[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 9 Sep 2020 06:56:57 +0000
From: Joel Stanley <joel@....id.au>
To: Eddie James <eajames@...ux.ibm.com>
Cc: linux-input@...r.kernel.org,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
linux-i2c@...r.kernel.org, Andrew Jeffery <andrew@...id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Brendan Higgins <brendanhiggins@...gle.com>,
dmitry.torokhov@...il.com, Rob Herring <robh+dt@...nel.org>,
wsa@...nel.org, Tao Ren <rentao.bupt@...il.com>,
Ryan Chen <ryan_chen@...eedtech.com>
Subject: Re: [PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel
I2C device
On Tue, 8 Sep 2020 at 20:01, Eddie James <eajames@...ux.ibm.com> wrote:
>
> Set I2C bus 0 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <eajames@...ux.ibm.com>
> Reviewed-by: Joel Stanley <joel@....id.au>
I will take this and the rainier dts patch through the aspeed tree so
we don't get conflicts.
Eddie, when you send v3, you can omit them.
Cheers,
Joel
> ---
> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> index 5f4ee67ac787..4d070d6ba09f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> @@ -4,6 +4,7 @@
>
> #include "aspeed-g6.dtsi"
> #include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> #include <dt-bindings/leds/leds-pca955x.h>
>
> / {
> @@ -438,7 +439,13 @@ aliases {
> };
>
> &i2c0 {
> + multi-master;
> status = "okay";
> +
> + ibm-panel@62 {
> + compatible = "ibm,op-panel";
> + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> + };
> };
>
> &i2c1 {
> --
> 2.26.2
>
Powered by blists - more mailing lists