[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7hft7kw8b6.fsf@baylibre.com>
Date: Mon, 14 Sep 2020 10:57:01 -0700
From: Kevin Hilman <khilman@...libre.com>
To: Neil Armstrong <narmstrong@...libre.com>, kishon@...com,
balbi@...nel.org, martin.blumenstingl@...glemail.com
Cc: linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Neil Armstrong <narmstrong@...libre.com>,
linux-usb@...r.kernel.org
Subject: Re: [PATCH 0/5] usb: dwc-meson-g12a: Add support for USB on S400 board
Neil Armstrong <narmstrong@...libre.com> writes:
> The Amlogic AXG is close from the GXL Glue but with a single OTG PHY.
minor grammar nit: s/close from/close to/ (also in patches 2 & 3).
Otherwise..
Reviewed-by: Kevin Hilman <khilman@...libre.com>
Kevin
> It needs the same init sequence as GXL & GXM, but it seems it doesn't need
> the host disconnect bit.
>
> The Glue driver reuses the already implemented GXL & GXM work.
>
> The USB2 PHY driver needs a slight tweak to keep the OTG detection working.
>
> Neil Armstrong (5):
> phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
> dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic AXG
> Families USB Glue Bindings
> usb: dwc-meson-g12a: Add support for USB on AXG SoCs
> arm64: dts: meson-axg: add USB nodes
> arm64: dts: meson-axg-s400: enable USB OTG
>
> .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 +++++++-
> .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 10 ++++
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 51 +++++++++++++++++++
> drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 +-
> drivers/usb/dwc3/dwc3-meson-g12a.c | 17 +++++++
> 5 files changed, 101 insertions(+), 2 deletions(-)
>
> --
> 2.22.0
Powered by blists - more mailing lists