[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200910161219.6237-3-krzk@kernel.org>
Date: Thu, 10 Sep 2020 18:12:13 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Krzysztof Opasiak <k.opasiak@...sung.com>,
Kukjin Kim <kgene@...nel.org>, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-nfc@...ts.01.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH v3 2/8] dt-bindings: net: nfc: s3fwrn5: Remove wrong vendor prefix from GPIOs
The device tree property prefix describes the vendor, which in case of
S3FWRN5 chip is Samsung. Therefore the "s3fwrn5" prefix for "en-gpios"
and "fw-gpios" is not correct and should be deprecated. Introduce
properly named properties for these GPIOs and rename the fw-gpios" to
"wake-gpios" to better describe its purpose.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index f43d31a2d94b..cb0b8a560282 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -14,30 +14,42 @@ properties:
compatible:
const: samsung,s3fwrn5-i2c
+ en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
interrupts:
maxItems: 1
reg:
maxItems: 1
+ wake-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
s3fwrn5,en-gpios:
maxItems: 1
+ deprecated: true
description:
- Output GPIO pin used for enabling/disabling the chip
+ Use en-gpios
s3fwrn5,fw-gpios:
maxItems: 1
+ deprecated: true
description:
- Output GPIO pin used to enter firmware mode and sleep/wakeup control
+ Use wake-gpios
additionalProperties: false
required:
- compatible
+ - en-gpios
- interrupts
- reg
- - s3fwrn5,en-gpios
- - s3fwrn5,fw-gpios
+ - wake-gpios
examples:
- |
@@ -55,7 +67,7 @@ examples:
interrupt-parent = <&gpa1>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
- s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
- s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
};
};
--
2.17.1
Powered by blists - more mailing lists