| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_Jsq+jjzFR0ZdFO5dEp2w2D2uzSAB9tdih9tnuN987LABbiA@mail.gmail.com>
Date: Tue, 8 Sep 2020 11:20:39 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Andre Przywara <andre.przywara@....com>
Cc: devicetree@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Viresh Kumar <vireshk@...nel.org>,
LINUX-WATCHDOG <linux-watchdog@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Chanho Min <chanho.min@....com>,
Linus Walleij <linus.walleij@...aro.org>,
Liviu Dudau <liviu.dudau@....com>,
Li Yang <leoyang.li@....com>, Shawn Guo <shawnguo@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
"maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE"
<bcm-kernel-feedback-list@...adcom.com>,
Sudeep Holla <sudeep.holla@....com>,
Wei Xu <xuwei5@...ilicon.com>
Subject: Re: [PATCH 01/10] dt-bindings: watchdog: sp-805: Convert to Json-schema
On Fri, Aug 28, 2020 at 7:06 AM Andre Przywara <andre.przywara@....com> wrote:
>
> Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.
>
> A straight-forward conversion, but the requirement for providing two
> clocks got strengthened from "should" to "must".
>
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> ---
> .../bindings/watchdog/arm,sp805.txt | 32 --------
> .../bindings/watchdog/arm,sp805.yaml | 75 +++++++++++++++++++
> 2 files changed, 75 insertions(+), 32 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
>
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> deleted file mode 100644
> index bee6f1f0e41b..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -ARM AMBA Primecell SP805 Watchdog
> -
> -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
> -can be used to identify the peripheral type, vendor, and revision.
> -This value can be used for driver matching.
> -
> -As SP805 WDT is a primecell IP, it follows the base bindings specified in
> -'arm/primecell.txt'
> -
> -Required properties:
> -- compatible: Should be "arm,sp805" & "arm,primecell"
> -- reg: Should contain location and length for watchdog timer register
> -- clocks: Clocks driving the watchdog timer hardware. This list should be
> - 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
> - wdog_clk can be equal to or be a sub-multiple of the apb_pclk
> - frequency
> -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
> - second one
> -
> -Optional properties:
> -- interrupts: Should specify WDT interrupt number
> -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
> - default timeout is determined by the driver
> -
> -Example:
> - watchdog@...90000 {
> - compatible = "arm,sp805", "arm,primecell";
> - reg = <0x66090000 0x1000>;
> - interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&wdt_clk>, <&apb_pclk>;
> - clock-names = "wdog_clk", "apb_pclk";
> - };
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> new file mode 100644
> index 000000000000..980e155d3387
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM AMBA Primecell SP805 Watchdog
> +
> +maintainers:
> + - Viresh Kumar <vireshk@...nel.org>
> +
> +description: |+
> + The Arm SP805 IP implements a watchdog device, which triggers an interrupt
> + after a configurable time period. If that interrupt has not been serviced
> + when the next interrupt would be triggered, the reset signal is asserted.
> +
> +allOf:
> + - $ref: /schemas/arm/primecell.yaml#
Should also ref watchdog.yaml here.
> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> + properties:
> + compatible:
> + contains:
> + const: arm,sp805
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - const: arm,sp805
> + - const: arm,primecell
> +
> + interrupts:
> + maxItems: 1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + Clocks driving the watchdog timer hardware. The first clock is used
> + for the actual watchdog counter. The second clock drives the register
> + interface.
> + minItems: 2
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: wdog_clk
> + - const: apb_pclk
> +
> + timeout-sec:
> + description: |
> + Should specify default WDT timeout in seconds. If unset, the default
> + timeout is determined by the driver.
> + $ref: /schemas/types.yaml#/definitions/uint32
You can drop this as it is part of watchdog.yaml.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
Add:
unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + watchdog@...90000 {
> + compatible = "arm,sp805", "arm,primecell";
> + reg = <0x66090000 0x1000>;
> + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&wdt_clk>, <&apb_pclk>;
> + clock-names = "wdog_clk", "apb_pclk";
> + };
> --
> 2.17.1
>
Powered by blists - more mailing lists