[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200918153829.14686-4-grygorii.strashko@ti.com>
Date: Fri, 18 Sep 2020 18:38:28 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Tero Kristo <t-kristo@...com>, Rob Herring <robh+dt@...nel.org>,
Nishanth Menon <nm@...com>
CC: Peter Ujfalusi <peter.ujfalusi@...com>,
Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Vignesh Raghavendra <vigneshr@...com>,
Suman Anna <s-anna@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH v3 3/4] arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
Add DT node for The TI j7200 MCU SoC Gigabit Ethernet two ports Switch
subsystem (MCU CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
Tested-by: Kishon Vijay Abraham I <kishon@...com>
---
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 7ecdfdb46436..a994276a8b3d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -34,6 +34,20 @@
};
};
+ mcu_conf: syscon@...00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x40f00000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+ phy_gmii_sel: phy@...0 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4040 0x4>;
+ #phy-cells = <1>;
+ };
+ };
+
chipid@...00014 {
compatible = "ti,am654-chipid";
reg = <0x00 0x43000014 0x00 0x4>;
@@ -136,4 +150,64 @@
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
};
};
+
+ mcu_cpsw: ethernet@...00000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 18 21>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ ti,syscon-efuse = <&mcu_conf 0x200>;
+ phys = <&phy_gmii_sel 1>;
+ };
+ };
+
+ davinci_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x0 0xf00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 18 21>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ };
+
+ cpts@...00 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x3d000 0x0 0x400>;
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
};
--
2.17.1
Powered by blists - more mailing lists