linux-kernel - [PATCH 4.19 61/78] drm/tve200: Stabilize enable/disable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200915140636.627659051@linuxfoundation.org>
Date:   Tue, 15 Sep 2020 16:13:26 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
        Daniel Vetter <daniel.vetter@...ll.ch>
Subject: [PATCH 4.19 61/78] drm/tve200: Stabilize enable/disable

From: Linus Walleij <linus.walleij@...aro.org>

commit f71800228dc74711c3df43854ce7089562a3bc2d upstream.

The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.

This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.

This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.

Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Daniel Vetter <daniel.vetter@...ll.ch>
Cc: stable@...r.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/gpu/drm/tve200/tve200_display.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/tve200/tve200_display.c
+++ b/drivers/gpu/drm/tve200/tve200_display.c
@@ -17,6 +17,7 @@
 #include <linux/version.h>
 #include <linux/dma-buf.h>
 #include <linux/of_graph.h>
+#include <linux/delay.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_panel.h>
@@ -132,9 +133,25 @@ static void tve200_display_enable(struct
 	struct drm_connector *connector = priv->connector;
 	u32 format = fb->format->format;
 	u32 ctrl1 = 0;
+	int retries;
 
 	clk_prepare_enable(priv->clk);
 
+	/* Reset the TVE200 and wait for it to come back online */
+	writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4);
+	for (retries = 0; retries < 5; retries++) {
+		usleep_range(30000, 50000);
+		if (readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET)
+			continue;
+		else
+			break;
+	}
+	if (retries == 5 &&
+	    readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) {
+		dev_err(drm->dev, "can't get hardware out of reset\n");
+		return;
+	}
+
 	/* Function 1 */
 	ctrl1 |= TVE200_CTRL_CSMODE;
 	/* Interlace mode for CCIR656: parameterize? */
@@ -231,8 +248,9 @@ static void tve200_display_disable(struc
 
 	drm_crtc_vblank_off(crtc);
 
-	/* Disable and Power Down */
+	/* Disable put into reset and Power Down */
 	writel(0, priv->regs + TVE200_CTRL);
+	writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4);
 
 	clk_disable_unprepare(priv->clk);
 }
@@ -280,6 +298,8 @@ static int tve200_display_enable_vblank(
 	struct drm_device *drm = crtc->dev;
 	struct tve200_drm_dev_private *priv = drm->dev_private;
 
+	/* Clear any IRQs and enable */
+	writel(0xFF, priv->regs + TVE200_INT_CLR);
 	writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN);
 	return 0;
 }