| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFv8NwJe+Qi7roHRCnQf16YwC-wzPiwPugg=W-wvRrk0MV_v5A@mail.gmail.com>
Date: Sat, 12 Sep 2020 01:14:55 +0800
From: Cheng-yi Chiang <cychiang@...omium.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: linux-kernel <linux-kernel@...r.kernel.org>,
Mark Brown <broonie@...nel.org>,
Taniya Das <tdas@...eaurora.org>,
Rohit kumar <rohitkr@...eaurora.org>,
Banajit Goswami <bgoswami@...eaurora.org>,
Patrick Lai <plai@...eaurora.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Stephan Gerhold <stephan@...hold.net>,
Matthias Brugger <matthias.bgg@...il.com>,
Heiko Stuebner <heiko@...ech.de>,
Doug Anderson <dianders@...omium.org>,
Dylan Reid <dgreid@...omium.org>,
Tzung-Bi Shih <tzungbi@...omium.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
<alsa-devel@...a-project.org>, linux-mediatek@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
Ajit Pandey <ajitp@...eaurora.org>,
Srinivasa Rao Mandadapu <srivasam@...eaurora.org>
Subject: Re: [PATCH v9 3/3] ASoC: qcom: sc7180: Add machine driver for sound
card registration
On Fri, Sep 11, 2020 at 7:05 PM Srinivas Kandagatla
<srinivas.kandagatla@...aro.org> wrote:
>
>
>
> On 11/09/2020 11:22, Cheng-Yi Chiang wrote:
> > From: Ajit Pandey <ajitp@...eaurora.org>
> >
> > Add new driver to register sound card on sc7180 trogdor board and
> > do the required configuration for lpass cpu dai and external codecs
> > connected over MI2S interfaces.
> >
> > Signed-off-by: Ajit Pandey <ajitp@...eaurora.org>
> > Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
> > ---
> > sound/soc/qcom/Kconfig | 12 ++
> > sound/soc/qcom/Makefile | 2 +
> > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 281 insertions(+)
> > create mode 100644 sound/soc/qcom/sc7180.c
> >
> ...
> >
> > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> >
> > #DSP lib
> > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> > new file mode 100644
> > index 000000000000..40bc4fc98842
> > --- /dev/null
> > +++ b/sound/soc/qcom/sc7180.c
> > @@ -0,0 +1,267 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> > +//
> > +// sc7180.c -- ALSA SoC Machine driver for SC7180
> > +
> > +#include <dt-bindings/sound/sc7180-lpass.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <sound/core.h>
> > +#include <sound/jack.h>
> > +#include <sound/pcm.h>
> > +#include <sound/pcm_params.h>
> Do you need this header?
>
Hi Srinivas, thanks for taking a closer look!
I will remove it in v10.
>
> > +#include <sound/soc.h>
> > +#include <uapi/linux/input-event-codes.h>
> > +
> > +#include "../codecs/rt5682.h"
> > +#include "common.h"
> > +#include "lpass.h"
> > +
> > +#define DEFAULT_SAMPLE_RATE_48K 48000
>
> Looks like ^ is Not used!
>
I will remove it in v10.
>
> Overall the driver looks much cleaner now!
>
> Also to make progress on this patch, may be you add define for HDMI with
> a comment!
After discussion with Srinivasa Rao, we plan to use a new name that is
more specific to lpass-sc7180 DP dai:
// This will be defined in include/dt-bindings/sound/sc7180-lpass.h
#define SC7180_LPASS_DP 2
Do you think it is okay ?
Thanks!
>
> Once unused remove, pl feel free to add !
