>>>> index 9f9281dd49f8..385f6f23839b 100644
>>>>> --- a/drivers/gpu/drm/meson/Kconfig
>>>>> +++ b/drivers/gpu/drm/meson/Kconfig
>>>>> @@ -16,3 +16,10 @@ config DRM_MESON_DW_HDMI
>>>>> default y if DRM_MESON
>>>>> select DRM_DW_HDMI
>>>>> imply DRM_DW_HDMI_I2S_AUDIO
>>>>> +
>>>>> +config DRM_MESON_DW_MIPI_DSI
>>>>> + tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
>>>>> + depends on DRM_MESON
>>>>> + default y if DRM_MESON
>>>>> + select DRM_DW_MIPI_DSI
>>>>> + select GENERIC_PHY_MIPI_DPHY
>>>>> diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
>>>>> index 28a519cdf66b..2cc870e91182 100644
>>>>> --- a/drivers/gpu/drm/meson/Makefile
>>>>> +++ b/drivers/gpu/drm/meson/Makefile
>>>>> @@ -5,3 +5,4 @@ meson-drm-y += meson_rdma.o meson_osd_afbcd.o
>>>>>
>>>>> obj-$(CONFIG_DRM_MESON) += meson-drm.o
>>>>> obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
>>>>> +obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
>>>>> diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>>>>> new file mode 100644
>>>>> index 000000000000..bbe1294fce7c
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
>>>>> @@ -0,0 +1,562 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>>> +/*
>>>>> + * Copyright (C) 2016 BayLibre, SAS
>>>>> + * Author: Neil Armstrong <narmstrong@...libre.com>
>>>>> + * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#include <linux/clk.h>
>>>>> +#include <linux/component.h>
>>>>> +#include <linux/kernel.h>
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/of_device.h>
>>>>> +#include <linux/of_graph.h>
>>>>> +#include <linux/reset.h>
>>>>> +#include <linux/phy/phy.h>
>>>>> +
>>>>> +#include <video/mipi_display.h>
>>>>> +
>>>>> +#include <drm/bridge/dw_mipi_dsi.h>
>>>>> +#include <drm/drm_mipi_dsi.h>
>>>>> +
>>>>> +#include <drm/drm_atomic_helper.h>
>>>>> +#include <drm/drm_device.h>
>>>>> +#include <drm/drm_probe_helper.h>
>>>>> +#include <drm/drm_print.h>
>>>>> +
>>>>> +#include "meson_drv.h"
>>>>> +#include "meson_dw_mipi_dsi.h"
>>>>> +#include "meson_registers.h"
>>>>> +#include "meson_venc.h"
>>>>> +
>>>>> +#define DRIVER_NAME "meson-dw-mipi-dsi"
>>>>> +#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
>>>>> +
>>>>> +/* MIPI DSI/VENC Color Format Definitions */
>>>>> +#define MIPI_DSI_VENC_COLOR_30B 0x0
>>>>> +#define MIPI_DSI_VENC_COLOR_24B 0x1
>>>>> +#define MIPI_DSI_VENC_COLOR_18B 0x2
>>>>> +#define MIPI_DSI_VENC_COLOR_16B 0x3
>>>>> +
>>>>> +#define COLOR_16BIT_CFG_1 0x0
>>>>> +#define COLOR_16BIT_CFG_2 0x1
>>>>> +#define COLOR_16BIT_CFG_3 0x2
>>>>> +#define COLOR_18BIT_CFG_1 0x3
>>>>> +#define COLOR_18BIT_CFG_2 0x4
>>>>> +#define COLOR_24BIT 0x5
>>>>> +#define COLOR_20BIT_LOOSE 0x6
>>>>> +#define COLOR_24_BIT_YCBCR 0x7
>>>>> +#define COLOR_16BIT_YCBCR 0x8
>>>>> +#define COLOR_30BIT 0x9
>>>>> +#define COLOR_36BIT 0xa
>>>>> +#define COLOR_12BIT 0xb
>>>>> +#define COLOR_RGB_111 0xc
>>>>> +#define COLOR_RGB_332 0xd
>>>>> +#define COLOR_RGB_444 0xe
>>>>> +
>>>>> +/* MIPI DSI Relative REGISTERs Definitions */
>>>>> +/* For MIPI_DSI_TOP_CNTL */
>>>>> +#define BIT_DPI_COLOR_MODE 20
>>>>> +#define BIT_IN_COLOR_MODE 16
>>>>> +#define BIT_CHROMA_SUBSAMPLE 14
>>>>> +#define BIT_COMP2_SEL 12
>>>>> +#define BIT_COMP1_SEL 10
>>>>> +#define BIT_COMP0_SEL 8
>>>>> +#define BIT_DE_POL 6
>>>>> +#define BIT_HSYNC_POL 5
>>>>> +#define BIT_VSYNC_POL 4
