linux-kernel - Re: [PATCH V5 3/4] arm64: dts: qcom: sc7180-trogdor: Add pinctrl and interrupt config for BT UART

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <010101747ca98b3d-4779e154-4358-4b4f-8fe7-1f1840dbd72a-000000@us-west-2.amazonses.com>
Date:   Fri, 11 Sep 2020 10:15:20 +0000
From:   skakit@...eaurora.org
To:     Doug Anderson <dianders@...omium.org>
Cc:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>, LKML <linux-kernel@...r.kernel.org>,
        Akash Asthana <akashast@...eaurora.org>,
        Roja Rani Yarubandi <rojay@...eaurora.org>,
        msavaliy@....qualcomm.com
Subject: Re: [PATCH V5 3/4] arm64: dts: qcom: sc7180-trogdor: Add pinctrl and
 interrupt config for BT UART

On 2020-09-10 20:12, Doug Anderson wrote:
> Hi,
> 
> On Thu, Sep 10, 2020 at 5:55 AM satya priya <skakit@...eaurora.org> 
> wrote:
>> 
>> Add a suitable sleep configuration for uart3 to support Bluetooth 
>> wakeup.
>> 
>> If QUP function is selected in sleep state, UART RTS/RFR is pulled 
>> high
>> during suspend and BT SoC not able to send wakeup bytes. So, configure
>> GPIO mode in sleep state to keep it low during suspend.
>> 
>> Signed-off-by: satya priya <skakit@...eaurora.org>
>> ---
>> Changes in V5:
>>  - Newly added in V5. This patch adds wakeup support for trogdor board 
>> files.
>> 
>>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 48 
>> ++++++++++++++++++++++++++++
>>  1 file changed, 48 insertions(+)
> 
> Note: I can't find this email on any of the mailing lists.  Can you
> check your config?  I tried:
> 
> http://lore.kernel.org/r/1599742438-16811-4-git-send-email-skakit@codeaurora.org
> 
> ...and also checked patchwork servers.  I only see patch 1 and 2.  I
> think Bjorn usually applies from patchwork so this'll likely be a
> problem...
> 

I guess it is updated, now it is showing all the 4 patches
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=346637

> 
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index a6b9beb..96b5331 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -792,6 +792,11 @@ ap_spi_fp: &spi10 {
>>  #include <arm/cros-ec-sbs.dtsi>
>> 
>>  &uart3 {
>> +       pinctrl-names = "default", "sleep";
>> +       pinctrl-1 = <&qup_uart3_sleep>;
>> +       interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
>> +                               <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
>> +
>>         status = "okay";
> 
> Same comments here as for patch #2.
> 

Ok.

> 
>>         bluetooth: bluetooth {
>> @@ -1345,4 +1350,47 @@ ap_spi_fp: &spi10 {
>>                         drive-strength = <2>;
>>                 };
>>         };
>> +
>> +       qup_uart3_sleep: qup-uart3-sleep {
> 
> I believe things in this section are supposed to be sorted
> alphabetically.  Thus "qup..." should be sorted before "trackpad..."

Ok.