linux-kernel - [PATCH v2 02/11] spi: dw-dma: Fail DMA-based transfer if no Tx-buffer specified

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200920112322.24585-3-Sergey.Semin@baikalelectronics.ru>
Date:   Sun, 20 Sep 2020 14:23:13 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Mark Brown <broonie@...nel.org>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>,
        Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        Peter Ujfalusi <peter.ujfalusi@...com>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Feng Tang <feng.tang@...el.com>, Vinod Koul <vkoul@...nel.org>,
        <linux-spi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 02/11] spi: dw-dma: Fail DMA-based transfer if no Tx-buffer specified

Since commit 46164fde6b78 ("spi: dw: Fix Rx-only DMA transfers") if DMA
interface is enabled, then Tx-buffer must be available in each SPI
transfer. It's required since in order to activate the incoming data
reception either DMA or CPU must be pushing data out to the SPI bus.
But the DW APB SSI DMA driver code is still left in state as if Tx-buffer
might be optional, which is no longer true. Let's fix it so an error would
be returned if no Tx-buffer detected and DMA Tx would be always
enabled.

Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
 drivers/spi/spi-dw-dma.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index a7ff1e357f8b..1b013ac94a3f 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -262,9 +262,6 @@ dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
 	struct dma_slave_config txconf;
 	struct dma_async_tx_descriptor *txdesc;
 
-	if (!xfer->tx_buf)
-		return NULL;
-
 	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
@@ -383,17 +380,19 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 imr = 0, dma_ctrl = 0;
+	u16 imr, dma_ctrl;
 
-	if (xfer->tx_buf)
-		dma_ctrl |= SPI_DMA_TDMAE;
+	if (!xfer->tx_buf)
+		return -EINVAL;
+
+	/* Set the DMA handshaking interface */
+	dma_ctrl = SPI_DMA_TDMAE;
 	if (xfer->rx_buf)
 		dma_ctrl |= SPI_DMA_RDMAE;
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	if (xfer->tx_buf)
-		imr |= SPI_INT_TXOI;
+	imr = SPI_INT_TXOI;
 	if (xfer->rx_buf)
 		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
 	spi_umask_intr(dws, imr);
@@ -412,6 +411,8 @@ static int dw_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 
 	/* Prepare the TX dma transfer */
 	txdesc = dw_spi_dma_prepare_tx(dws, xfer);
+	if (!txdesc)
+		return -EINVAL;
 
 	/* Prepare the RX dma transfer */
 	rxdesc = dw_spi_dma_prepare_rx(dws, xfer);
@@ -423,17 +424,15 @@ static int dw_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 		dma_async_issue_pending(dws->rxchan);
 	}
 
-	if (txdesc) {
-		set_bit(TX_BUSY, &dws->dma_chan_busy);
-		dmaengine_submit(txdesc);
-		dma_async_issue_pending(dws->txchan);
-	}
+	set_bit(TX_BUSY, &dws->dma_chan_busy);
+	dmaengine_submit(txdesc);
+	dma_async_issue_pending(dws->txchan);
 
 	ret = dw_spi_dma_wait(dws, xfer);
 	if (ret)
 		return ret;
 
-	if (txdesc && dws->master->cur_msg->status == -EINPROGRESS) {
+	if (dws->master->cur_msg->status == -EINPROGRESS) {
 		ret = dw_spi_dma_wait_tx_done(dws, xfer);
 		if (ret)
 			return ret;
-- 
2.27.0