>>>>> +#define BIT_DPICOLORM 3
>>>>> +#define BIT_DPISHUTDN 2
>>>>> +#define BIT_EDPITE_INTR_PULSE 1
>>>>> +#define BIT_ERR_INTR_PULSE 0
>>>>> +
>>>>> +/* HHI Registers */
>>>>> +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
>>>>> +#define VCLK2_DIV_MASK 0xff
>>>>> +#define VCLK2_DIV_EN BIT(16)
>>>>> +#define VCLK2_DIV_RESET BIT(17)
>>>>> +#define CTS_ENCL_SEL_MASK (0xf << 12)
>>>>> +#define CTS_ENCL_SEL_SHIFT 12
>>>>> +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
>>>>> +#define VCLK2_EN BIT(19)
>>>>> +#define VCLK2_SEL_MASK (0x7 << 16)
>>>>> +#define VCLK2_SEL_SHIFT 16
>>>>> +#define VCLK2_SOFT_RESET BIT(15)
>>>>> +#define VCLK2_DIV1_EN BIT(0)
>>>>> +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
>>>>> +#define CTS_ENCL_EN BIT(3)
>>>>> +
>>>>> +/**
>>>>> + * DOC: MIPI DSI
>>>>> + *
>>>>> + */
>>>>> +
>>>>> +struct meson_dw_mipi_dsi {
>>>>> + struct drm_encoder encoder;
>>>>> + struct meson_drm *priv;
>>>>> + struct device *dev;
>>>>> + void __iomem *base;
>>>>> + struct phy *phy;
>>>>> + union phy_configure_opts phy_opts;
>>>>> + struct dw_mipi_dsi *dmd;
>>>>> + struct dw_mipi_dsi_plat_data pdata;
>>>>> + struct mipi_dsi_device *dsi_device;
>>>>> + unsigned long mode_flags;
>>>>> + struct clk *px_clk;
>>>>> +};
>>>>> +#define encoder_to_meson_dw_mipi_dsi(x) \
>>>>> + container_of(x, struct meson_dw_mipi_dsi, encoder)
>>>>> +
>>>>> +static void dw_mipi_dsi_set_vclk(struct meson_dw_mipi_dsi *mipi_dsi,
>>>>> + struct drm_display_mode *mode)
>>>>> +{
>>>>> + struct meson_drm *priv = mipi_dsi->priv;
>>>>> + unsigned int vclk2_div;
>>>>> + unsigned int pll_rate;
>>>>> + int ret;
>>>>> +
>>>>> + pll_rate = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate;
>>>>> + vclk2_div = pll_rate / (mode->clock * 1000);
>>>>> +
>>>>> + ret = clk_set_rate(mipi_dsi->px_clk, pll_rate);
>>>>> + if (ret) {
>>>>> + pr_err("Failed to set DSI PLL rate %lu\n",
>>>>> + mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
>>>>> +
>>>>> + return;
>>>>> + }
>>>>> +
>>>>> + /* Disable VCLK2 */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, 0);
>>>>> +
>>>>> + /* Setup the VCLK2 divider value */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
>>>>> + VCLK2_DIV_MASK, (vclk2_div - 1));
>>>>> +
>>>>> + /* select gp0 for vclk2 */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
>>>>> + VCLK2_SEL_MASK, (0 << VCLK2_SEL_SHIFT));
>>>>> +
>>>>> + /* enable vclk2 gate */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, VCLK2_EN);
>>>>> +
>>>>> + /* select vclk2_div1 for encl */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
>>>>> + CTS_ENCL_SEL_MASK, (8 << CTS_ENCL_SEL_SHIFT));
>>>>> +
>>>>> + /* release vclk2_div_reset and enable vclk2_div */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
>>>>> + VCLK2_DIV_EN | VCLK2_DIV_RESET, VCLK2_DIV_EN);
>>>>> +
>>>>> + /* enable vclk2_div1 gate */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
>>>>> + VCLK2_DIV1_EN, VCLK2_DIV1_EN);
>>>>> +
>>>>> + /* reset vclk2 */
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
>>>>> + VCLK2_SOFT_RESET, VCLK2_SOFT_RESET);
>>>>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
>>>>> + VCLK2_SOFT_RESET, 0);
>>>>> +
>>>>> + /* enable encl_clk */
>>>>> + regmap_update_bits(priv->hhi, HHI_VID_CLK_CNTL2,
>>>>> + CTS_ENCL_EN, CTS_ENCL_EN);
>>>>> +
