[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200911154809.jc72jesrctvmiqtr@skbuf>
Date: Fri, 11 Sep 2020 18:48:09 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next] net: dsa: b53: Configure VLANs while not
filtering
On Thu, Sep 10, 2020 at 09:19:05PM -0700, Florian Fainelli wrote:
> Update the B53 driver to support VLANs while not filtering. This
> requires us to enable VLAN globally within the switch upon driver
> initial configuration (dev->vlan_enabled).
>
> We also need to remove the code that dealt with PVID re-configuration in
> b53_vlan_filtering() since that function worked under the assumption
> that it would only be called to make a bridge VLAN filtering, or not
> filtering, and we would attempt to move the port's PVID accordingly.
>
> Now that VLANs are programmed all the time, even in the case of a
> non-VLAN filtering bridge, we would be programming a default_pvid for
> the bridged switch ports.
>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
Not sure it's worth a lot, but:
Acked-by: Vladimir Oltean <olteanv@...il.com>
> drivers/net/dsa/b53/b53_common.c | 23 ++++-------------------
> 1 file changed, 4 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index 6a5796c32721..46ac8875f870 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -1377,23 +1377,6 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up);
> int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
> {
> struct b53_device *dev = ds->priv;
> - u16 pvid, new_pvid;
> -
> - b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
> - if (!vlan_filtering) {
> - /* Filtering is currently enabled, use the default PVID since
> - * the bridge does not expect tagging anymore
> - */
> - dev->ports[port].pvid = pvid;
> - new_pvid = b53_default_pvid(dev);
> - } else {
> - /* Filtering is currently disabled, restore the previous PVID */
> - new_pvid = dev->ports[port].pvid;
> - }
> -
> - if (pvid != new_pvid)
> - b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
> - new_pvid);
>
> b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
>
> @@ -1444,7 +1427,7 @@ void b53_vlan_add(struct dsa_switch *ds, int port,
> untagged = true;
>
> vl->members |= BIT(port);
> - if (untagged && !dsa_is_cpu_port(ds, port))
> + if (untagged)
> vl->untag |= BIT(port);
> else
> vl->untag &= ~BIT(port);
> @@ -1482,7 +1465,7 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
> if (pvid == vid)
> pvid = b53_default_pvid(dev);
>
> - if (untagged && !dsa_is_cpu_port(ds, port))
> + if (untagged)
> vl->untag &= ~(BIT(port));
>
> b53_set_vlan_entry(dev, vid, vl);
> @@ -2619,6 +2602,8 @@ struct b53_device *b53_switch_alloc(struct device *base,
> dev->priv = priv;
> dev->ops = ops;
> ds->ops = &b53_switch_ops;
> + ds->configure_vlan_while_not_filtering = true;
> + dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
> mutex_init(&dev->reg_mutex);
> mutex_init(&dev->stats_mutex);
>
> --
> 2.25.1
>
Powered by blists - more mailing lists