| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200917194341.16272-5-ben.levinsky@xilinx.com>
Date: Thu, 17 Sep 2020 12:43:40 -0700
From: Ben Levinsky <ben.levinsky@...inx.com>
To: punit1.agrawal@...hiba.co.jp, stefanos@...inx.com,
michals@...inx.com, michael.auchter@...com
Cc: devicetree@...r.kernel.org, mathieu.poirier@...aro.org,
emooring@...inx.com, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, jliang@...inx.com,
robh+dt@...nel.org, linux-arm-kernel@...ts.infradead.org,
Jason Wu <j.wu@...inx.com>,
Michal Simek <michal.simek@...inx.com>
Subject: [PATCH v14 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings
Add binding for ZynqMP R5 OpenAMP.
Represent the RPU domain resources in one device node. Each RPU
processor is a subnode of the top RPU domain node.
Signed-off-by: Jason Wu <j.wu@...inx.com>
Signed-off-by: Wendy Liang <jliang@...inx.com>
Signed-off-by: Michal Simek <michal.simek@...inx.com>
Signed-off-by: Ben Levinsky <ben.levinsky@...inx.com>
---
v3:
- update zynqmp_r5 yaml parsing to not raise warnings for extra
information in children of R5 node. The warning "node has a unit
name, but no reg or ranges property" will still be raised though
as this particular node is needed to describe the
'#address-cells' and '#size-cells' information.
v4::
- remove warning '/example-0/rpu@...a0000/r5@0:
node has a unit name, but no reg or ranges property'
by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
v6:
- remove coupling TCM nodes with remoteproc
- remove mailbox as it is optional not needed
v7:
- change lockstep-mode to xlnx,cluster-mode
v9:
- show example IPC nodes and tcm bank nodes
v11:
- add property meta-memory-regions to illustrate link
between r5 and TCM banks
- update so no warnings from 'make dt_binding_check'
v14:
- concerns were raised about the new property meta-memory-regions.
There is no clear direction so for the moment I kept it in the series
- place IPC nodes in RAM in the reserved memory section
---
.../xilinx,zynqmp-r5-remoteproc.yaml | 119 ++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
new file mode 100644
index 000000000000..cd2406b4dc24
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx R5 remote processor controller bindings
+
+description:
+ This document defines the binding for the remoteproc component that loads and
+ boots firmwares on the Xilinx Zynqmp and Versal family chipset.
+
+ Note that the Linux has global addressing view of the R5-related memory (TCM)
+ so the absolute address ranges are provided in TCM reg's.
+maintainers:
+ - Ed Mooring <ed.mooring@...inx.com>
+ - Ben Levinsky <ben.levinsky@...inx.com>
+
+properties:
+ compatible:
+ const: "xlnx,zynqmp-r5-remoteproc-1.0"
+
+ lockstep-mode:
+ description:
+ R5 core configuration (split is 0 or lock-step and 1)
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt mapping for remoteproc IPI. It is required if the
+ user uses the remoteproc driver with the RPMsg kernel driver.
+ maxItems: 6
+
+ memory-region:
+ description:
+ collection of memory carveouts used for elf-loading and inter-processor
+ communication.
+ maxItems: 4
+ minItems: 4
+ meta-memory-regions:
+ description:
+ collection of memories that are not present in the top level memory
+ nodes' mapping. For example, R5s' TCM banks. These banks are needed
+ for R5 firmware meta data such as the R5 firmware's heap and stack
+ pnode-id:
+ maxItems: 1
+ mboxes:
+ maxItems: 2
+ mbox-names:
+ maxItems: 2
+
+examples:
+ - |
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ elf_load: rproc@...000000 {
+ no-map;
+ reg = <0x3ed00000 0x40000>;
+ };
+
+ rpu0vdev0vring0: rpu0vdev0vring0@...40000 {
+ no-map;
+ reg = <0x3ed40000 0x4000>;
+ };
+ rpu0vdev0vring1: rpu0vdev0vring1@...44000 {
+ no-map;
+ reg = <0x3ed44000 0x4000>;
+ };
+ rpu0vdev0buffer: rpu0vdev0buffer@...48000 {
+ no-map;
+ reg = <0x3ed48000 0x100000>;
+ };
+
+ };
+
+ /*
+ * Below nodes are required if using TCM to load R5 firmware
+ * if not, then either do not provide nodes are label as disabled in
+ * status property
+ */
+ tcm0a: tcm_0a@...00000 {
+ reg = <0xffe00000 0x10000>;
+ pnode-id = <0xf>;
+ no-map;
+ status = "okay";
+ phandle = <0x40>;
+ compatible = "xlnx,tcm";
+ };
+ tcm0b: tcm_1a@...20000 {
+ reg = <0xffe20000 0x10000>;
+ pnode-id = <0x10>;
+ no-map;
+ status = "okay";
+ compatible = "xlnx,tcm";
+ phandle = <0x41>;
+ };
+
+ rpu {
+ compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ lockstep-mode = <1>;
+ r5_0 {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ memory-region = <&elf_load>,
+ <&rpu0vdev0vring0>,
+ <&rpu0vdev0vring1>,
+ <&rpu0vdev0buffer>;
+ meta-memory-regions = <&tcm_0a>, <&tcm_0b>;
+ pnode-id = <0x7>;
+ };
+ };
+
+...
--
2.17.1
Powered by blists - more mailing lists