linux-kernel - Re: [PATCH v11 04/11] PCI: brcmstb: Add suspend and resume pm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAL_JsqJR4wALnsFKKPQ8h2y-o-933rzxHbV29zGXiptgYuuHTg@mail.gmail.com>
Date:   Thu, 10 Sep 2020 12:50:34 -0600
From:   Rob Herring <robh@...nel.org>
To:     Jim Quinlan <james.quinlan@...adcom.com>
Cc:     "open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS" 
        <linux-pci@...r.kernel.org>,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Christoph Hellwig <hch@....de>,
        Robin Murphy <robin.murphy@....com>,
        "maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE" 
        <bcm-kernel-feedback-list@...adcom.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-rpi-kernel@...ts.infradead.org>,
        "moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v11 04/11] PCI: brcmstb: Add suspend and resume pm_ops

On Thu, Sep 10, 2020 at 10:42 AM Jim Quinlan <james.quinlan@...adcom.com> wrote:
>
> On Thu, Sep 10, 2020 at 11:56 AM Rob Herring <robh@...nel.org> wrote:
> >
> > On Mon, Aug 24, 2020 at 03:30:17PM -0400, Jim Quinlan wrote:
> > > From: Jim Quinlan <jquinlan@...adcom.com>
> > >
> > > Broadcom Set-top (BrcmSTB) boards typically support S2, S3, and S5 suspend
> > > and resume.  Now the PCIe driver may do so as well.
> > >
> > > Signed-off-by: Jim Quinlan <jquinlan@...adcom.com>
> > > Acked-by: Florian Fainelli <f.fainelli@...il.com>
> > > ---
> > >  drivers/pci/controller/pcie-brcmstb.c | 47 +++++++++++++++++++++++++++
> > >  1 file changed, 47 insertions(+)
> > >
> > > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > > index c2b3d2946a36..3d588ab7a6dd 100644
> > > --- a/drivers/pci/controller/pcie-brcmstb.c
> > > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > > @@ -978,6 +978,47 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
> > >       brcm_pcie_bridge_sw_init_set(pcie, 1);
> > >  }
> > >
> > > +static int brcm_pcie_suspend(struct device *dev)
> > > +{
> > > +     struct brcm_pcie *pcie = dev_get_drvdata(dev);
> > > +
> > > +     brcm_pcie_turn_off(pcie);
> > > +     clk_disable_unprepare(pcie->clk);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > > +static int brcm_pcie_resume(struct device *dev)
> > > +{
> > > +     struct brcm_pcie *pcie = dev_get_drvdata(dev);
> > > +     void __iomem *base;
> > > +     u32 tmp;
> > > +     int ret;
> > > +
> > > +     base = pcie->base;
> > > +     clk_prepare_enable(pcie->clk);
> > > +
> > > +     /* Take bridge out of reset so we can access the SERDES reg */
> > > +     brcm_pcie_bridge_sw_init_set(pcie, 0);
> > > +
> > > +     /* SERDES_IDDQ = 0 */
> > > +     tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> > > +     u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
> > > +     writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> > > +
> > > +     /* wait for serdes to be stable */
> > > +     udelay(100);
> >
> > Really needs to be a spinloop?
> >
> > > +
> > > +     ret = brcm_pcie_setup(pcie);
> > > +     if (ret)
> > > +             return ret;
> > > +
> > > +     if (pcie->msi)
> > > +             brcm_msi_set_regs(pcie->msi);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > >  static void __brcm_pcie_remove(struct brcm_pcie *pcie)
> > >  {
> > >       brcm_msi_remove(pcie);
> > > @@ -1087,12 +1128,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > >
> > >  MODULE_DEVICE_TABLE(of, brcm_pcie_match);
> > >
> > > +static const struct dev_pm_ops brcm_pcie_pm_ops = {
> > > +     .suspend_noirq = brcm_pcie_suspend,
> > > +     .resume_noirq = brcm_pcie_resume,
> >
> > Why do you need interrupts disabled? There's 39 cases of .suspend_noirq
> > and 1352 of .suspend in the tree.
>
> I will test switching this to  suspend_late/resume_early.

Why not just the 'regular' flavor suspend/resume?

Rob