linux-kernel - [PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 29 Sep 2020 16:18:02 +0300
From:   Tomer Maimon <tmaimon77@...il.com>
To:     robh+dt@...nel.org, mark.rutland@....com, avifishman70@...il.com,
        tali.perry1@...il.com, venture@...gle.com, yuenn@...gle.com,
        benjaminfair@...gle.com, joel@....id.au
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        openbmc@...ts.ozlabs.org, tmaimon77@...il.com
Subject: [PATCH v8 0/5] arm: dts: add and modify device node in NPCM7xx device tree

This patch set adds and modify device tree nodes in the NPCM7xx
Baseboard Management Controller (BMC) device tree.

The following device node add:
        - NPCM7xx Pin controller and GPIO
        - NPCM7xx PWM and FAN.
        - NPCM7xx EHCI USB.
        - NPCM7xx KCS.
        - NPCM Reset.
        - NPCM Peripheral SPI.
        - NPCM FIU SPI.
        - NPCM HWRNG.
        - NPCM I2C.
        - STMicro STMMAC.

The following device node modified:
        - NPCM7xx timer.
        - NPCM7xx clock constants parameters.

NPCM7xx device tree tested on NPCM750 evaluation board.

Changes since version 7:
Address comments from Joel Stanely: https://www.spinics.net/lists/devicetree/msg380191.html

Changes since version 6:
Split commits.
 
Changes since version 5:
Address comments from Joel Stanely: https://lkml.org/lkml/2020/9/16/994
 
Changes since version 4:
 - Tested patches in Linux kernel 5.9.

Changes since version 3:
 - Tested patches in Linux kernel 5.6.

Changes since version 2:
 - Remove unnecessary output-enable flags.

Changes since version 1:
 - Add NPCM reset device node.
 - Add reset parameters to NPCM driver device nodes.


Tomer Maimon (5):
  arm: dts: modify NPCM7xx device tree clock parameter
  arm: dts: modify NPCM7xx device tree timer register size
  arm: dts: add pinctrl and GPIO node to NPCM7XX device tree
  arm: dts: add new device nodes to NPCM7XX device tree
  arm: dts: add new device nodes to NPCM750 device tree EVB

 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 967 +++++++++++++++++-
 arch/arm/boot/dts/nuvoton-npcm750-evb.dts     | 367 ++++++-
 .../boot/dts/nuvoton-npcm750-pincfg-evb.dtsi  | 157 +++
 arch/arm/boot/dts/nuvoton-npcm750.dtsi        |  24 +-
 4 files changed, 1495 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi

-- 
2.22.0