lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200916230150.14516-1-unixbhaskar@gmail.com>
Date:   Thu, 17 Sep 2020 04:31:50 +0530
From:   Bhaskar Chowdhury <unixbhaskar@...il.com>
To:     b.zolnierkie@...sung.com, linux-fbdev@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     corbet@....net, rdunlap@...radead.org, gregkh@...uxfoundation.org,
        daniel@...ll.ch, yuanmingbuaa@...il.com, w@....eu,
        nopitydays@...il.com, zhangyunhai@...ocus.com, luto@...capital.net,
        torvalds@...ux-foundation.org,
        Bhaskar Chowdhury <unixbhaskar@...il.com>
Subject: [PATCH v3] docs: fb: Remove framebuffer scrollback boot option

This patch remove reference to this option in this document and 
renumbered the sections. This is related to below commits.

Commit 973c096f6a85(vgacon: remove software scrollback support)
Commit 50145474f6ef(fbcon: remove soft scrollback code)
 

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@...il.com>
---
This version try to correct the previous errors, proper changelog text, subject
Trying to incorporate Willy's & Greg's suggestions
 
 Documentation/fb/fbcon.rst | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index e57a3d1d085a..328f6980698c 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -87,15 +87,8 @@ C. Boot options
 	Note, not all drivers can handle font with widths not divisible by 8,
 	such as vga16fb.
 
-2. fbcon=scrollback:<value>[k]
 
-	The scrollback buffer is memory that is used to preserve display
-	contents that has already scrolled past your view.  This is accessed
-	by using the Shift-PageUp key combination.  The value 'value' is any
-	integer. It defaults to 32KB.  The 'k' suffix is optional, and will
-	multiply the 'value' by 1024.
-
-3. fbcon=map:<0123>
+2. fbcon=map:<0123>
 
 	This is an interesting option. It tells which driver gets mapped to
 	which console. The value '0123' is a sequence that gets repeated until
@@ -116,7 +109,7 @@ C. Boot options
 	Later on, when you want to map the console the to the framebuffer
 	device, you can use the con2fbmap utility.
 
-4. fbcon=vc:<n1>-<n2>
+3. fbcon=vc:<n1>-<n2>
 
 	This option tells fbcon to take over only a range of consoles as
 	specified by the values 'n1' and 'n2'. The rest of the consoles
@@ -127,7 +120,7 @@ C. Boot options
 	is typically located on the same video card.  Thus, the consoles that
 	are controlled by the VGA console will be garbled.
 
-5. fbcon=rotate:<n>
+4. fbcon=rotate:<n>
 
 	This option changes the orientation angle of the console display. The
 	value 'n' accepts the following:
@@ -152,21 +145,21 @@ C. Boot options
 	Actually, the underlying fb driver is totally ignorant of console
 	rotation.
 
-6. fbcon=margin:<color>
+5. fbcon=margin:<color>
 
 	This option specifies the color of the margins. The margins are the
 	leftover area at the right and the bottom of the screen that are not
 	used by text. By default, this area will be black. The 'color' value
 	is an integer number that depends on the framebuffer driver being used.
 
-7. fbcon=nodefer
+6. fbcon=nodefer
 
 	If the kernel is compiled with deferred fbcon takeover support, normally
 	the framebuffer contents, left in place by the firmware/bootloader, will
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
-8. fbcon=logo-pos:<location>
+7. fbcon=logo-pos:<location>
 
 	The only possible 'location' is 'center' (without quotes), and when
 	given, the bootup logo is moved from the default top-left corner
@@ -174,7 +167,7 @@ C. Boot options
 	displayed due to multiple CPUs, the collected line of logos is moved
 	as a whole.
 
-9. fbcon=logo-count:<n>
+8. fbcon=logo-count:<n>
 
 	The value 'n' overrides the number of bootup logos. 0 disables the
 	logo, and -1 gives the default which is the number of online CPUs.
-- 
2.28.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