[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200915190606.1744-2-dmurphy@ti.com>
Date: Tue, 15 Sep 2020 14:06:02 -0500
From: Dan Murphy <dmurphy@...com>
To: <lgirdwood@...il.com>, <broonie@...nel.org>, <tiwai@...e.com>,
<robh+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <camel.guo@...s.com>,
<alsa-devel@...a-project.org>, <linux-kernel@...r.kernel.org>,
Dan Murphy <dmurphy@...com>
Subject: [PATCH 2/6] ASoC: tlv320adcx140: Fix BCLK inversion for DSP modes
Fix the BCLK inversion for DSP modes
This is how it is defined by ASoC:
* BCLK:
* - "normal" polarity means signal is available at rising edge of BCLK
* - "inverted" polarity means signal is available at falling edge of BCLK
The adcx140 defines the BCLK edge based on coding type.
The PCM (DSP_A/B) should drive on rising and sample on falling edge, so
from ASoC pov, it is IB_NF. But from the codec pov if it is configured in
DSP mode, then the BCLK should not be inverted, defaults to the coding
standard.
For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising).
>From the codec's pov BCLK should not invert either, as this is the default
for the coding.
So, inversion must take the format into account:
IB_NF + DSP_A/B == the codec bclk inversion should be disabled
NB_NF + DSP_A/B == the codec bclk inversion should be enabled
NB_NF + I2S == the codec bclk inversion should be disabled
Signed-off-by: Dan Murphy <dmurphy@...com>
---
sound/soc/codecs/tlv320adcx140.c | 44 +++++++++++++++++---------------
1 file changed, 23 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index 3909c1cf52be..73d18e8002e4 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -673,7 +673,7 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
u8 iface_reg1 = 0;
u8 iface_reg2 = 0;
int offset = 0;
- int width = adcx140->slot_width;
+ bool inverted_bclk = false;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -689,24 +689,6 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
return -EINVAL;
}
- /* signal polarity */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_IF:
- iface_reg1 |= ADCX140_FSYNCINV_BIT;
- break;
- case SND_SOC_DAIFMT_IB_IF:
- iface_reg1 |= ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- iface_reg1 |= ADCX140_BCLKINV_BIT;
- break;
- case SND_SOC_DAIFMT_NB_NF:
- break;
- default:
- dev_err(component->dev, "Invalid DAI clock signal polarity\n");
- return -EINVAL;
- }
-
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
@@ -716,16 +698,36 @@ static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
iface_reg1 |= ADCX140_LEFT_JUST_BIT;
break;
case SND_SOC_DAIFMT_DSP_A:
- offset += (adcx140->tdm_delay * width + 1);
+ offset = 1;
+ inverted_bclk = true;
break;
case SND_SOC_DAIFMT_DSP_B:
- offset += adcx140->tdm_delay * width;
+ inverted_bclk = true;
break;
default:
dev_err(component->dev, "Invalid DAI interface format\n");
return -EINVAL;
}
+ /* signal polarity */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_IB_NF:
+ case SND_SOC_DAIFMT_IB_IF:
+ inverted_bclk = !inverted_bclk;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface_reg1 |= ADCX140_FSYNCINV_BIT;
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ default:
+ dev_err(component->dev, "Invalid DAI clock signal polarity\n");
+ return -EINVAL;
+ }
+
+ if (inverted_bclk)
+ iface_reg1 |= ADCX140_BCLKINV_BIT;
+
adcx140->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
adcx140_pwr_ctrl(adcx140, false);
--
2.28.0
Powered by blists - more mailing lists