linux-kernel - Re: [PATCH V5 1/4] arm64: dts: qcom: sc7180: Improve the pin config settings for CTS and TX

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <010101747ca8ea89-168fbb95-b789-4294-81dc-82561c314bf4-000000@us-west-2.amazonses.com>
Date:   Fri, 11 Sep 2020 10:14:39 +0000
From:   skakit@...eaurora.org
To:     Doug Anderson <dianders@...omium.org>
Cc:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        Akash Asthana <akashast@...eaurora.org>,
        Roja Rani Yarubandi <rojay@...eaurora.org>,
        msavaliy@....qualcomm.com
Subject: Re: [PATCH V5 1/4] arm64: dts: qcom: sc7180: Improve the pin config
 settings for CTS and TX

Hi Doug,

On 2020-09-10 20:10, Doug Anderson wrote:
> Hi,
> 
> On Thu, Sep 10, 2020 at 5:55 AM satya priya <skakit@...eaurora.org> 
> wrote:
>> 
>> Remove output-high from CTS and TX as this is not really required. 
>> During
>> bringup to fix transfer failures this was added to match with console 
>> uart
>> settings. Probably some boot loader config was missing then. As it is
>> working fine now, remove it.
>> 
>> Signed-off-by: satya priya <skakit@...eaurora.org>
>> Reviewed-by: Akash Asthana <akashast@...eaurora.org>
>> Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
>> ---
>> Changes in V4:
>>  - This is newly added in V4 to separate the improvements in pin 
>> settings
>>    and wakeup related changes.
>> 
>> Changes in V5:
>>  - As per Doug's comment configured pull-down for CTS pin as earlier.
>> 
>>  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 10 ++++------
>>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> Looks fine to me.  Slight nit that this only applies to the IDP board
> but ${SUBJECT} makes it sound as if this applies to all sc7180.  I
> wouldn't spin just for that, though.  If Bjorn agrees, he can always
> adjust the subject when applying.
> 
> Reviewed-by: Douglas Anderson <dianders@...omium.org>

Thanks for reviewing the patches, i will correct this nit in my next 
version.

Thanks,
Satya Priya