linux-kernel - Re: [PATCH] drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200928130141.GV6112@intel.com>
Date:   Mon, 28 Sep 2020 16:01:41 +0300
From:   Ville Syrjälä <ville.syrjala@...ux.intel.com>
To:     Lyude Paul <lyude@...hat.com>
Cc:     nouveau@...ts.freedesktop.org, Ben Skeggs <bskeggs@...hat.com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        "open list:DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS" 
        <dri-devel@...ts.freedesktop.org>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drm/nouveau/kms/nv50-: Fix clock checking algorithm in
 nv50_dp_mode_valid()

On Tue, Sep 22, 2020 at 05:05:10PM -0400, Lyude Paul wrote:
> While I thought I had this correct (since it actually did reject modes
> like I expected during testing), Ville Syrjala from Intel pointed out
> that the logic here isn't correct. max_clock refers to the max symbol
> rate supported by the encoder, so limiting clock to ds_clock using max()
> doesn't make sense. Additionally, we want to check against 6bpc for the
> time being since that's the minimum possible bpc here, not the reported
> bpc from the connector. See:
> 
> https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
> 
> For more info.
> 
> So, let's rewrite this using Ville's advice.
> 
> Signed-off-by: Lyude Paul <lyude@...hat.com>
> Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
> Cc: Ville Syrjälä <ville.syrjala@...ux.intel.com>
> Cc: Lyude Paul <lyude@...hat.com>
> Cc: Ben Skeggs <bskeggs@...hat.com>
> ---
>  drivers/gpu/drm/nouveau/nouveau_dp.c | 23 +++++++++++++----------
>  1 file changed, 13 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
> index 7b640e05bd4cd..24c81e423d349 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_dp.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
> @@ -231,23 +231,26 @@ nv50_dp_mode_valid(struct drm_connector *connector,
>  		   const struct drm_display_mode *mode,
>  		   unsigned *out_clock)
>  {
> -	const unsigned min_clock = 25000;
> -	unsigned max_clock, ds_clock, clock;
> +	const unsigned int min_clock = 25000;
> +	unsigned int max_clock, ds_clock, clock;
> +	const u8 bpp = 18; /* 6 bpc */

AFAICS nv50_outp_atomic_check() and nv50_msto_atomic_check()
just blindly use connector->display_info.bpc without any fallback
logic to lower the bpc. So Ilia's concerns seem well founded.
Without that logic I guess you should just use
connector->display_info.bpc here as well.

>  	enum drm_mode_status ret;
>  
>  	if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace)
>  		return MODE_NO_INTERLACE;
>  
>  	max_clock = outp->dp.link_nr * outp->dp.link_bw;
> -	ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd,
> -						  outp->dp.downstream_ports);
> -	if (ds_clock)
> -		max_clock = min(max_clock, ds_clock);
> -
> -	clock = mode->clock * (connector->display_info.bpc * 3) / 10;
> -	ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
> -					    &clock);
> +	clock = mode->clock * bpp / 8;
> +	if (clock > max_clock)
> +		return MODE_CLOCK_HIGH;

This stuff vs. nouveau_conn_mode_clock_valid() still seems a bit messy.
The max_clock you pass to nouveau_conn_mode_clock_valid() is the max
symbol clock, but nouveau_conn_mode_clock_valid() checks it against the
dotclock. Also only nouveau_conn_mode_clock_valid() has any kind of
stereo 3D handling, but AFAICS stereo_allowed is also set for DP?

> +
> +	ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, outp->dp.downstream_ports);
> +	if (ds_clock && mode->clock > ds_clock)
> +		return MODE_CLOCK_HIGH;
> +
> +	ret = nouveau_conn_mode_clock_valid(mode, min_clock, max_clock, &clock);
>  	if (out_clock)
>  		*out_clock = clock;
> +
>  	return ret;
>  }
> -- 
> 2.26.2

-- 
Ville Syrjälä
Intel