linux-kernel - Re: [PATCH 0/7] Pine64 PineCube support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 25 Sep 2020 17:12:41 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Icenowy Zheng <icenowy@...c.io>
Cc:     Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 0/7] Pine64 PineCube support

Hi,

On Wed, Sep 23, 2020 at 08:57:02AM +0800, Icenowy Zheng wrote:
> Pine64 PineCube is an IP camera based on Allwinner S3 chip.
> 
> This patchset tries to add support for it.
> 
> In order to make sure the system do not hang when camera is brought up,
> a fix to AXP209 driver is needed (sent individually), otherwise the
> system will hang because it changes the voltage of LDO2 when LDO4
> tweaking.

Queued all the patches for 5.11

> Icenowy Zheng (7):
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
>   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
>   dt-bindings: arm: sunxi: add Pine64 PineCube binding
>   ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera

However, I guess for the next patches to the v3s DTSI we should just
have a simpler prefix (like v3), it's really taking a lot of characters
here :)

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)