>>>>> + usleep_range(10000, 11000);
>>>>> +}
>>>>> +
>>>>> +static int dw_mipi_dsi_phy_init(void *priv_data)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
>>>>> + struct meson_drm *priv = mipi_dsi->priv;
>>>>> +
>>>>> +
>>>>> + phy_power_on(mipi_dsi->phy);
>>>>> +
>>>>> + writel_relaxed(1, priv->io_base + _REG(ENCL_VIDEO_EN));
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static void dw_mipi_dsi_phy_power_off(void *priv_data)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
>>>>> +
>>>>> + phy_power_off(mipi_dsi->phy);
>>>>> +}
>>>>> +
>>>>> +static int
>>>>> +dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>>>>> + unsigned long mode_flags, u32 lanes, u32 format,
>>>>> + unsigned int *lane_mbps)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
>>>>> +
>>>>> + *lane_mbps = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate / 1000000;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int
>>>>> +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
>>>>> + struct dw_mipi_dsi_dphy_timing *timing)
>>>>> +{
>>>>> + /* TOFIX handle other cases */
>>>>> +
>>>>> + timing->clk_lp2hs = 37;
>>>>> + timing->clk_hs2lp = 135;
>>>>> + timing->data_lp2hs = 50;
>>>>> + timing->data_hs2lp = 3;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int
>>>>> +dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
>>>>> +{
>>>>> + *esc_clk_rate = 4; /* Mhz */
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
>>>>> + .init = dw_mipi_dsi_phy_init,
>>>>> + .power_off = dw_mipi_dsi_phy_power_off,
>>>>> + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
>>>>> + .get_timing = dw_mipi_dsi_phy_get_timing,
>>>>> + .get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
>>>>> +};
>>>>> +
>>>>> +/* Encoder */
>>>>> +
>>>>> +static void meson_mipi_dsi_encoder_destroy(struct drm_encoder *encoder)
>>>>> +{
>>>>> + drm_encoder_cleanup(encoder);
>>>>> +}
>>>>> +
>>>>> +static const struct drm_encoder_funcs meson_mipi_dsi_encoder_funcs = {
>>>>> + .destroy = meson_mipi_dsi_encoder_destroy,
>>>>> +};
>>>>> +
>>>>> +static int meson_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
>>>>> + struct drm_crtc_state *crtc_state,
>>>>> + struct drm_connector_state *conn_state)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi =
>>>>> + encoder_to_meson_dw_mipi_dsi(encoder);
>>>>> +
>>>>> + switch (mipi_dsi->dsi_device->format) {
>>>>> + case MIPI_DSI_FMT_RGB888:
>>>>> + break;
>>>>> + case MIPI_DSI_FMT_RGB666:
>>>>> + break;
>>>>> + case MIPI_DSI_FMT_RGB666_PACKED:
>>>>> + case MIPI_DSI_FMT_RGB565:
>>>>> + default:
>>>>> + DRM_DEV_ERROR(mipi_dsi->dev,
>>>>> + "invalid pixel format %d\n",
>>>>> + mipi_dsi->dsi_device->format);
>>>>> + return -EINVAL;
>>>>> + };
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static void meson_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi =
>>>>> + encoder_to_meson_dw_mipi_dsi(encoder);
>>>>> + struct meson_drm *priv = mipi_dsi->priv;
>>>>> +
>>>>> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
>>>>> +}
>>>>> +
>>>>> +static void meson_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi =
>>>>> + encoder_to_meson_dw_mipi_dsi(encoder);
>>>>> + struct meson_drm *priv = mipi_dsi->priv;
>>>>> +
>>>>> + writel_bits_relaxed(BIT(3), BIT(3),
>>>>> + priv->io_base + _REG(ENCL_VIDEO_MODE_ADV));
>>>>> + writel_relaxed(0, priv->io_base + _REG(ENCL_TST_EN));
