| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACO55tuqtMBOQAt1=W1pN9DbE6EnMqM-gwz=1dSqhf+yu1QuNg@mail.gmail.com>
Date: Thu, 17 Sep 2020 16:23:53 +0200
From: Karol Herbst <kherbst@...hat.com>
To: Jeremy Cline <jcline@...hat.com>
Cc: Ben Skeggs <bskeggs@...hat.com>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
dri-devel <dri-devel@...ts.freedesktop.org>,
nouveau <nouveau@...ts.freedesktop.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] drm/nouveau: return temperatures in temp_get() via parameter
On Thu, Sep 17, 2020 at 4:11 PM Jeremy Cline <jcline@...hat.com> wrote:
>
> On Wed, Sep 16, 2020 at 10:03:22PM +0200, Karol Herbst wrote:
> > On Wed, Sep 16, 2020 at 10:01 PM Karol Herbst <kherbst@...hat.com> wrote:
> > >
> > > On Wed, Sep 16, 2020 at 9:47 PM Jeremy Cline <jcline@...hat.com> wrote:
> > > >
> > > > The temp_get() function currently returns negative error numbers or a
> > > > temperature. However, the thermal sensors can (in theory) measure
> > > > negative temperatures. Some implementations of temp_get() correctly
> > > > clamp negative temperature readings to 0 so that users do not mistake
> > > > them for errors, but some, like gp100_temp_get(), do not.
> > > >
> > > > Rather than relying on implementations remembering to clamp values,
> > > > dedicate the function return value to error codes and accept a pointer
> > > > to an integer where the temperature reading should be stored.
> > > >
> > > > Signed-off-by: Jeremy Cline <jcline@...hat.com>
> > > > ---
> > > > .../drm/nouveau/include/nvkm/subdev/therm.h | 2 +-
> > > > drivers/gpu/drm/nouveau/nouveau_hwmon.c | 12 ++++++------
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/base.c | 19 ++++++++++++++-----
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/g84.c | 11 ++++++-----
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/gp100.c | 11 ++++++-----
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/nv40.c | 9 +++------
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/nv50.c | 9 +++------
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/priv.h | 17 +++++++++++++++--
> > > > .../gpu/drm/nouveau/nvkm/subdev/therm/temp.c | 12 ++++++++----
> > > > 9 files changed, 62 insertions(+), 40 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/therm.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/therm.h
> > > > index 62c34f98c930..bfe9779216fc 100644
> > > > --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/therm.h
> > > > +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/therm.h
> > > > @@ -99,7 +99,7 @@ struct nvkm_therm {
> > > > bool clkgating_enabled;
> > > > };
> > > >
> > > > -int nvkm_therm_temp_get(struct nvkm_therm *);
> > > > +int nvkm_therm_temp_get(struct nvkm_therm *therm, int *temp);
> > > > int nvkm_therm_fan_sense(struct nvkm_therm *);
> > > > int nvkm_therm_cstate(struct nvkm_therm *, int, int);
> > > > void nvkm_therm_clkgate_init(struct nvkm_therm *,
> > > > diff --git a/drivers/gpu/drm/nouveau/nouveau_hwmon.c b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
> > > > index 1c3104d20571..aff6aa296678 100644
> > > > --- a/drivers/gpu/drm/nouveau/nouveau_hwmon.c
> > > > +++ b/drivers/gpu/drm/nouveau/nouveau_hwmon.c
> > > > @@ -325,7 +325,7 @@ nouveau_temp_is_visible(const void *data, u32 attr, int channel)
> > > > struct nouveau_drm *drm = nouveau_drm((struct drm_device *)data);
> > > > struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
> > > >
> > > > - if (!therm || !therm->attr_get || nvkm_therm_temp_get(therm) < 0)
> > > > + if (!therm || !therm->attr_get || nvkm_therm_temp_get(therm, NULL) < 0)
> > > > return 0;
> > > >
> > > > switch (attr) {
> > > > @@ -419,7 +419,7 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
> > > > struct drm_device *drm_dev = dev_get_drvdata(dev);
> > > > struct nouveau_drm *drm = nouveau_drm(drm_dev);
> > > > struct nvkm_therm *therm = nvxx_therm(&drm->client.device);
