linux-kernel - Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support for LEDs controlled by Marvell PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Sep 2020 22:31:12 +0200
From:   Marek Behun <marek.behun@....cz>
To:     Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc:     Andrew Lunn <andrew@...n.ch>, Pavel Machek <pavel@....cz>,
        netdev@...r.kernel.org, linux-leds@...r.kernel.org,
        Dan Murphy <dmurphy@...com>,
        Ondřej Jirman <megous@...ous.com>,
        linux-kernel@...r.kernel.org,
        Matthias Schiffer <matthias.schiffer@...tq-group.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support
 for LEDs controlled by Marvell PHYs

On Thu, 10 Sep 2020 19:34:35 +0100
Russell King - ARM Linux admin <linux@...linux.org.uk> wrote:

> On Thu, Sep 10, 2020 at 08:31:54PM +0200, Andrew Lunn wrote:
> > Generally the driver will default to the hardware reset blink
> > pattern. There are a few PHY drivers which change this at probe, but
> > not many. The silicon defaults are pretty good.  
> 
> The "right" blink pattern can be a matter of how the hardware is
> wired.  For example, if you have bi-colour LEDs and the PHY supports
> special bi-colour mixing modes.
> 

Have you seen such, Russell? This could be achieved via the multicolor
LED framework, but I don't have a device which uses such LEDs, so I
did not write support for this in the Marvell PHY driver.

(I guess I could test it though, since on my device LED0 and LED1
are used, and this to can be put into bi-colour LED mode.)