| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1600087715-15729-2-git-send-email-sjakhade@cadence.com>
Date: Mon, 14 Sep 2020 14:48:33 +0200
From: Swapnil Jakhade <sjakhade@...ence.com>
To: <airlied@...ux.ie>, <daniel@...ll.ch>,
<Laurent.pinchart@...asonboard.com>, <robh+dt@...nel.org>,
<a.hajda@...sung.com>, <narmstrong@...libre.com>,
<jonas@...boo.se>, <jernej.skrabec@...l.net>,
<dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <mparab@...ence.com>, <sjakhade@...ence.com>,
<yamonkar@...ence.com>, <tomi.valkeinen@...com>, <jsarha@...com>,
<nsekhar@...com>, <praneeth@...com>, <nikhil.nd@...com>
Subject: [PATCH v10 1/3] dt-bindings: drm/bridge: Document Cadence MHDP8546 bridge bindings
From: Yuti Amonkar <yamonkar@...ence.com>
Document the bindings used for the Cadence MHDP8546 DPI/DP bridge in
yaml format.
Signed-off-by: Yuti Amonkar <yamonkar@...ence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@...ence.com>
Reviewed-by: Rob Herring <robh@...nel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
.../display/bridge/cdns,mhdp8546.yaml | 154 ++++++++++++++++++
1 file changed, 154 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
new file mode 100644
index 000000000000..a21a4bfe15cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence MHDP8546 bridge
+
+maintainers:
+ - Swapnil Jakhade <sjakhade@...ence.com>
+ - Yuti Amonkar <yamonkar@...ence.com>
+
+properties:
+ compatible:
+ enum:
+ - cdns,mhdp8546
+ - ti,j721e-mhdp8546
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description:
+ Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+ The AUX and PMA registers are not part of this range, they are instead
+ included in the associated PHY.
+ - description:
+ Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+
+ reg-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: mhdptx
+ - const: j721e-intg
+
+ clocks:
+ maxItems: 1
+ description:
+ DP bridge clock, used by the IP to know how to translate a number of
+ clock cycles into a time (which is used to comply with DP standard timings
+ and delays).
+
+ phys:
+ maxItems: 1
+ description:
+ phandle to the DisplayPort PHY.
+
+ ports:
+ type: object
+ description:
+ Ports as described in Documentation/devicetree/bindings/graph.txt.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@0:
+ type: object
+ description:
+ First input port representing the DP bridge input.
+
+ port@1:
+ type: object
+ description:
+ Second input port representing the DP bridge input.
+
+ port@2:
+ type: object
+ description:
+ Third input port representing the DP bridge input.
+
+ port@3:
+ type: object
+ description:
+ Fourth input port representing the DP bridge input.
+
+ port@4:
+ type: object
+ description:
+ Output port representing the DP bridge output.
+
+ required:
+ - port@0
+ - port@4
+ - '#address-cells'
+ - '#size-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,j721e-mhdp8546
+ then:
+ properties:
+ reg:
+ minItems: 2
+ reg-names:
+ minItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - phys
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mhdp: dp-bridge@...b000000 {
+ compatible = "cdns,mhdp8546";
+ reg = <0xf0 0xfb000000 0x0 0x1000000>;
+ reg-names = "mhdptx";
+ clocks = <&mhdp_clock>;
+ phys = <&dp_phy>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_bridge_input: endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ dp_bridge_output: endpoint {
+ remote-endpoint = <&xxx_dp_connector_input>;
+ };
+ };
+ };
+ };
+ };
+...
--
2.26.1
Powered by blists - more mailing lists