> > > > - int ret;
> > > > + int ret = 0, temp;
> > > >
> > > > if (!therm || !therm->attr_get)
> > > > return -EOPNOTSUPP;
> > > > @@ -428,8 +428,8 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
> > > > case hwmon_temp_input:
> > > > if (drm_dev->switch_power_state != DRM_SWITCH_POWER_ON)
> > > > return -EINVAL;
> > > > - ret = nvkm_therm_temp_get(therm);
> > > > - *val = ret < 0 ? ret : (ret * 1000);
> > > > + ret = nvkm_therm_temp_get(therm, &temp);
> > > > + *val = temp * 1000;
> > > > break;
> > > > case hwmon_temp_max:
> > > > *val = therm->attr_get(therm, NVKM_THERM_ATTR_THRS_DOWN_CLK)
> > > > @@ -459,7 +459,7 @@ nouveau_temp_read(struct device *dev, u32 attr, int channel, long *val)
> > > > return -EOPNOTSUPP;
> > > > }
> > > >
> > > > - return 0;
> > > > + return ret;
> > > > }
> > > >
> > > > static int
> > > > @@ -735,7 +735,7 @@ nouveau_hwmon_init(struct drm_device *dev)
> > > > hwmon->dev = dev;
> > > >
> > > > if (therm && therm->attr_get && therm->attr_set) {
> > > > - if (nvkm_therm_temp_get(therm) >= 0)
> > > > + if (nvkm_therm_temp_get(therm, NULL) >= 0)
> > > > special_groups[i++] = &temp1_auto_point_sensor_group;
> > > > if (therm->fan_get && therm->fan_get(therm) >= 0)
> > > > special_groups[i++] = &pwm_fan_sensor_group;
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
> > > > index 4a4d1e224126..e7ffea1512e6 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
> > > > @@ -27,10 +27,15 @@
> > > > #include <subdev/pmu.h>
> > > >
> > > > int
> > > > -nvkm_therm_temp_get(struct nvkm_therm *therm)
> > > > +nvkm_therm_temp_get(struct nvkm_therm *therm, int *temp)
> > > > {
> > > > + int ignored_reading;
> > > > +
> > > > + if (temp == NULL)
> > > > + temp = &ignored_reading;
> > > > +
> > > > if (therm->func->temp_get)
> > > > - return therm->func->temp_get(therm);
> > > > + return therm->func->temp_get(therm, temp);
> > > > return -ENODEV;
> > > > }
> > > >
> > > > @@ -40,9 +45,11 @@ nvkm_therm_update_trip(struct nvkm_therm *therm)
> > > > struct nvbios_therm_trip_point *trip = therm->fan->bios.trip,
> > > > *cur_trip = NULL,
> > > > *last_trip = therm->last_trip;
> > > > - u8 temp = therm->func->temp_get(therm);
> > > > + int temp;
> > > > u16 duty, i;
> > > >
> > > > + WARN_ON(nvkm_therm_temp_get(therm, &temp) < 0);
> > > > +
> > >
> > > I think adding WARN_ONs like this is fine, I am just not sure how much
> > > our code is actually protected against the GPU being runtime
> > > suspended... so on laptops this could trigger some warnings.. might
> > > even be just because nouveau_pmops_runtime_suspend and the hwmon API
> > > race here, even though it's quite unlikely that the hwmon thread
> > > stalls enough so it survives the entire suspend path. But in theory
> > > that could be causing random errors getting reported.
> > >
> >
> > Actually, we never set the status to DRM_SWITCH_POWER_CHANGING, so I
> > guess this race is indeed real. I thought we did that, but maybe
> > that's because I never send out the patch to use them.
> >
>
> Yeah, so my thinking was that since before there was no error handling
> it would show whether or not it's a real problem, but it sounds like it
> is so I think it'd be better to handle that.
>
yeah.. I guess that issue existed before already although I think we
treated negative values special enough so it never showed? mhh..
anyway, I think we want to set the power state to _CHANGING anyway and
I can send out a patch for that. The other part is to make sure that
the suspend paths are stopping all the relevant kworkers which I'd
assume they do anyway.
> I see nvkm_therm_update() is checking to make sure the duty is positive.
> Should it always be safe to skip setting the fan in cases where the
> temperature isn't readable? If so we can just return the error here.
>
I think the fan workers should be stopped once the GPU runtime
suspends, but I am not 100% on this, so we might want to check up on
that.
