| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200918020110.2063155-3-sashal@kernel.org>
Date: Thu, 17 Sep 2020 21:55:43 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: James Smart <jsmart2021@...il.com>,
Dick Kennedy <dick.kennedy@...adcom.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
Sasha Levin <sashal@...nel.org>, linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 5.4 003/330] scsi: lpfc: Fix pt2pt discovery on SLI3 HBAs
From: James Smart <jsmart2021@...il.com>
[ Upstream commit 359e10f087dbb7b9c9f3035a8cc4391af45bd651 ]
After exchanging PLOGI on an SLI-3 adapter, the PRLI exchange failed. Link
trace showed the port was assigned a non-zero n_port_id, but didn't use the
address on the PRLI. The assigned address is set on the port by the
CONFIG_LINK mailbox command. The driver responded to the PRLI before the
mailbox command completed. Thus the PRLI response used the old n_port_id.
Defer the PRLI response until CONFIG_LINK completes.
Link: https://lore.kernel.org/r/20190922035906.10977-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@...adcom.com>
Signed-off-by: James Smart <jsmart2021@...il.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 141 +++++++++++++++++++++++------
1 file changed, 115 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 6961713825585..2a340624bfc99 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -279,6 +279,55 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
}
+/* lpfc_defer_pt2pt_acc - Complete SLI3 pt2pt processing on link up
+ * @phba: pointer to lpfc hba data structure.
+ * @link_mbox: pointer to CONFIG_LINK mailbox object
+ *
+ * This routine is only called if we are SLI3, direct connect pt2pt
+ * mode and the remote NPort issues the PLOGI after link up.
+ */
+void
+lpfc_defer_pt2pt_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *link_mbox)
+{
+ LPFC_MBOXQ_t *login_mbox;
+ MAILBOX_t *mb = &link_mbox->u.mb;
+ struct lpfc_iocbq *save_iocb;
+ struct lpfc_nodelist *ndlp;
+ int rc;
+
+ ndlp = link_mbox->ctx_ndlp;
+ login_mbox = link_mbox->context3;
+ save_iocb = login_mbox->context3;
+ link_mbox->context3 = NULL;
+ login_mbox->context3 = NULL;
+
+ /* Check for CONFIG_LINK error */
+ if (mb->mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4575 CONFIG_LINK fails pt2pt discovery: %x\n",
+ mb->mbxStatus);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ lpfc_sli_release_iocbq(phba, save_iocb);
+ return;
+ }
+
+ /* Now that CONFIG_LINK completed, and our SID is configured,
+ * we can now proceed with sending the PLOGI ACC.
+ */
+ rc = lpfc_els_rsp_acc(link_mbox->vport, ELS_CMD_PLOGI,
+ save_iocb, ndlp, login_mbox);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4576 PLOGI ACC fails pt2pt discovery: %x\n",
+ rc);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+ }
+
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ lpfc_sli_release_iocbq(phba, save_iocb);
+}
+
static int
lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_iocbq *cmdiocb)
@@ -291,10 +340,12 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
IOCB_t *icmd;
struct serv_parm *sp;
uint32_t ed_tov;
- LPFC_MBOXQ_t *mbox;
+ LPFC_MBOXQ_t *link_mbox;
+ LPFC_MBOXQ_t *login_mbox;
+ struct lpfc_iocbq *save_iocb;
struct ls_rjt stat;
uint32_t vid, flag;
- int rc;
+ int rc, defer_acc;
memset(&stat, 0, sizeof (struct ls_rjt));
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
@@ -343,6 +394,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
else
ndlp->nlp_fcp_info |= CLASS3;
+ defer_acc = 0;
ndlp->nlp_class_sup = 0;
if (sp->cls1.classValid)
ndlp->nlp_class_sup |= FC_COS_CLASS1;
@@ -354,7 +406,6 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_class_sup |= FC_COS_CLASS4;
ndlp->nlp_maxframe =
((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb;
-
/* if already logged in, do implicit logout */