>>>>> +}
>>>>> +
>>>>> +static void meson_dw_mipi_dsi_init(struct meson_dw_mipi_dsi *mipi_dsi)
>>>>> +{
>>>>> + writel_relaxed((1 << 4) | (1 << 5) | (0 << 6),
>>>>> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
>>>>> +
>>>>> + writel_bits_relaxed(0xf, 0xf,
>>>>> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
>>>>> + writel_bits_relaxed(0xf, 0,
>>>>> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
>>>>> +
>>>>> + writel_bits_relaxed(0x3, 0x3,
>>>>> + mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
>>>>> +
>>>>> + writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
>>>>> +}
>>>>> +
>>>>> +static void meson_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
>>>>> + struct drm_display_mode *mode,
>>>>> + struct drm_display_mode *adjusted_mode)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = encoder_to_meson_dw_mipi_dsi(encoder);
>>>>> + unsigned int dpi_data_format, venc_data_width;
>>>>> + struct meson_drm *priv = mipi_dsi->priv;
>>>>> + int bpp;
>>>>> + u32 reg;
>>>>> +
>>>>> + mipi_dsi->mode_flags = mode->flags;
>>>>> +
>>>>> + bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
>>>>> +
>>>>> + phy_mipi_dphy_get_default_config(mode->clock * 1000,
>>>>> + bpp, mipi_dsi->dsi_device->lanes,
>>>>> + &mipi_dsi->phy_opts.mipi_dphy);
>>>>> +
>>>>> + phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
>>>>> +
>>>>> + switch (mipi_dsi->dsi_device->format) {
>>>>> + case MIPI_DSI_FMT_RGB888:
>>>>> + dpi_data_format = COLOR_24BIT;
>>>>> + venc_data_width = MIPI_DSI_VENC_COLOR_24B;
>>>>> + break;
>>>>> + case MIPI_DSI_FMT_RGB666:
>>>>> + dpi_data_format = COLOR_18BIT_CFG_2;
>>>>> + venc_data_width = MIPI_DSI_VENC_COLOR_18B;
>>>>> + break;
>>>>> + case MIPI_DSI_FMT_RGB666_PACKED:
>>>>> + case MIPI_DSI_FMT_RGB565:
>>>>> + /* invalid */
>>>>> + break;
>>>>> + };
>>>>> +
>>>>> + dw_mipi_dsi_set_vclk(mipi_dsi, mode);
>>>>> + meson_venc_mipi_dsi_mode_set(priv, mode);
>>>>> +
>>>>> + meson_encl_load_gamma(priv);
>>>>> +
>>>>> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
>>>>> +
>>>>> + meson_dw_mipi_dsi_init(mipi_dsi);
>>>>> +
>>>>> + /* Configure Set color format for DPI register */
>>>>> + reg = readl_relaxed(mipi_dsi->base + MIPI_DSI_TOP_CNTL) &
>>>>> + ~(0xf<<BIT_DPI_COLOR_MODE) &
>>>>> + ~(0x7<<BIT_IN_COLOR_MODE) &
>>>>> + ~(0x3<<BIT_CHROMA_SUBSAMPLE);
>>>>> +
>>>>> + writel_relaxed(reg |
>>>>> + (dpi_data_format << BIT_DPI_COLOR_MODE) |
>>>>> + (venc_data_width << BIT_IN_COLOR_MODE) |
>>>>> + 0 << BIT_COMP0_SEL |
>>>>> + 1 << BIT_COMP1_SEL |
>>>>> + 2 << BIT_COMP2_SEL |
>>>>> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NHSYNC ? 0 : BIT(BIT_HSYNC_POL)) |
>>>>> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NVSYNC ? 0 : BIT(BIT_VSYNC_POL)),
>>>>> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
>>>>> +}
>>>>> +
>>>>> +static const struct drm_encoder_helper_funcs
>>>>> + meson_mipi_dsi_encoder_helper_funcs = {
>>>>> + .atomic_check = meson_mipi_dsi_encoder_atomic_check,
>>>>> + .disable = meson_mipi_dsi_encoder_disable,
>>>>> + .enable = meson_mipi_dsi_encoder_enable,
>>>>> + .mode_set = meson_mipi_dsi_encoder_mode_set,
>>>>> +};
>>>>> +
>>>>> +static int meson_dw_mipi_dsi_bind(struct device *dev, struct device *master,
>>>>> + void *data)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
