[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200916124418.833-10-p.yadav@ti.com>
Date: Wed, 16 Sep 2020 18:14:12 +0530
From: Pratyush Yadav <p.yadav@...com>
To: Tudor Ambarus <tudor.ambarus@...rochip.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
<linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC: Pratyush Yadav <p.yadav@...com>, Sekhar Nori <nsekhar@...com>,
Boris Brezillon <boris.brezillon@...labora.com>
Subject: [PATCH v13 09/15] mtd: spi-nor: core: enable octal DTR mode when possible
Allow flashes to specify a hook to enable octal DTR mode. Use this hook
whenever possible to get optimal transfer speeds.
Signed-off-by: Pratyush Yadav <p.yadav@...com>
---
drivers/mtd/spi-nor/core.c | 35 +++++++++++++++++++++++++++++++++++
drivers/mtd/spi-nor/core.h | 2 ++
2 files changed, 37 insertions(+)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 87c568debf14..6ee93544d72f 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3069,6 +3069,35 @@ static int spi_nor_init_params(struct spi_nor *nor)
return 0;
}
+/** spi_nor_octal_dtr_enable() - enable Octal DTR I/O if needed
+ * @nor: pointer to a 'struct spi_nor'
+ * @enable: whether to enable or disable Octal DTR
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ if (!nor->params->octal_dtr_enable)
+ return 0;
+
+ if (!(nor->read_proto == SNOR_PROTO_8_8_8_DTR &&
+ nor->write_proto == SNOR_PROTO_8_8_8_DTR))
+ return 0;
+
+ ret = nor->params->octal_dtr_enable(nor, enable);
+ if (ret)
+ return ret;
+
+ if (enable)
+ nor->reg_proto = SNOR_PROTO_8_8_8_DTR;
+ else
+ nor->reg_proto = SNOR_PROTO_1_1_1;
+
+ return 0;
+}
+
/**
* spi_nor_quad_enable() - enable/disable Quad I/O if needed.
* @nor: pointer to a 'struct spi_nor'
@@ -3109,6 +3138,12 @@ static int spi_nor_init(struct spi_nor *nor)
{
int err;
+ err = spi_nor_octal_dtr_enable(nor, true);
+ if (err) {
+ dev_dbg(nor->dev, "octal mode not supported\n");
+ return err;
+ }
+
err = spi_nor_quad_enable(nor, true);
if (err) {
dev_dbg(nor->dev, "quad mode not supported\n");
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 42ec7692d8e7..fcb5f071ebed 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -203,6 +203,7 @@ struct spi_nor_locking_ops {
* higher index in the array, the higher priority.
* @erase_map: the erase map parsed from the SFDP Sector Map Parameter
* Table.
+ * @octal_dtr_enable: enables SPI NOR octal DTR mode.
* @quad_enable: enables/disables SPI NOR Quad mode.
* @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
* @convert_addr: converts an absolute address into something the flash
@@ -226,6 +227,7 @@ struct spi_nor_flash_parameter {
struct spi_nor_erase_map erase_map;
+ int (*octal_dtr_enable)(struct spi_nor *nor, bool enable);
int (*quad_enable)(struct spi_nor *nor, bool enable);
int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
--
2.28.0
Powered by blists - more mailing lists