> > > > /* look for the trip point corresponding to the current temperature */
> > > > cur_trip = NULL;
> > > > for (i = 0; i < therm->fan->bios.nr_fan_trip; i++) {
> > > > @@ -70,9 +77,11 @@ static int
> > > > nvkm_therm_compute_linear_duty(struct nvkm_therm *therm, u8 linear_min_temp,
> > > > u8 linear_max_temp)
> > > > {
> > > > - u8 temp = therm->func->temp_get(therm);
> > > > + int temp;
> > > > u16 duty;
> > > >
> > > > + WARN_ON(nvkm_therm_temp_get(therm, &temp) < 0);
> > > > +
> > > > /* handle the non-linear part first */
> > > > if (temp < linear_min_temp)
> > > > return therm->fan->bios.min_duty;
> > > > @@ -200,7 +209,7 @@ nvkm_therm_fan_mode(struct nvkm_therm *therm, int mode)
> > > > /* do not allow automatic fan management if the thermal sensor is
> > > > * not available */
> > > > if (mode == NVKM_THERM_CTRL_AUTO &&
> > > > - therm->func->temp_get(therm) < 0)
> > > > + nvkm_therm_temp_get(therm, NULL) < 0)
> > > > return -EINVAL;
> > > >
> > > > if (therm->mode == mode)
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/g84.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/g84.c
> > > > index 96f8da40ac82..e2f891d5c7ba 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/g84.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/g84.c
> > > > @@ -27,14 +27,15 @@
> > > > #include <subdev/fuse.h>
> > > >
> > > > int
> > > > -g84_temp_get(struct nvkm_therm *therm)
> > > > +g84_temp_get(struct nvkm_therm *therm, int *temp)
> > > > {
> > > > struct nvkm_device *device = therm->subdev.device;
> > > >
> > > > - if (nvkm_fuse_read(device->fuse, 0x1a8) == 1)
> > > > - return nvkm_rd32(device, 0x20400);
> > > > - else
> > > > + if (nvkm_fuse_read(device->fuse, 0x1a8) != 1)
> > > > return -ENODEV;
> > > > +
> > > > + *temp = nvkm_rd32(device, 0x20400);
> > > > + return 0;
> > > > }
> > > >
> > > > void
> > > > @@ -115,7 +116,7 @@ g84_therm_threshold_hyst_emulation(struct nvkm_therm *therm,
> > > > }
> > > >
> > > > /* fix the state (in case someone reprogrammed the alarms) */
> > > > - cur = therm->func->temp_get(therm);
> > > > + WARN_ON(nvkm_therm_temp_get(therm, &cur) < 0);
> > > > if (new_state == NVKM_THERM_THRS_LOWER && cur > thrs->temp)
> > > > new_state = NVKM_THERM_THRS_HIGHER;
> > > > else if (new_state == NVKM_THERM_THRS_HIGHER &&
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/gp100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/gp100.c
> > > > index 9f0dea3f61dc..4c32e4f21bec 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/gp100.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/gp100.c
> > > > @@ -24,7 +24,7 @@
> > > > #include "priv.h"
> > > >
> > > > static int
> > > > -gp100_temp_get(struct nvkm_therm *therm)
> > > > +gp100_temp_get(struct nvkm_therm *therm, int *temp)
> > > > {
> > > > struct nvkm_device *device = therm->subdev.device;
> > > > struct nvkm_subdev *subdev = &therm->subdev;
> > > > @@ -35,11 +35,12 @@ gp100_temp_get(struct nvkm_therm *therm)
> > > > if (tsensor & 0x40000000)
> > > > nvkm_trace(subdev, "reading temperature from SHADOWed sensor\n");
> > > >
> > > > - /* device valid */
> > > > - if (tsensor & 0x20000000)
> > > > - return (inttemp >> 8);
> > > > - else
> > > > + /* device invalid */
> > > > + if (!(tsensor & 0x20000000))
> > > > return -ENODEV;
> > > > +
> > > > + *temp = inttemp >> 8;
> > > > + return 0;
> > > > }
> > > >
> > > > static const struct nvkm_therm_func
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv40.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv40.c
> > > > index 2c92ffb5f9d0..9753ad4bee4a 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv40.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv40.c
> > > > @@ -70,7 +70,7 @@ nv40_sensor_setup(struct nvkm_therm *therm)
> > > > }
> > > >
> > > > static int
> > > > -nv40_temp_get(struct nvkm_therm *therm)
> > > > +nv40_temp_get(struct nvkm_therm *therm, int *temp)
> > > > {
> > > > struct nvkm_device *device = therm->subdev.device;
> > > > struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
> > > > @@ -95,11 +95,8 @@ nv40_temp_get(struct nvkm_therm *therm)
> > > > core_temp = core_temp + sensor->offset_num / sensor->offset_den;
> > > > core_temp = core_temp + sensor->offset_constant - 8;
> > > >
> > > > - /* reserve negative temperatures for errors */
> > > > - if (core_temp < 0)
> > > > - core_temp = 0;
> > > > -
> > > > - return core_temp;
> > > > + *temp = core_temp;
> > > > + return 0;
> > > > }
> > > >
> > > > static int
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv50.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv50.c
> > > > index 9b57b433d4cf..38fa6777c129 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv50.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/nv50.c
> > > > @@ -126,7 +126,7 @@ nv50_sensor_setup(struct nvkm_therm *therm)
> > > > }
> > > >
> > > > static int
> > > > -nv50_temp_get(struct nvkm_therm *therm)
> > > > +nv50_temp_get(struct nvkm_therm *therm, int *temp)
> > > > {
> > > > struct nvkm_device *device = therm->subdev.device;
> > > > struct nvbios_therm_sensor *sensor = &therm->bios_sensor;
> > > > @@ -143,11 +143,8 @@ nv50_temp_get(struct nvkm_therm *therm)
> > > > core_temp = core_temp + sensor->offset_num / sensor->offset_den;
> > > > core_temp = core_temp + sensor->offset_constant - 8;
> > > >
> > > > - /* reserve negative temperatures for errors */
> > > > - if (core_temp < 0)
> > > > - core_temp = 0;
> > > > -
> > > > - return core_temp;
> > > > + *temp = core_temp;
> > > > + return 0;
> > > > }
> > > >
> > > > static void
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/priv.h
> > > > index 21659daf1864..04607d8b1755 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/priv.h
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/priv.h
> > > > @@ -91,7 +91,15 @@ struct nvkm_therm_func {
> > > > int (*pwm_set)(struct nvkm_therm *, int line, u32, u32);
> > > > int (*pwm_clock)(struct nvkm_therm *, int line);
> > > >
> > > > - int (*temp_get)(struct nvkm_therm *);
> > > > + /**
> > > > + * @temp_get: Get the temperature reading from a thermal device
> > > > + *
> > > > + * @therm: The thermal device instance.