>>>>> + struct drm_device *drm = data;
>>>>> + struct meson_drm *priv = drm->dev_private;
>>>>> + struct drm_encoder *encoder;
>>>>> + int ret;
>>>>> +
>>>>> + /* Check before if we are supposed to have a sub-device... */
>>>>> + if (!mipi_dsi->dsi_device)
>>>>> + return -EPROBE_DEFER;
>>>>> +
>>>>> + encoder = &mipi_dsi->encoder;
>>>>> + mipi_dsi->priv = priv;
>>>>> +
>>>>> + /* Encoder */
>>>>> + ret = drm_encoder_init(drm, encoder, &meson_mipi_dsi_encoder_funcs,
>>>>> + DRM_MODE_ENCODER_DSI, "meson_mipi_dsi");
>>>>> + if (ret) {
>>>>> + dev_err(priv->dev, "Failed to init DSI encoder\n");
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + drm_encoder_helper_add(encoder, &meson_mipi_dsi_encoder_helper_funcs);
>>>>> +
>>>>> + encoder->possible_crtcs = BIT(0);
>>>>> +
>>>>> + ret = dw_mipi_dsi_bind(mipi_dsi->dmd, encoder);
>>>>> + if (ret) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + phy_init(mipi_dsi->phy);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static void meson_dw_mipi_dsi_unbind(struct device *dev, struct device *master,
>>>>> + void *data)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
>>>>> +
>>>>> + dw_mipi_dsi_remove(mipi_dsi->dmd);
>>>>> +
>>>>> + phy_exit(mipi_dsi->phy);
>>>>> +}
>>>>> +
>>>>> +static const struct component_ops meson_dw_mipi_dsi_ops = {
>>>>> + .bind = meson_dw_mipi_dsi_bind,
>>>>> + .unbind = meson_dw_mipi_dsi_unbind,
>>>>> +};
>>>>> +
>>>>> +static int meson_dw_mipi_dsi_host_attach(void *priv_data,
>>>>> + struct mipi_dsi_device *device)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
>>>>> +
>>>>> + mipi_dsi->dsi_device = device;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int meson_dw_mipi_dsi_host_detach(void *priv_data,
>>>>> + struct mipi_dsi_device *device)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
>>>>> +
>>>>> + if (device == mipi_dsi->dsi_device)
>>>>> + mipi_dsi->dsi_device = NULL;
>>>>> + else
>>>>> + return -EINVAL;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct dw_mipi_dsi_host_ops meson_dw_mipi_dsi_host_ops = {
>>>>> + .attach = meson_dw_mipi_dsi_host_attach,
>>>>> + .detach = meson_dw_mipi_dsi_host_detach,
>>>>> +};
>>>>> +
>>>>> +static int meson_dw_mipi_dsi_probe(struct platform_device *pdev)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi;
>>>>> + struct reset_control *top_rst;
>>>>> + struct resource *res;
>>>>> + int ret;
>>>>> +
>>>>> + mipi_dsi = devm_kzalloc(&pdev->dev, sizeof(*mipi_dsi), GFP_KERNEL);
>>>>> + if (!mipi_dsi)
>>>>> + return -ENOMEM;
>>>>> +
>>>>> + mipi_dsi->dev = &pdev->dev;
>>>>> +
>>>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>> + mipi_dsi->base = devm_ioremap_resource(&pdev->dev, res);
>>>>> + if (IS_ERR(mipi_dsi->base))
>>>>> + return PTR_ERR(mipi_dsi->base);
>>>>> +
>>>>> + mipi_dsi->phy = devm_phy_get(&pdev->dev, "dphy");
>>>>> + if (IS_ERR(mipi_dsi->phy)) {
>>>>> + ret = PTR_ERR(mipi_dsi->phy);
>>>>> + dev_err(&pdev->dev, "failed to get mipi dphy: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + mipi_dsi->px_clk = devm_clk_get(&pdev->dev, "px_clk");
>>>>> + if (IS_ERR(mipi_dsi->px_clk)) {
>>>>> + dev_err(&pdev->dev, "Unable to get PLL clk\n");
>>>>> + return PTR_ERR(mipi_dsi->px_clk);
>>>>> + }
>>>>> +
>>>>> + /*
>>>>> + * We use a TOP reset signal because the APB reset signal
>>>>> + * is handled by the TOP control registers.