>
> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>
>
> --srini
>
>
> > +#define DEFAULT_MCLK_RATE 19200000
> > +#define RT5682_PLL1_FREQ (48000 * 512)
> > +
> > +struct sc7180_snd_data {
> > + u32 pri_mi2s_clk_count;
> > + struct snd_soc_jack hs_jack;
> > + struct snd_soc_jack hdmi_jack;
> > +};
> > +
> > +static void sc7180_jack_free(struct snd_jack *jack)
> > +{
> > + struct snd_soc_component *component = jack->private_data;
> > +
> > + snd_soc_component_set_jack(component, NULL, NULL);
> > +}
> > +
> > +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + struct snd_soc_component *component = codec_dai->component;
> > + struct snd_jack *jack;
> > + int rval;
> > +
> > + rval = snd_soc_card_jack_new(
> > + card, "Headset Jack",
> > + SND_JACK_HEADSET |
> > + SND_JACK_HEADPHONE |
> > + SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> > + SND_JACK_BTN_2 | SND_JACK_BTN_3,
> > + &pdata->hs_jack, NULL, 0);
> > +
> > + if (rval < 0) {
> > + dev_err(card->dev, "Unable to add Headset Jack\n");
> > + return rval;
> > + }
> > +
> > + jack = pdata->hs_jack.jack;
> > +
> > + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> > + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> > + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> > + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> > +
> > + jack->private_data = component;
> > + jack->private_free = sc7180_jack_free;
> > +
> > + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> > +}
> > +
> > +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + struct snd_soc_component *component = codec_dai->component;
> > + struct snd_jack *jack;
> > + int rval;
> > +
> > + rval = snd_soc_card_jack_new(
> > + card, "HDMI Jack",
> > + SND_JACK_LINEOUT,
> > + &pdata->hdmi_jack, NULL, 0);
> > +
> > + if (rval < 0) {
> > + dev_err(card->dev, "Unable to add HDMI Jack\n");
> > + return rval;
> > + }
> > +
> > + jack = pdata->hdmi_jack.jack;
> > + jack->private_data = component;
> > + jack->private_free = sc7180_jack_free;
> > +
> > + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> > +}
> > +
> > +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + return sc7180_headset_init(rtd);
> > + case MI2S_SECONDARY:
> > + return 0;
> > + case HDMI:
> > + return sc7180_hdmi_init(rtd);
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> > +{
> > + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + int ret;
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + if (++data->pri_mi2s_clk_count == 1) {
> > + snd_soc_dai_set_sysclk(cpu_dai,
> > + LPASS_MCLK0,
> > + DEFAULT_MCLK_RATE,
> > + SNDRV_PCM_STREAM_PLAYBACK);
> > + }
> > +
> > + snd_soc_dai_set_fmt(codec_dai,
> > + SND_SOC_DAIFMT_CBS_CFS |
> > + SND_SOC_DAIFMT_NB_NF |
> > + SND_SOC_DAIFMT_I2S);
> > +
> > + /* Configure PLL1 for codec */
> > + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> > + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> > + if (ret) {
> > + dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Configure sysclk for codec */
> > + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> > + RT5682_PLL1_FREQ,
> > + SND_SOC_CLOCK_IN);
> > + if (ret)
> > + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> > + ret);
> > +
> > + break;
> > + case MI2S_SECONDARY:
> > + break;
> > + case HDMI:
> > + break;
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> > +{
> > + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + if (--data->pri_mi2s_clk_count == 0) {
> > + snd_soc_dai_set_sysclk(cpu_dai,
> > + LPASS_MCLK0,
> > + 0,
> > + SNDRV_PCM_STREAM_PLAYBACK);
> > + }
> > + break;
> > + case MI2S_SECONDARY:
> > + break;
> > + case HDMI:
> > + break;
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + break;
> > + }
> > +}
> > +
> > +static const struct snd_soc_ops sc7180_ops = {
> > + .startup = sc7180_snd_startup,
> > + .shutdown = sc7180_snd_shutdown,
> > +};
> > +
> > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> > + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> > + SND_SOC_DAPM_MIC("Headset Mic", NULL),
> > +};
> > +
> > +static struct snd_soc_card sc7180_card = {
> > + .owner = THIS_MODULE,
> > + .dapm_widgets = sc7180_snd_widgets,
> > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> > +};
> > +
> > +static void sc7180_add_ops(struct snd_soc_card *card)
> > +{
> > + struct snd_soc_dai_link *link;
> > + int i;
> > +
> > + for_each_card_prelinks(card, i, link) {
> > + link->ops = &sc7180_ops;
> > + link->init = sc7180_init;
> > + }
> > +}
> > +
> > +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> > +{
> > + struct snd_soc_card *card = &sc7180_card;
> > + struct sc7180_snd_data *data;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + /* Allocate the private data */
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + card->dev = dev;
> > + snd_soc_card_set_drvdata(card, data);
> > +
> > + ret = qcom_snd_parse_of(card);
> > + if (ret) {
> > + dev_err(dev, "Error parsing OF data\n");
> > + return ret;
> > + }
> > +
> > + sc7180_add_ops(card);
> > +
> > + return devm_snd_soc_register_card(dev, card);
> > +}
> > +
> > +static const struct of_device_id sc7180_snd_device_id[] = {
> > + { .compatible = "qcom,sc7180-sndcard" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> > +
> > +static struct platform_driver sc7180_snd_driver = {
> > + .probe = sc7180_snd_platform_probe,
> > + .driver = {
> > + .name = "msm-snd-sc7180",
> > + .of_match_table = sc7180_snd_device_id,
> > + },
> > +};
> > +module_platform_driver(sc7180_snd_driver);
> > +
> > +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> > +MODULE_LICENSE("GPL v2");
> >
Powered by blists - more mailing lists