linux-kernel - [PATCH v2 2/4] arm64: dts: imx8mm: correct interrupt flags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200917185449.5687-2-krzk@kernel.org>
Date:   Thu, 17 Sep 2020 20:54:47 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Adam Ford <aford173@...il.com>,
        Daniel Baluta <daniel.baluta@....com>,
        Anson Huang <Anson.Huang@....com>,
        Jacky Bai <ping.bai@....com>, Robin Gong <yibin.gong@....com>,
        Peter Chen <peter.chen@....com>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH v2 2/4] arm64: dts: imx8mm: correct interrupt flags

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

In case of level low interrupts, enable also internal pull up.  It is
required at least on imx8mm-evk, according to schematics.

The schematics for Variscite imx8mm-var-som are not available and
I was unable to get proper configuration from Variscite.

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>

---

Changes since v1:
1. Correct title.
2. Enable pull ups.
---
 arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi      | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi             | 4 ++--
 arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi         | 6 +++++-
 4 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 502faf6144b0..6de86a4f0ec4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -74,7 +74,7 @@
 		reg = <0x4b>;
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <3 GPIO_ACTIVE_LOW>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
 		regulators {
@@ -292,7 +292,7 @@
 
 		pinctrl_pmic: pmicirqgrp {
 			fsl,pins = <
-				MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+				MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
 			>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index f572b7d207f4..f305a530ff6f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -123,7 +123,7 @@
 		reg = <0x4b>;
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <3 GPIO_ACTIVE_LOW>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
@@ -392,7 +392,7 @@
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index 67ceda14d648..a56f602ba0a3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -134,7 +134,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_captouch>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <4 GPIO_ACTIVE_HIGH>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 9c6e91243ba0..4107fe914d08 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -137,7 +137,11 @@
 		reg = <0x4b>;
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <8 GPIO_ACTIVE_LOW>;
+		/*
+		 * The interrupt is not correct. It should be level low,
+		 * however with internal pull up this causes IRQ storm.
+		 */
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
-- 
2.17.1