[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200916125554.195749-1-tmaimon77@gmail.com>
Date: Wed, 16 Sep 2020 15:55:51 +0300
From: Tomer Maimon <tmaimon77@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com, avifishman70@...il.com,
tali.perry1@...il.com, venture@...gle.com, yuenn@...gle.com,
benjaminfair@...gle.com, joel@....id.au
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, tmaimon77@...il.com
Subject: [PATCH v5 0/3] arm: dts: add and modify device node in NPCM7xx device tree
This patch set adds and modify device tree nodes in the NPCM7xx
Baseboard Management Controller (BMC) device tree.
The following device node add:
- NPCM7xx Pin controller and GPIO
- NPCM7xx PWM and FAN.
- NPCM7xx EHCI USB.
- NPCM7xx KCS.
- NPCM Reset.
- NPCM Peripheral SPI.
- NPCM FIU SPI.
- NPCM HWRNG.
- NPCM I2C.
- STMicro STMMAC.
The following device node modified:
- NPCM7xx timer.
- NPCM7xx clock constants parameters.
NPCM7xx device tree tested on NPCM750 evaluation board.
Changes since version 4:
- Tested patches in Linux kernel 5.9.
Changes since version 3:
- Tested patches in Linux kernel 5.6.
Changes since version 2:
- Remove unnecessary output-enable flags.
Changes since version 1:
- Add NPCM reset device node.
- Add reset parameters to NPCM driver device nodes.
Tomer Maimon (3):
arm: dts: modify NPCM7xx device tree clock parameter
arm: dts: modify NPCM7xx device tree timer register size
arm: dts: add new device nodes to NPCM750 device tree
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 974 +++++++++++++++++-
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 404 +++++++-
.../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi | 157 +++
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 24 +-
4 files changed, 1522 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
--
2.22.0
Powered by blists - more mailing lists