> > > > + * @temp: A pointer to write the temperature reading to.
> > > > + *
> > > > + * Returns: Zero on success, or a negative error code on failure.
> > > > + */
> > > > + int (*temp_get)(struct nvkm_therm *therm, int *temp);
> > > >
> > > > int (*fan_sense)(struct nvkm_therm *);
> > > >
> > > > @@ -110,7 +118,12 @@ int nv50_fan_pwm_get(struct nvkm_therm *, int, u32 *, u32 *);
> > > > int nv50_fan_pwm_set(struct nvkm_therm *, int, u32, u32);
> > > > int nv50_fan_pwm_clock(struct nvkm_therm *, int);
> > > >
> > > > -int g84_temp_get(struct nvkm_therm *);
> > > > +/**
> > > > + * g84_temp_get() - An implementation of the &struct nvkm_therm_func temp_get()
> > > > + * @therm: The thermal device instance.
> > > > + * @temp: A pointer to write the temperature reading to.
> > > > + */
> > > > +int g84_temp_get(struct nvkm_therm *therm, int *temp);
> > > > void g84_sensor_setup(struct nvkm_therm *);
> > > > void g84_therm_fini(struct nvkm_therm *);
> > > >
> > > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/temp.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/temp.c
> > > > index ddb2b2c600ca..1e8803901abc 100644
> > > > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/temp.c
> > > > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/temp.c
> > > > @@ -86,7 +86,9 @@ nvkm_therm_sensor_event(struct nvkm_therm *therm, enum nvkm_therm_thrs thrs,
> > > > static const char * const thresholds[] = {
> > > > "fanboost", "downclock", "critical", "shutdown"
> > > > };
> > > > - int temperature = therm->func->temp_get(therm);
> > > > + int temperature;
> > > > +
> > > > + WARN_ON(nvkm_therm_temp_get(therm, &temperature) < 0);
> > > >
> > > > if (thrs < 0 || thrs > 3)
> > > > return;
> > > > @@ -140,7 +142,9 @@ nvkm_therm_threshold_hyst_polling(struct nvkm_therm *therm,
> > > > {
> > > > enum nvkm_therm_thrs_direction direction;
> > > > enum nvkm_therm_thrs_state prev_state, new_state;
> > > > - int temp = therm->func->temp_get(therm);
> > > > + int temp;
> > > > +
> > > > + WARN_ON(nvkm_therm_temp_get(therm, &temp) < 0);
> > > >
> > > > prev_state = nvkm_therm_sensor_get_threshold_state(therm, thrs_name);
> > > >
> > > > @@ -185,7 +189,7 @@ alarm_timer_callback(struct nvkm_alarm *alarm)
> > > > spin_unlock_irqrestore(&therm->sensor.alarm_program_lock, flags);
> > > >
> > > > /* schedule the next poll in one second */
> > > > - if (therm->func->temp_get(therm) >= 0)
> > > > + if (nvkm_therm_temp_get(therm, NULL) >= 0)
> > > > nvkm_timer_alarm(tmr, 1000000000ULL, alarm);
> > > > }
> > > >
> > > > @@ -229,7 +233,7 @@ nvkm_therm_sensor_preinit(struct nvkm_therm *therm)
> > > > {
> > > > const char *sensor_avail = "yes";
> > > >
> > > > - if (therm->func->temp_get(therm) < 0)
> > > > + if (nvkm_therm_temp_get(therm, NULL) < 0)
> > > > sensor_avail = "no";
> > > >
> > > > nvkm_debug(&therm->subdev, "internal sensor: %s\n", sensor_avail);
> > > > --
> > > > 2.26.2
> > > >
> >
>
Powered by blists - more mailing lists