switch (ndlp->nlp_state) {
case NLP_STE_NPR_NODE:
@@ -396,6 +447,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+ login_mbox = NULL;
+ link_mbox = NULL;
+ save_iocb = NULL;
+
/* Check for Nport to NPort pt2pt protocol */
if ((vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -423,17 +478,22 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (phba->sli_rev == LPFC_SLI_REV4)
lpfc_issue_reg_vfi(vport);
else {
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (mbox == NULL)
+ defer_acc = 1;
+ link_mbox = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!link_mbox)
goto out;
- lpfc_config_link(phba, mbox);
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- mempool_free(mbox, phba->mbox_mem_pool);
+ lpfc_config_link(phba, link_mbox);
+ link_mbox->mbox_cmpl = lpfc_defer_pt2pt_acc;
+ link_mbox->vport = vport;
+ link_mbox->ctx_ndlp = ndlp;
+
+ save_iocb = lpfc_sli_get_iocbq(phba);
+ if (!save_iocb)
goto out;
- }
+ /* Save info from cmd IOCB used in rsp */
+ memcpy((uint8_t *)save_iocb, (uint8_t *)cmdiocb,
+ sizeof(struct lpfc_iocbq));
}
lpfc_can_disctmo(vport);
@@ -448,8 +508,8 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_flag |= NLP_SUPPRESS_RSP;
}
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
+ login_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!login_mbox)
goto out;
/* Registering an existing RPI behaves differently for SLI3 vs SLI4 */
@@ -457,21 +517,19 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_unreg_rpi(vport, ndlp);
rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
- (uint8_t *) sp, mbox, ndlp->nlp_rpi);
- if (rc) {
- mempool_free(mbox, phba->mbox_mem_pool);
+ (uint8_t *)sp, login_mbox, ndlp->nlp_rpi);
+ if (rc)
goto out;
- }
/* ACC PLOGI rsp command needs to execute first,
- * queue this mbox command to be processed later.
+ * queue this login_mbox command to be processed later.
*/
- mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
+ login_mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
/*
- * mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox
+ * login_mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox
* command issued in lpfc_cmpl_els_acc().
*/
- mbox->vport = vport;
+ login_mbox->vport = vport;
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI);
spin_unlock_irq(shost->host_lock);
@@ -506,16 +564,47 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD;
stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
- ndlp, mbox);
+ ndlp, login_mbox);
if (rc)
- mempool_free(mbox, phba->mbox_mem_pool);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
return 1;
}
- rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox);
+ if (defer_acc) {
+ /* So the order here should be:
+ * Issue CONFIG_LINK mbox
+ * CONFIG_LINK cmpl
+ * Issue PLOGI ACC
+ * PLOGI ACC cmpl
+ * Issue REG_LOGIN mbox
+ */
+
+ /* Save the REG_LOGIN mbox for and rcv IOCB copy later */
+ link_mbox->context3 = login_mbox;
+ login_mbox->context3 = save_iocb;
+
+ /* Start the ball rolling by issuing CONFIG_LINK here */
+ rc = lpfc_sli_issue_mbox(phba, link_mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED)
+ goto out;
+ return 1;
+ }
+
+ rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, login_mbox);
if (rc)
- mempool_free(mbox, phba->mbox_mem_pool);
+ mempool_free(login_mbox, phba->mbox_mem_pool);
return 1;
out:
+ if (defer_acc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "4577 pt2pt discovery failure: %p %p %p\n",
+ save_iocb, link_mbox, login_mbox);
+ if (save_iocb)
+ lpfc_sli_release_iocbq(phba, save_iocb);
+ if (link_mbox)
+ mempool_free(link_mbox, phba->mbox_mem_pool);
+ if (login_mbox)
+ mempool_free(login_mbox, phba->mbox_mem_pool);
+
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_OUT_OF_RESOURCE;
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL);
--
2.25.1
Powered by blists - more mailing lists