>>>>> + */
>>>>> + top_rst = devm_reset_control_get_exclusive(&pdev->dev, "top");
>>>>> + if (IS_ERR(top_rst)) {
>>>>> + ret = PTR_ERR(top_rst);
>>>>> +
>>>>> + if (ret != -EPROBE_DEFER)
>>>>> + dev_err(&pdev->dev, "Unable to get reset control: %d\n", ret);
>>>>> +
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + ret = clk_prepare_enable(mipi_dsi->px_clk);
>>>>> + if (ret) {
>>>>> + dev_err(&pdev->dev, "Unable to prepare/enable PX clock\n");
>>>>> + goto err_clkdisable;
>>>>> + }
>>>>> +
>>>>> + reset_control_assert(top_rst);
>>>>> + usleep_range(10, 20);
>>>>> + reset_control_deassert(top_rst);
>>>>> +
>>>>> + /* MIPI DSI Controller */
>>>>> +
>>>>> + mipi_dsi->pdata.base = mipi_dsi->base;
>>>>> + mipi_dsi->pdata.max_data_lanes = 4;
>>>>> + mipi_dsi->pdata.phy_ops = &meson_dw_mipi_dsi_phy_ops;
>>>>> + mipi_dsi->pdata.host_ops = &meson_dw_mipi_dsi_host_ops;
>>>>> + mipi_dsi->pdata.priv_data = mipi_dsi;
>>>>> + platform_set_drvdata(pdev, mipi_dsi);
>>>>> +
>>>>> + mipi_dsi->dmd = dw_mipi_dsi_probe(pdev, &mipi_dsi->pdata);
>>>>> + if (IS_ERR(mipi_dsi->dmd)) {
>>>>> + ret = PTR_ERR(mipi_dsi->dmd);
>>>>> + if (ret != -EPROBE_DEFER)
>>>>> + dev_err(&pdev->dev,
>>>>> + "Failed to probe dw_mipi_dsi: %d\n", ret);
>>>>> + goto err_clkdisable;
>>>>> + }
>>>>> +
>>>>> + return component_add(mipi_dsi->dev, &meson_dw_mipi_dsi_ops);
>>>>> +
>>>>> +err_clkdisable:
>>>>> + clk_disable_unprepare(mipi_dsi->px_clk);
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static int meson_dw_mipi_dsi_remove(struct platform_device *pdev)
>>>>> +{
>>>>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(&pdev->dev);
>>>>> +
>>>>> + component_del(mipi_dsi->dev, &meson_dw_mipi_dsi_ops);
>>>>> +
>>>>> + clk_disable_unprepare(mipi_dsi->px_clk);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct of_device_id meson_dw_mipi_dsi_of_table[] = {
>>>>> + { .compatible = "amlogic,meson-axg-dw-mipi-dsi", },
>>>>> + { }
>>>>> +};
>>>>> +MODULE_DEVICE_TABLE(of, meson_dw_mipi_dsi_of_table);
>>>>> +
>>>>> +static struct platform_driver meson_dw_mipi_dsi_platform_driver = {
>>>>> + .probe = meson_dw_mipi_dsi_probe,
>>>>> + .remove = meson_dw_mipi_dsi_remove,
>>>>> + .driver = {
>>>>> + .name = DRIVER_NAME,
>>>>> + .of_match_table = meson_dw_mipi_dsi_of_table,
>>>>> + },
>>>>> +};
>>>>> +module_platform_driver(meson_dw_mipi_dsi_platform_driver);
>>>>> +
>>>>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@...libre.com>");
>>>>> +MODULE_DESCRIPTION(DRIVER_DESC);
>>>>> +MODULE_LICENSE("GPL");
>>>>> --
>>>>> 2.22.0
>>>>>
>>>>
>>>> --
>>>> Daniel Vetter
>>>> Software Engineer, Intel Corporation
>>>> http://blog.ffwll.ch
>>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@...ts.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
Powered by blists - more mailing lists