| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200915072423.18437-5-manivannan.sadhasivam@linaro.org>
Date: Tue, 15 Sep 2020 12:54:22 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: rjw@...ysocki.net, viresh.kumar@...aro.org, robh+dt@...nel.org,
agross@...nel.org, bjorn.andersson@...aro.org
Cc: amitk@...nel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, dmitry.baryshkov@...aro.org,
tdas@...eaurora.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v2 4/5] cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
For preparing the driver to handle further SoC revisions, let's use the
of_device_get_match_data() API for getting the device specific offsets
and row size instead of defining them globally.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 89 ++++++++++++++++++++-----------
1 file changed, 59 insertions(+), 30 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 8a303783927f..e3c46984a037 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -19,15 +19,21 @@
#define LUT_L_VAL GENMASK(7, 0)
#define LUT_CORE_COUNT GENMASK(18, 16)
#define LUT_VOLT GENMASK(11, 0)
-#define LUT_ROW_SIZE 32
#define CLK_HW_DIV 2
#define LUT_TURBO_IND 1
-/* Register offsets */
-#define REG_ENABLE 0x0
-#define REG_FREQ_LUT 0x110
-#define REG_VOLT_LUT 0x114
-#define REG_PERF_STATE 0x920
+struct qcom_cpufreq_soc_data {
+ u32 reg_enable;
+ u32 reg_freq_lut;
+ u32 reg_volt_lut;
+ u32 reg_perf_state;
+ u8 lut_row_size;
+};
+
+struct qcom_cpufreq_data {
+ void __iomem *base;
+ const struct qcom_cpufreq_soc_data *soc_data;
+};
static unsigned long cpu_hw_rate, xo_rate;
static bool icc_scaling_enabled;
@@ -76,10 +82,11 @@ static int qcom_cpufreq_update_opp(struct device *cpu_dev,
static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
unsigned int index)
{
- void __iomem *perf_state_reg = policy->driver_data;
+ struct qcom_cpufreq_data *data = policy->driver_data;
+ const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
unsigned long freq = policy->freq_table[index].frequency;
- writel_relaxed(index, perf_state_reg);
+ writel_relaxed(index, data->base + soc_data->reg_perf_state);
if (icc_scaling_enabled)
qcom_cpufreq_set_bw(policy, freq);
@@ -91,7 +98,8 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
{
- void __iomem *perf_state_reg;
+ struct qcom_cpufreq_data *data;
+ const struct qcom_cpufreq_soc_data *soc_data;
struct cpufreq_policy *policy;
unsigned int index;
@@ -99,9 +107,10 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
if (!policy)
return 0;
- perf_state_reg = policy->driver_data;
+ data = policy->driver_data;
+ soc_data = data->soc_data;
- index = readl_relaxed(perf_state_reg);
+ index = readl_relaxed(data->base + soc_data->reg_perf_state);
index = min(index, LUT_MAX_ENTRIES - 1);
return policy->freq_table[index].frequency;
@@ -110,12 +119,13 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
unsigned int target_freq)
{
- void __iomem *perf_state_reg = policy->driver_data;
+ struct qcom_cpufreq_data *data = policy->driver_data;
+ const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
unsigned int index;
unsigned long freq;
index = policy->cached_resolved_idx;
- writel_relaxed(index, perf_state_reg);
+ writel_relaxed(index, data->base + soc_data->reg_perf_state);
freq = policy->freq_table[index].frequency;
arch_set_freq_scale(policy->related_cpus, freq,
@@ -125,8 +135,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
}
static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
- struct cpufreq_policy *policy,
- void __iomem *base)
+ struct cpufreq_policy *policy)
{
u32 data, src, lval, i, core_count, prev_freq = 0, freq;
u32 volt;
@@ -134,6 +143,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
struct dev_pm_opp *opp;
unsigned long rate;
int ret;
+ struct qcom_cpufreq_data *drv_data = policy->driver_data;
+ const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data;
table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
if (!table)
@@ -160,14 +171,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
}
for (i = 0; i < LUT_MAX_ENTRIES; i++) {
- data = readl_relaxed(base + REG_FREQ_LUT +
- i * LUT_ROW_SIZE);
+ data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
+ i * soc_data->lut_row_size);
src = FIELD_GET(LUT_SRC, data);
lval = FIELD_GET(LUT_L_VAL, data);
core_count = FIELD_GET(LUT_CORE_COUNT, data);
- data = readl_relaxed(base + REG_VOLT_LUT +
- i * LUT_ROW_SIZE);
+ data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
+ i * soc_data->lut_row_size);
volt = FIELD_GET(LUT_VOLT, data) * 1000;
if (src)
@@ -237,6 +248,20 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
}
}
+static const struct qcom_cpufreq_soc_data qcom_soc_data = {
+ .reg_enable = 0x0,
+ .reg_freq_lut = 0x110,
+ .reg_volt_lut = 0x114,
+ .reg_perf_state = 0x920,
+ .lut_row_size = 32,
+};
+
+static const struct of_device_id qcom_cpufreq_hw_match[] = {
+ { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
+
static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
{
struct platform_device *pdev = cpufreq_get_driver_data();
@@ -245,6 +270,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
struct device_node *cpu_np;
struct device *cpu_dev;
void __iomem *base;
+ struct qcom_cpufreq_data *data;
int ret, index;
cpu_dev = get_cpu_device(policy->cpu);
@@ -270,8 +296,17 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
if (IS_ERR(base))
return PTR_ERR(base);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ data->soc_data = of_device_get_match_data(&pdev->dev);
+ data->base = base;
+
/* HW should be in enabled state to proceed */
- if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) {
+ if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
ret = -ENODEV;
goto error;
@@ -284,9 +319,9 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
goto error;
}
- policy->driver_data = base + REG_PERF_STATE;
+ policy->driver_data = data;
- ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base);
+ ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
if (ret) {
dev_err(dev, "Domain-%d failed to read LUT\n", index);
goto error;
@@ -310,13 +345,13 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
{
struct device *cpu_dev = get_cpu_device(policy->cpu);
- void __iomem *base = policy->driver_data - REG_PERF_STATE;
+ struct qcom_cpufreq_data *data = policy->driver_data;
struct platform_device *pdev = cpufreq_get_driver_data();
dev_pm_opp_remove_all_dynamic(cpu_dev);
dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
kfree(policy->freq_table);
- devm_iounmap(&pdev->dev, base);
+ devm_iounmap(&pdev->dev, data->base);
return 0;
}
@@ -386,12 +421,6 @@ static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
}
-static const struct of_device_id qcom_cpufreq_hw_match[] = {
- { .compatible = "qcom,cpufreq-hw" },
- {}
-};
-MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
-
static struct platform_driver qcom_cpufreq_hw_driver = {
.probe = qcom_cpufreq_hw_driver_probe,
.remove = qcom_cpufreq_hw_driver_remove,
--
2.17.1
Powered by blists - more mailing lists