Message-ID: <20200910020742.GA748627@bjorn-Precision-5520>
Date:   Wed, 9 Sep 2020 21:07:42 -0500
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Xingxing Su <suxingxing@...ngson.cn>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Mark Tomlinson <mark.tomlinson@...iedtelesis.co.nz>,
        Florian Fainelli <f.fainelli@...il.com>,
        Rob Herring <robh@...nel.org>,
        Scott Branden <scott.branden@...adcom.com>
Subject: Re: [PATCH] PCI: Don't use Printk in raw_spinlocks

[+cc Mark, Florian, Rob, Scott]

On Sat, Aug 01, 2020 at 09:25:49AM +0800, Xingxing Su wrote:
> Do not use printk in raw_spinlocks, 
> it will cause BUG: Invalid wait context.
> 
> The trace reported by lockdep follows.
> 
> [    2.986113] =============================
> [    2.986115] [ BUG: Invalid wait context ]
> [    2.986116] 5.8.0-rc1+ #11 Not tainted
> [    2.986118] -----------------------------
> [    2.986120] swapper/0/1 is trying to lock:
> [    2.986122] ffffffff80f5ddd8 (console_owner){....}-{3:3}, at: console_unlock+0x284/0x820
> [    2.986130] other info that might help us debug this:
> [    2.986132] context-{5:5}
> [    2.986134] 3 locks held by swapper/0/1:
> [    2.986135]  #0: 98000007fa03c990 (&dev->mutex){....}-{0:0}, at: device_driver_attach+0x28/0x90
> [    2.986144]  #1: ffffffff80fb83a8 (pci_lock){....}-{2:2}, at: pci_bus_write_config_word+0x60/0xb8
> [    2.986152]  #2: ffffffff80f5ded0 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x1b0/0x3b8
> [    2.986161] stack backtrace:
> [    2.986163] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #11
> [    2.986164] Stack : 0000000000001d67 98000000030be9b0 0000000000000001 7b2aba74f6c4785b
> [    2.986172]         7b2aba74f6c4785b 0000000000000000 98000007f89cb438 ffffffff80e7dc80
> [    2.986181]         0000000000000001 000000000000000a 0000000000000001 0000000000000001
> [    2.986189]         ffffffff80f4e156 fffffffffffffffd ffffffff80cc2d98 fffffffff8000000
> [    2.986197]         0000000024000000 ffffffff80f40000 0000000000000000 0000000000000000
> [    2.986205]         ffffffff9500cce0 0000000000000000 ffffffff80f50000 ffffffff81546318
> [    2.986213]         ffffffff81c4c3c0 0000000000000018 ffffffffbc000000 0000000000000000
> [    2.986221]         ffffffff81340000 98000007f89c8000 98000007f89cb430 98000007f8a00000
> [    2.986229]         ffffffff806be568 0000000000000000 0000000000000000 0000000000000000
> [    2.986237]         0000000000000000 0000000000000000 ffffffff80211c1c 7b2aba74f6c4785b
> [    2.986245]         ...
> [    2.986250] Call Trace:
> [    2.986251] [<ffffffff80211c1c>] show_stack+0x9c/0x130
> [    2.986253] [<ffffffff806be568>] dump_stack+0xe8/0x150
> [    2.986255] [<ffffffff802ad408>] __lock_acquire+0x570/0x3250
> [    2.986257] [<ffffffff802abed0>] lock_acquire+0x118/0x558
> [    2.986259] [<ffffffff802be764>] console_unlock+0x2e4/0x820
> [    2.986261] [<ffffffff802c0a68>] vprintk_emit+0x1c0/0x3b8
> [    2.986263] [<ffffffff807f45a8>] dev_vprintk_emit+0x1c8/0x210
> [    2.986265] [<ffffffff807f462c>] dev_printk_emit+0x3c/0x60
> [    2.986267] [<ffffffff807f499c>] _dev_warn+0x5c/0x80
> [    2.986269] [<ffffffff806eea9c>] pci_generic_config_write32+0x154/0x160
> [    2.986271] [<ffffffff806edca4>] pci_bus_write_config_word+0x84/0xb8
> [    2.986273] [<ffffffff806f1664>] pci_setup_device+0x22c/0x768
> [    2.986275] [<ffffffff806f26a0>] pci_scan_single_device+0xc8/0x100
> [    2.986277] [<ffffffff806f2788>] pci_scan_slot+0xb0/0x178
> [    2.986279] [<ffffffff806f3ae4>] pci_scan_child_bus_extend+0x5c/0x370
> [    2.986281] [<ffffffff806f407c>] pci_scan_root_bus_bridge+0x6c/0xf0
> [    2.986283] [<ffffffff806f411c>] pci_host_probe+0x1c/0xd8
> [    2.986285] [<ffffffff807fa03c>] platform_drv_probe+0x54/0xb8
> [    2.986287] [<ffffffff807f71f8>] really_probe+0x130/0x388
> [    2.986289] [<ffffffff807f7594>] driver_probe_device+0x64/0xd8
> [    2.986291] [<ffffffff807f7844>] device_driver_attach+0x84/0x90
> [    2.986293] [<ffffffff807f7918>] __driver_attach+0xc8/0x128
> [    2.986295] [<ffffffff807f4cac>] bus_for_each_dev+0x74/0xd8
> [    2.986297] [<ffffffff807f6408>] bus_add_driver+0x170/0x250
> [    2.986299] [<ffffffff807f899c>] driver_register+0x84/0x150
> [    2.986301] [<ffffffff80200b08>] do_one_initcall+0x98/0x458
> [    2.986303] [<ffffffff810212dc>] kernel_init_freeable+0x2c0/0x36c
> [    2.986305] [<ffffffff80be7540>] kernel_init+0x10/0x128
> [    2.986307] [<ffffffff80209d44>] ret_from_kernel_thread+0x14/0x1c
> 
> Signed-off-by: Xingxing Su <suxingxing@...ngson.cn>
> ---
>  drivers/pci/access.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> index 79c4a2e..b3fc164 100644
> --- a/drivers/pci/access.c
> +++ b/drivers/pci/access.c
> @@ -160,9 +160,6 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
>  	 * write happen to have any RW1C (write-one-to-clear) bits set, we
>  	 * just inadvertently cleared something we shouldn't have.
>  	 */
> -	dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
> -			     size, pci_domain_nr(bus), bus->number,
> -			     PCI_SLOT(devfn), PCI_FUNC(devfn), where);

We just changed this printk (see [1]), but I think we still have this
lockdep problem even after Mark's change.  So I guess we need another
think about this.

Maybe we can print something when registering pci_ops that use
pci_generic_config_write32()?

[1] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?h=pci/enumeration&id=92ff4b49c2a9

>  	mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
>  	tmp = readl(addr) & mask;
> -- 
> 2.1.0
> 

Powered by blists - more mailing lists